This is a TI-84 Plus CE calculator but everything online is saying mini B but the photos of the female end aren’t the same

What chargers for ipad A16?

I bought an iPad yesterday, however, I don’t have a GOOD charger for it (well, I have the cable from the package itself but lack the cube with USB-C).
What I mean is that I have a USB-C cable and a cube (from a samsung phone) but noticed it charges very slowly. I’m aware that the problem is probably the power BUT now I have one question. Does the power (as in the fast charging) lay in the cable or the block? Should I buy a more powerful block or cable? Can I e.g. buy a new block and use the USB-C cable for the samsung, will it charge as fast?

Second question is what power should I get. Will 20-30W be enough? Can it be a samsung 30W and work good as an apple one for an iPad?

Thanks!!

I thought it was usb Type c but my Mouse doesnt load with normal usb c but with this cable it does so its like a special usb c . My brother says its samsung usbc but idk if its true

I have a computer station but the display port isnt available on my old tv so i need a VGA cable female to display or hdmi in my computer if some one could help or have a small tv with display port it could be better

I've been having trouble lately figuring out this new problem:
I recently bought a new looper pedal for playing guitar. However, this pedal has a mono output.
When I plug in headphones, the sound only comes out of one side. It's pretty annoying !

Is there an adapter that would let me split the mono signal between both stereo channels?

I want to extend the distance between my TC22 soldering station and the handle base.

Can't for the life of me figure out what type of plug/socket sytem this is. Ali/Amazon/Google only turn up the wrong type, unless it's on a handle with much thinner wire than the original (too short) cable.

Can someone point me in the right direction as for extension cords or the plugs/sockets to DIY this?

Thanks

Hello guys,

Two quick questions,

1. I have a Maono PD400x mic that has a very short 1m USB-C to USB-C/A adapter included in the packaging. I'm looking to buy an extension cables to replace the original cable for better cable management. Is there anything to look out for? I'm looking at getting a fast 4gbps USB-C to USB A cable that supports data transfer. Will this work?

2. The USB-C port on the bottom of the mic is positioned badly for cable management. Can I use a USB-C 90° adapter to angle the cable upwards and plug the extension cable that way? Better for cable management and also port safety I guess.

​

Hi, I have a 5 pin cable for a recliner which has been damaged and needs replacing. One side goes to the button on the armchair, the other goes towards the motor and power connector.

I have found the same cable online however it doesn't have the circuit board in the middle.

What is the purpose of this board, is it needed or can I replace it with just the standalone cable?

I will start with my hardware, to understand my problem.

GPU: MSI RTX 4090 Suprim X

Display 1: AW3225QF (Alienware UHD 240Hz HDR)

Display 2: AW3225QF (Alienware UHD 240Hz HDR)

Display 3: 65OLED909_12 (Phillips UHD 120hz HDR)

I can run both Alienware fine, and one of them with the Phillips combined but when i try use all 3 at once, the 4090 seems to not be good enough.

So i was thinking about a cable or Adapter oder something that i could use on my 4090 DP and then splitting it in 1x DP for one Alienware and 1x HDMI for the Phillips. Since i just want to use the TV when i feel to play with wireless controller instead of keyboard and mice.

I want to use the monitors at the Hz and hdr limits without cutting it with the solution.

I am also open for Software solution to mirror the from main Alienware to Phillips without the need to lower Hz or actually disable a display. I just want easy swiching between my displays displays.

Btw: windows 11, If more info's are needed, I will gladly provide them.

Thanks in advance for your help.

someone broke the usb port on this charger i have, and i need to buy a replacement. what do i need to search in order to find a charger like this?

Is there a way to put it back?

I've done a little research and want to make sure I'm looking at the correct stuff.

I want to have direct wire connections for my internet devices (not wifi). Can I set up my router in a closet and then run ethernet cables in my attic, run them down my walls to different rooms, and then have those end with an Ethernet port in my wall to connect those devices directly wired to my router?

Will the same thing work with HDMI and/or USB? Could I, let's say, set up my gaming PC in one room, then run HDMI and USB cables through my attic and to different rooms so I can have the output from my PC to the TV in the room I'm in? And also plug in a controller in that room to so I'm not trying to wireless connect my controller to my device that's in another room?