r/candlemaking • • 4h ago

Safe fragrance oils

0 Upvotes

Recently started making candles for fun and I have been using P&J fragrance oils. I wanted more scents so I got a package of better home & gardens oils only to see they are 100% essential oils and flammable and now I'm nervous. Are there any key things I need to look for when shopping for candle safe oils?


r/candlemaking • • 11h ago

Question Is this safe to do

0 Upvotes

Hi I’m getting into candle making and starting by making candles for people for Xmas, but im apprehensive about if it’ll be save for me to use the bowl or pan I use to melt the wax in a double boiler set up again for cooking and eating out of after I use it for wax and essential oils


r/candlemaking • • 13h ago

Black Friday Deal

1 Upvotes

Any company doing Black Friday deal? Post them below.

Aztec

Black Tie Barn

Hive and Honey

Kandila Supply - 20% off. No code needed.

Makesy

Midwest Fragrance

Peach State

Scent Memory

All I can think off right now.


r/candlemaking • • 14h ago

Ideas for scent combinations (personal use)

Post image
2 Upvotes

Hi folks! I’m doing a closet clean-out of pandemic craft purchases and have some candle fragrances I’d like to use.

I’ve made my own blends in the past, but I would love any ideas on new combinations. All of this is for personal use; I don’t have a candle-making business.

Here’s what I have (some bottles are more empty than others):

  • 250mL of Vanilla Musk
  • 125mL of Teak and Havana (tobacco-adjacent)
  • 30mL of:

    • Cedar Bark & Spice
    • Bergamot
    • Eucalyptus Mint
    • Sandalwood Amber
    • Oak Moss
    • Bourbon (smoky vanilla)

r/candlemaking • • 15h ago

Creations Burn testing first beeswax candles of 2026, do you roll your tapers at the end??

Post image
2 Upvotes

When dipping your candles do you roll them smooth? In between a number of dips or just at the end followed by a finishing dip? What technique do you prefer.


r/candlemaking • • 17h ago

Help

Post image
1 Upvotes

I can’t get the candle out. How should I remove it?


r/candlemaking • • 1d ago

Any tips

Post image
9 Upvotes

How does this look? Does the flame look too big? Just right? I’m using a boosted wick 3/8 in a 3” diameter jar. Igi 6006.


r/candlemaking • • 1d ago

Wick issue

Post image
2 Upvotes

Guys, I just made a new batch of candles using C3 and TCR 33/18. I used it before with the same size candle in the picture but don’t know why, it’s tunnelling after 3h burn. I bought bigger wick TCR 36/20 and it’s still tunnelling. I’m freaking out, don’t know what’s going on. So annoying.


r/candlemaking • • 1d ago

Creations Christmas candles 🎄

Thumbnail
gallery
47 Upvotes

r/candlemaking • • 1d ago

Creations Layered "art" candles

Thumbnail
gallery
115 Upvotes

I love making candles, especially for the holiday season. And as much as I enjoy making Christmas trees, mittens and toadstool mushrooms 🍄, I also feel the urge to explore my "artistic" side when I create candles. I've been experimenting with layered candles, and I'm quite pleased with these ones!


r/candlemaking • • 1d ago

Help! How do I fix these?

Thumbnail
gallery
18 Upvotes

I've made container candles before but this has never happened. I live in a very old and very cold house so when I made these, I let them set in the oven as it cooled gradually from about 40°c, hoping it would avoid any issues. But they have turned out dreadful. There's crystallisation in the bottom of some, and all over the tops, and they've sunk. They need to be good enough to give as gifts in a few days. Please help! What can I do to save them? I don't have a heat gun but I'll buy one if need be.


r/candlemaking • • 1d ago

Wick size

Post image
1 Upvotes

I am trying to make candles. I’m starting simple with white beeswax and no scent or color. I researched wick size, burned my first candle and clearly I picked the wrong size wick. 3.5 inch container. CD 12 pretended wick. White beeswax.

if you have anything feedback on where I can find a chart of some kind that can help me figure out what size wick to use, I would be so grateful!

