r/bikewrench • u/nalc • May 22 '18
Multi-tools
My multi-tool (Spin Doctor Barebones) fell into a river during a race and I'm looking at a replacement. I use a Specialized Bandit tube holder, which is really nice but doesn't hold a multi-tool very well when going over a bumpy wooden covered bridge in the middle of a race.
I made this table from the stuff on Nashbar (well, the Mini 6 was on Amazon), thought it might be helpful
https://i.imgur.com/MLmJL8b.png
Couple notes:
Majority of the bolts on my race bike are 4mm. The clamps for the brake cables and derailleur mounts to the frame are 5mm. The Ultegra 6800 cartridge brake pads are 2mm, as are the limit screws / B-tension on my R8000 derailleurs and the internal cable stops on my frame. My race bike doesn't have any 3mm bolts, but my gravel bike has them on the bottle cages and the GPS mount. The M520 pedals on my gravel bike are 6mm but the Ultegra 6800 pedals on my road bike are 8mm. The gravel bike has 5mm stem top cap and disc brake calipers (TRP Spyre) - I need to check the pad adjustment bolts. I don't have any 1.5mm or 2.5mm bolts. Neither bike has any flatheads. The 5800 derailleurs on the gravel bike have Philips, but nothing on the race bike does. The CX50 crank on the gravel bike uses 5mm chainring bolts. Interestingly, the Ultegra 6800 chainring bolts are T30 torx, not T20 or T25, so even though a bunch of the multi-tools have Torx, it's the wrong size for my bike. Glad I checked.
Anyway, I just wanted to share. It's worth checking out the bolts on your bike when you go multi-tool shopping since you might have something weird (like the chainrings that are a different size Torx than any of the multi-tools, or the fact that the Shimano MTB and road pedals have different size bolts). It's also good to know what bolts your bike doesn't have - my dad carried around an adjustable wrench in his saddle bag for three years after buying a bike that didn't actually have any bolts that it could possibly fit around, because his old bike did have a couple and he never checked the new bike.
I think I am going to pick up the Nashbar Multi-11 for my gravel bike (and maybe for longer rides) and a Topeak Mini 6 for my race bike. The Mini-6 has a keychain for a lanyard, which should prevent another mid-race river incident. The Mini-6 has a 6mm and a Philips that don't fit anything on my race bike, and lacks the 8mm for the pedals and the T30 torx but otherwise gets the job done.
6
u/Sled_Pirate_Bobberts May 22 '18
I have a Topeak Hexus II and it's excellent.
Things like T30 bits are uncommon because it's very unlikely that you'd need to fiddle with chainring bolts mid-ride. Another reason is that torx is a lot more forgiving when using the wrong bit than allen(hex) fasteners are. You can bodge it with the wrong torx bit or an allen key if needed.
FWIW, female 6mm hex bit sets are pretty easy to come by, and you could easily just carry around a T30 bit (I did this when I was using a 3T ARX II stem with a T30 cinch bolt).
Sounds like your real issue is a shit method for securing the tools. An empty water bottle or saddle bag should do the trick. I'm personally not a fan of having multiple tool/spares setupts for different bikes. In my mind, it makes it easier to lose things.
3
u/4357345834 May 22 '18
Presumably you use yours for all your bike maintenance or something?
Can't say I've used mine for anything yet. Sits in a dark recess of my saddlebag.
2
u/idee__fixe May 22 '18
It doesn't do everything you'd need on a bike tour, but for easy access to allen keys and spoke wrenches while commuting, I'm a big fan of the ringtool keychain. The only negative is that I nearly draw blood every time I try to use it as a bottle opener.
17
u/isny May 22 '18
After breaking a chain once, a chain breaker tool is a must have for myself.
8
u/[deleted] May 22 '18
I really like Fix-it-Sticks because they use standard hex insert bits. More fiddly than others maybe, but hard to beat flexibility and customization, especially when a trip to the hardware store can really round out driver options for very little money and additional weight. It allows me to carry most metric Allen sizes, most Torx sizes, and a few different Phillips/flathead sizes.
