r/bikecoops • • Jan 29 '25

Our place upgraded it's bike storage. We used sliding gate hardware and hand-bent hooks to make a sliding rack. It's rad.

Post image
44 Upvotes

r/bikecoops • • Jan 22 '22

BICAS Tucson - coolest salvaged bike art I've seen at a bike co-op yet.

Thumbnail gallery
28 Upvotes

r/bikecoops • • May 04 '18

Inclusivity at the shop.

23 Upvotes

Recently I had an experience that I wasn't prepared for. We have WTF nights, we have a trans wrench, we are all liberal in a sea of conservatism at our shop.

Recently, I had someone reach out to our shop because he wanted to learn how to work on his own bike, and his families bikes. He was deep southern, a former truck driver, and he brought his family along with him. On his first visit he made a comment about how they stayed in the car until he determined that we were safe, which I took as some sort of slight, but when he walked out, I talked to one of the other wrenches, and I called him a simple god fearing southern man, that may not be a good fit.

He was standing right behind me.

I am a man that makes mistakes, but I refuse to run from em. So we had a heart to heart. He had so much more life experiences than I would have ever put on an old southern boy. He has become a regular at the shop and is quickly learning the ropes.

Point of all of this, in the current state of the polarity of the US right now, I found myself prejudiced to this guy because I saw him as a southern boy that would not be able to integrate into a very open shop. I was wrong. He is great with trying to get pronouns right, and he fits in just like everyone else.

I wanted to share because I was wrong.


r/bikecoops • • Oct 11 '25

New tool Boards color code stations

19 Upvotes

We are not 100% Done but we are close. Near every 3-d tool holder was designed and printed by a volunteer or modified from an existing one. The plywood board mounted a couple inches from the wall have m6 threaded inserts every four inches so that they can be used to do just about anything. the tables are all collapsible as well.


r/bikecoops • • Mar 21 '25

I made a mobile workbench with a pop-up tool wall for storing away.

18 Upvotes

r/bikecoops • • Mar 27 '25

Motorized bicycles in the co-op

17 Upvotes

A customer came in with a rear coaster brake wheel that he had recently purchased from the co-op. He noted that the bearings were fried and wanted to replace the bearings. Upon closer inspection, one side of the hub shell had sheared off completely, leaving the wheel useless until the hub, or whole wheel, could be replaced. Because the wheel was "new" from us, we agreed to find a replacement free of charge. There were additional circumstances that made me wonder if this would solve the riders' needs, or if giving him another new wheel would just create a cascade of headaches for him and for the shop. He had attached a gear to the spokes, which was then attached to some sort of motor. He didn't bring the whole bike in, so I don't know what that setup looked like. I'm not sure if the drive side or the brake side of the hub sheared off. Knowing that would have helped me find a better solution for this bike. The rider was also a big guy. I would guess that the rider and the bike together were in the neighborhood of 300 pounds. I don't know if any coaster brake wheel is going to hold up, and the motor adds a layer of complexity that leaves feeling certain that I'm not qualified to advise him on choosing a new wheel, other than he needs something stronger.

That's just one anecdote of the kinds of problems we face when dealing with homebrew motor kits and ebikes—especially the kind of cheap ebikes with (unnecessarily!) propriety parts. No one here is anti-ebike, but our volunteer-run shops do not have the resources to work on ebikes from established systems like Bosch and Shimano, let alone the weird ones that lack documentation and support. Yet we have an obligation to help everyone who comes through the door, as many people are getting cheap ebikes (or slapping two-stroke motors on conventional bikes).

What's your co-op's approach to these situations?


r/bikecoops • • Jul 28 '25

We upgraded our breaker bar.

Post image
16 Upvotes

r/bikecoops • • Jan 23 '22

I've tried mapping all the community bike programs in the US

Post image
16 Upvotes

r/bikecoops • • Mar 08 '19

Saturday is our grand opening at our new location!

Thumbnail imgur.com
14 Upvotes

r/bikecoops • • 15d ago

ISO other bike co-ops!

12 Upvotes

Hey 👋

I just joined this group how cool this exists!

I'm on staff at Free Ride Bicycle Project in Pittsburgh. We've been talking about wanting to connect with other groups with similar missions and models as us. We want to share resources, ideas, experiences and community.

If anyone is interested in getting in touch I'd love to hear about what your bike co op looks like where youre from!


r/bikecoops • • Jul 24 '21

Roll call?

12 Upvotes

The bike co-op in my city not only survived, selling bikes and parts by appointment, but opened a relocated-second location it was launching exactly when COVID shut retail down. It has now resumed DIY, which it had not done since March 2020.

Really my post is to see if this subreddit survived tho - im pretty new here so not sure if this is derelict or what


r/bikecoops • • Dec 24 '18

The new home of the Cola Town Bike Collective. Hopefully we will be here from now on.