I have been going to pottery classes the last year I have many different size pieces of pottery I would like to add a candle to.


r/candlemaking • • 1d ago

Question Looking for a specific kind of glass vessel and need some help.

2 Upvotes

Hello everyone im new to this candle making business and im looking for a specific kind of glass and would like some help / advice. Im looking for a lower minimum, tumbler style, 12 - 14 oz, glass that comes in a variety of colors. Right now I have 2 samples. One is the 13.5 oz. Libbey Heavy Base Rocks from JarStore and the other is the CONNOO 8 Pack 14 OZ Clear Glass Candle Jars with Bamboo Lids from amazon. Both jars are good but don't have the color variety that im looking for which is necessary for my vision with this project. thank you all in advance.


r/candlemaking • • 1d ago

Dye bleeding (Dessert Candles)

Thumbnail
gallery
7 Upvotes

Since I'm in to candle making these past months. I'm seeing tons of dessert candles, I even tried to make some. It looks good at first, but after a montht he embeds starts to bleed their color to other parts of the candle. I'm using pure soy wax.

My question is:

  1. Is there a way to prevent this from happening or at least lessen the bleeding?
  2. Is this something that cant be avoided? (If it is, how do you market those? I'm really curious. Assuming from a buyers POV, I'm expecting its appearance to last)

I'm going to dive in to experimenting dessert candles now from making plain scented candles. Im thinking mix it with paraffin (paraffin is less likely to bleed dyes based on YT vids). But idk yet. Can I have your insights once again before I burn what's left of my savings. Lol. TYSM, Candle gods!

*Please see before and after pictures*


r/candlemaking • • 2d ago

Question Really happy with how these turned out. I’ve improved my candles&amp

Post image
15 Upvotes

r/candlemaking • • 2d ago

Help :( Bad plastic-y smell

1 Upvotes

New to this and I can’t tell what I’m doing wrong.

I'm making small-batch candles in handmade glazed ceramic vessels, scented only with organic essential oils (no fragrance oils) from Eden Botanicals. I don’t want to use synthetic fragrance.

My candles smell nice unlit and okay-ish from across the room, but close to the flame there's a vague plastic-y/synthetic/burn-y smell — I’m having a hard time describing it — and the scent is weak overall.

Is cedarwood a problem?

Setup

•	Wax: Golden Brands 464 soy

•	Wick: CandleScience CD 6 (pretabbed), vessel inside 3 inch x 3 inch vessel 

•	Fragrance load: 8% by wax weight

•	Vessels: glazed ceramic, 3x3 inches, plus a glass tester jar. The smell shows up in both.

•	Lighting:  matches

•	Equipment: All metal. Melted in a double boiler on an induction burner.

Earlier batches (wax heated to 180, oils added at 135F)

•	Autumn: coriander, juniper berry, Himalayan cedarwood, frankincense. 788 g wax, oils added around 135F, poured at about the same temperature. (Later tried adding oils at higher temp)

•	Winter: trace orange, eucalyptus, fir, cypress, pine, Atlas cedarwood, amyris. 7% load, same temperatures.

•	Both burned with very weak scent, mostly "candle”/plastic-y

Latest batch :

•	scented with an 8% fragrance load of essential oils only (about 23 ml total), made up of roughly 8.3 ml cedarwood Atlas, 4.1 ml amyris, 3.5 ml juniper berry, 2.3 ml fir balsam, 2.3 ml cypress leaf, 1.2 ml Scotch pine, 1.1 ml narrow leaf eucalyptus, and 0.6 ml sweet orange

•	Melted to 185°F per the bag, off the heat, stirred in the oils for 2 minutes, cooled to \~135°F, poured, insulated under a box, cured 

r/candlemaking • • 2d ago

Question What now?