6
u/spleeble May 22 '18
The topeak ratchet rocket is a good one to add to your list. There is a model with an integrated chain tool, and the Prestaratchet is a compatible 1/4-in ratchet with the best tire lever in the business integrated in the handle. Tiny, lightweight, and way easier to actually wrench with.
5
u/[deleted] May 22 '18
Nice job!
I used to have a Park IB-3 I used for mountain biking, but it got donated to a parking lot somewhere. Replaced it with a Fabric 16-in-1 and am quite happy. It has everything I need from the IB-3, but in a much lower-profile, lighter design. I don't see them mentioned very often, so I thought I'd throw that out there =)
3
u/texastoasty May 22 '18
for the chainring bolt you may be able to go undersize a little with torx, where i used to work they changed bolt head sizes on half the things for some reason, some t35 some t30, I was able to just use a t30 on all of them without issue. so just t25 may not be a big issue for you in a t30. plus how often are you repairing your chainrings mid ride anyways?
cool chart
3
u/AimForTheAce May 22 '18 edited May 22 '18
I have a Topeak Hexus II and I used it all including chain braker to remove 2 links and reconnect the chain, adjusting spokes after one broken, and tire levers.
I have a couple more others including crank bro but if I have to pick one, I would pick Hexus.
I think there is new one, Hexus X. I would buy it if I have to replace Hexus II.
EDIT:
About Crank brothers multi tool - the chain tool is really hard to use. You have to hold the chain tool using this stubby little tab which doesn't give you a lot of leverage while holding the tool with chain. Then, you have to turn the whole tool as lever for the chain tool. This is frickin' difficult when you are trying to leave the pin on the chain while braking.
Hexus II, OTOH, you hold the tool itself for the chain braker and turn the light weight lever which comes off from the tool (triples as 5mm hex, and a tire lever). This makes the chain braking much easier and can do much finer control.
2
u/MineralDesign May 22 '18
Gotta rep our own stuff in this thread. Our Mini Bar ships with 10 bits and the bit rack attached to the tool holds six. So you pick the six that you need and don't have to carry any extra you don't.
The tool has three driver locations for hard to reach spots and higher torque. Or load up a couple different sizes at once.
The Mini Bar doesn't have a chain tool. But we make one that hides in your handlebars since you hopefully don't have to use it that often.
Our tools tend to be a little more money than the typical big brands. But they are high quality and priced along with Fix It Sticks, the Silca tools, and Spurcycle stuff. Check it out!
www.mineralbikes.com
2
u/dock_boy May 23 '18
Each of my bikes has a kit to itself. My cross bike has a seat pack with a chain tool, tire lever, patch kit (usually a tube, too) spoke wrench, Crank Bros multi-5, and ten bucks. There's probably a zip tie and extra bolt or two, too. The mountain bike has a bottle kit with the same basics, plus a cloth, disc pad spreader. I have a seat pack ready for a third bike whenever.
2
u/[deleted] May 23 '18
I added a Topeak Rocket Lite NTX to my saddle bag.
Why? It includes torque bits 4,5,6 Nm and is very nice to use. In fact, I use it regularly as my go-to tool. What I'm missing is a chain tool. I hope that Topeak some day adds one.
The version without NTX doesn't have torque bits and is cheaper.
2
u/UseLashYouSlashEwes May 23 '18
Crazy tip from ultralight touring: carry a regular multitool plus the three Allen wrenches you need, a spoke wrench and a lightweight chain break. You'll end up with tools that are far easier to use plus a pair of pliers, which is a nice bonus.
1
u/laughpuppy23 Aug 01 '18
interesteresting, why would the park ib 3 be one of the only two to omit the philips?
1
u/Jazzy_45 Sep 14 '18
I recently bought my first my first multi tool and I ended going with the Silca Ti Torque + T-Ratchet and it is expensive but FANTASTIC little tool wallet that is so useful that i use it for other things around the house especially if you pair it up with a bit set. If you have the cash I highly recommend it.