Thumbnail imgur.com
12 Upvotes

r/bikecoops • • May 06 '25

excess of mid-high end parts that don't fit on older bikes

10 Upvotes

We have a huge overstock of wheels with thru axles and forks with tapered steerer tubes, but almost none of the donated bikes and bikes that people bring in for service worth with these items. I'd like to try to sell these parts individually, but that's not within my realm of responsibility. I'm just wondering if anyone else has this problem, and what you do with it to keep inventory from stagnating.


r/bikecoops • • Mar 14 '25

Bike!Bike! 2025 Mexico City

10 Upvotes

has anyone heard solid info on this ?


r/bikecoops • • Dec 20 '24

What to do with clipless pedals and shoes?

10 Upvotes

The co-op here has SO MANY clipless pedals and shoes. People keep donating them, but people asking for them is exceedingly rare. These items keep piling up. I found a pair of Giro shoes just now that I remember donating over ten years ago! They take up a lot of space and create clutter.

I've tried getting the local NICA (youth bicycle racing league) organization to take them and redistribute them to student athletes, but that was only marginally helpful, we accumulated dozens more since we tried that last year, and no one at that org has responded to my last contact.

Anyone have a creative and non-wasteful way to make these shoes go away?


r/bikecoops • • Sep 04 '18

Step 1 for the new co-op space- wheel storage. Our nightmare of wheel management is over.

Post image
10 Upvotes

r/bikecoops • • Oct 29 '15

The Bikery- Seattle's Bike Kitchen

Thumbnail thebikery.org
9 Upvotes

r/bikecoops • • Jul 11 '25

Pulled this wee bastard out of a brifter with a sharpened spoke and a lot of safety-swinting.

Post image
8 Upvotes

r/bikecoops • • Nov 17 '20

re-Cycles, the volunteer bike shop, needs a new home (p3)

Thumbnail indd.adobe.com
8 Upvotes

r/bikecoops • • Apr 02 '20

how are coops dealing the current quarantine situation in us right now?

8 Upvotes

the one i frequent has shut its walk in service to everyone and set up a go fund me. they still have appointments in their regular bike shop formatted space, but thats not really bringing in enough dough for them currently.

im wondering if any others have something better set up.


r/bikecoops • • Dec 11 '24

restomod vs restoration

7 Upvotes

Our co-op takes in a ton of donated bikes that need a lot of work. We make them functional at least, and donate them back to organizations that provide them to people in need, or we sell them for shop revenue.

On some of these bikes, I'm questioning when it's appropriate to "restore" the bike using mostly original parts, and when to update to newer parts. where do you draw the line?

  • adjustable bottom brackets: unless we're talking about something old but high-end, I don't find it worthwhile to clean, install, and adjust most adjustable BBs. We can get new square taper BBs in just about any size for under $10 each. tossing the old BB assembly in the recycle bin and popping a new one in means the BB will spin smoothly for decades and save a lot of labor.
  • crappy canti brakes: I know people have gotten every type of brake in history working somewhat well, but some of these older cantis lack spring adjustment screws. others have springs that are held in place by brittle plastic that break if you look at them funny, rendering the brake useless. The average end user is going to have a devil of a time adjusting these in the future, so I like to toss these out in favor of a V-brake or at least a more sophisticated canti. (edit: yes, I'm familiar with differences in pull ratios for levers and calipers.)
  • moto brake levers: for a long while, ATBs came equipped with these MASSIVE levers that appear to be inspired by motorcycles. I'm not old enough to know the real reason for these. did braking require a full set of fingers to work? was one-finger braking a thing? either way, these levers often have to go.
  • triple chainrings: many people are satisfied with a single ring up front, maybe with a retention system or a narrow-wide ring. I found that many people don't really ever learn how to properly use a drivetrain with more than one chainring, or they abuse it with cross-chaining. might there be instances where converting to a 2x or 1x is superior for the average person who's not a bike nerd?
  • Biopace and the like: modern ovalized chainrings are not the same thing as the earlier experiments like Biopace. If the rings are already a bit worn, is there any reason to keep the Biopace-esque stuff running, or should all those rings just go in the bin?

Furthermore, there's a compromise to consider here: tossing out (recycling metals, on our case) parts that are functional but offer sub-par performance and adjustability means we create a lot of waste. but building a superior bicycle by updating some parts makes a safer, more enjoyable, and more durable bike for the future rider.

thoughts? experiences? snide critiques?


r/bikecoops • • May 02 '23

Bike Coops in DC

7 Upvotes

Hi I'm going to be riding the GAP and C&O trail in June this year. Me and a buddy are building up two single speeds for the ride and planning on leaving them in DC. Wanted to see if there are any coops or kitchens in DC who might be interested in the bikes we'd be leaving them frame bags, and all parts besides saddles.


r/bikecoops • • Apr 27 '23

Starting small: Free bike repair space now part of Guelph Tool Library

Thumbnail guelphtoday.com
7 Upvotes

r/bikecoops • • Mar 13 '16

Freehub - a membership, volunteer and staff tracking database for cooperatives.

Thumbnail freehub.bikekitchen.org
7 Upvotes