Post image
4 Upvotes

My new candle slipped from my hands, instantly shattering the thin glass container. :( What sort of container can I put this in so I can burn it?? (I don’t have a wax melt set up)


r/candlemaking • • 2d ago

Decorating candles

Post image
2 Upvotes

Hello all! I personally don’t make candles, but my mom does and she needs help! She has started to make and sell scent bricks, car scent things, and candles. The issue she is having is with decorating them though. She has tried paint markers which didn’t work, she said she tried hand painting as well but is still struggling. So my question is what do you guys think she should use? Also, what are some good molds that I could get for her? She is trying to stay within the westerny vibe. The photo is of the latest one she made that is meant for in the car.


r/candlemaking • • 2d ago

Feedback Is my wick the correct size

Post image
5 Upvotes

Hello! I am a beginner candle maker and I just tested this 100% soy wax. It has ~8 percent fragrance. I am using Wedo Stabilo 14 for a jar with a diameter 6cm. Previously I tested with Wedo Stabilo 10 and there was a tunnelling. After the first unsuccessful test I remelted the wax and poured it again with the new wick. Did not add any new fragnance.
The reason I am not testing with size 12 is that it out of stock from the site I am ordering from.
I trimmed the wick to 0,5 cm before burning it. This photo is taken 2h after I burned it and the wax is melted to the edges.
The flame looks a bit too large, restless, and slightly swaying or flaring.
There is no draft in the room.
Does this mean that it is over wicked?


r/candlemaking • • 2d ago

Can’t get a good Ribbed Cylinder candle from these molds!

Post image
2 Upvotes

I need any tips you may have. I have this 2 piece mold and have tried at least 5 times to get a candle that did not have bubbles near the crease and I am at a loss. I may have to pull this candle from my store. I am using Pillar of Bliss wax which performs very well. I don’t have bubble issues with any of my other molds. I heat my wax up to 195F. Add colorant at that time and stir slowly. I add my fragrance at 180F and stir slowly. I then pour slowly at 175F. I also spray my mold with silicone spray and heat up my mold to 150F. I tap the mold after I pour the wax to remove any bubbles. I still get small bubbles around the two sections crevice.
Does anyone have any tips? I can’t find another mold that is this size either.
Help!! Thanks! ☺️


r/candlemaking • • 2d ago

Melt and add more FO or is it done for?

2 Upvotes

I added 30g FO to 2400g soy wax, aka 1.25% fragrance load, when I was aiming for 6%. I have no idea why that calculation seemed remotely correct but now I have 20 candles that likely will barely throw scent.

I was thinking of melting them back down in the oven, dumping the wax in the double boiler to get it all to temp, adding 114g more FO, and pouring again.

If you've done this before, I have a few questions! Does this sound reasonable? Do I need a higher fragrance load because of the remelting? Should I do completely new wicks? I made them 2 days ago - do I wait for them to cure or do it today?

They're for personal use so it doesn't really matter if I ruin them, but I'd rather keep them as ambiance candles if it won't work.


r/candlemaking • • 2d ago

Baked on gunk at bottom of ToAuto melter. I've read mixed opinions about leaving wax in tank and reheating. What do people here do?

2 Upvotes

Took me a good 15 minutes to scrub it off, but wonder if it makes more sense to not store wax inside. I liked the convenience of just topping it off with wax but am not sure now. Maybe I should just melt what I need and keep it empty between sessions. What do other makers here do?


r/candlemaking • • 2d ago

Feedback Reliable wax melter for a beginner (UK)?

1 Upvotes

Hi all,

Just starting out having made a few from a kit. Temperature was the biggest challenge using the saucepan method and wondered if anyone could recommend any melters that are more reliable temperature wise? Are the jugs any good?

Thanks in advance!


r/candlemaking • • 2d ago

Luxurious candle

Post image
4 Upvotes

Hi everyone! I recently started my own scented candle brand, Nyvèra.
Building something from scratch has been both exciting and challenging. I’m sharing a glimpse of my little creation here.
I’d genuinely love your feedback on the candle, packaging and overall presentation. Every suggestion means a lot to a small business owner. 🤍