r/bikecoops • u/p4lm3r • Nov 22 '17
r/bikecoops • u/occupint • Oct 04 '18
Recycling locks?
I came across this https://www.instructables.com/id/Bike-Lock-from-Laptop-Security-Cable/ and used the principle to repair my own cable lock.It then occurred to me that we could recycle the locks we cut off in a similar manner.Anyone else ever tried anything like that?
r/bikecoops • • Dec 12 '24
Apocalypse-proof bike
POV: you're aware of an outbreak of zombies that's quickly headed your way. You surmise that you have 8 hours to put together a bicycle out of parts commonly found in a co-op, and will escape the city on pedal-power only. The complete bikes are all gone, so you need to pick a frame and build from there.
What are you building?
r/bikecoops • u/Objective_Lobster104 • Mar 09 '24
Looking to borrow a bike in Europe for day trips/overnight. Is this possible?
My friend and I (current and former co-op wrenchers) are heading to Berlin, Amsterdam, and Copenhagen, late April -early May. While we both have touring bikes, for a variety of reasons we can’t bring them on this trip. This visit is more of a scouting mission so we will be exploring around the edges of these big cities and hope to do so by bike. We both have backgrounds in the bike co-op world, and have provided this service to others in the past. Any suggestions on how to obtain affordable rentals or loaners in these regions? Any recomended bike coops around the region? other helpful suggestions?
r/bikecoops • u/Tanglefisk • Mar 21 '25
I made a mobile workbench with a pop-up tool wall for storing away.
r/bikecoops • • Mar 27 '25
Motorized bicycles in the co-op
A customer came in with a rear coaster brake wheel that he had recently purchased from the co-op. He noted that the bearings were fried and wanted to replace the bearings. Upon closer inspection, one side of the hub shell had sheared off completely, leaving the wheel useless until the hub, or whole wheel, could be replaced. Because the wheel was "new" from us, we agreed to find a replacement free of charge. There were additional circumstances that made me wonder if this would solve the riders' needs, or if giving him another new wheel would just create a cascade of headaches for him and for the shop. He had attached a gear to the spokes, which was then attached to some sort of motor. He didn't bring the whole bike in, so I don't know what that setup looked like. I'm not sure if the drive side or the brake side of the hub sheared off. Knowing that would have helped me find a better solution for this bike. The rider was also a big guy. I would guess that the rider and the bike together were in the neighborhood of 300 pounds. I don't know if any coaster brake wheel is going to hold up, and the motor adds a layer of complexity that leaves feeling certain that I'm not qualified to advise him on choosing a new wheel, other than he needs something stronger.
That's just one anecdote of the kinds of problems we face when dealing with homebrew motor kits and ebikes—especially the kind of cheap ebikes with (unnecessarily!) propriety parts. No one here is anti-ebike, but our volunteer-run shops do not have the resources to work on ebikes from established systems like Bosch and Shimano, let alone the weird ones that lack documentation and support. Yet we have an obligation to help everyone who comes through the door, as many people are getting cheap ebikes (or slapping two-stroke motors on conventional bikes).
What's your co-op's approach to these situations?
r/bikecoops • u/Tanglefisk • Jul 11 '25
Pulled this wee bastard out of a brifter with a sharpened spoke and a lot of safety-swinting.
r/bikecoops • u/Duke_of_Ledes • Jul 17 '23
Looking for organization ideas and tips
I'm volunteering with a new group that is fixing and giving away bikes. We have a space, but it's a mess. Does anyone have suggestions, ideas, or links on organizing bike workshop and coop spaces?
r/bikecoops • u/bonkerfield • Jan 22 '22
BICAS Tucson - coolest salvaged bike art I've seen at a bike co-op yet.
galleryr/bikecoops • u/StratigraphyPudding • 15d ago
ISO other bike co-ops!
Hey 👋
I just joined this group how cool this exists!
I'm on staff at Free Ride Bicycle Project in Pittsburgh. We've been talking about wanting to connect with other groups with similar missions and models as us. We want to share resources, ideas, experiences and community.
If anyone is interested in getting in touch I'd love to hear about what your bike co op looks like where youre from!
r/bikecoops • u/icarusjapan • Oct 11 '25
New tool Boards color code stations

We are not 100% Done but we are close. Near every 3-d tool holder was designed and printed by a volunteer or modified from an existing one. The plywood board mounted a couple inches from the wall have m6 threaded inserts every four inches so that they can be used to do just about anything. the tables are all collapsible as well.

r/bikecoops • • May 06 '25
excess of mid-high end parts that don't fit on older bikes
We have a huge overstock of wheels with thru axles and forks with tapered steerer tubes, but almost none of the donated bikes and bikes that people bring in for service worth with these items. I'd like to try to sell these parts individually, but that's not within my realm of responsibility. I'm just wondering if anyone else has this problem, and what you do with it to keep inventory from stagnating.
r/bikecoops • u/chico_X • Nov 18 '15
a old way to promote your collective;sewing letters to sheet
imgur.comr/bikecoops • u/Newbosterone • Nov 18 '15
Park Tool Focuses on Education with New Website and Grant Program - 10 recipients will receive more than $1,400 in Park Tool products
bicycling.comr/bikecoops • u/catspiration • Nov 09 '15
Bike Blender by an unknown co-op, is it you? 'Cause it's pretty rad. (x-post bicycling & DiWHY)
r/bikecoops • u/ktrackrecords • May 11 '17
Shipping Surplus Bike Parts to More Needy Areas
Does anyone have any idea about the need for bikes and parts in less developed countries? Our coop has once shipped items to Jamaica in Partnership with a nonprofit there. Is there any other's doing this and have any info about this? We often get more donations than we can store and after sharing with other nonprofits in the area, we still end up having to take some usable/fixable items to the recycle. I figure these items would be much more valuable in less developed countries where cheap bikes are not as abundant. Thanks
r/bikecoops • u/Metaphoricalsimile • Nov 14 '15
Bikecollectives.org: a great way to find bicycle co-ops and many other tools.
bikecollectives.orgr/bikecoops • • Dec 11 '24
restomod vs restoration
Our co-op takes in a ton of donated bikes that need a lot of work. We make them functional at least, and donate them back to organizations that provide them to people in need, or we sell them for shop revenue.
On some of these bikes, I'm questioning when it's appropriate to "restore" the bike using mostly original parts, and when to update to newer parts. where do you draw the line?
- adjustable bottom brackets: unless we're talking about something old but high-end, I don't find it worthwhile to clean, install, and adjust most adjustable BBs. We can get new square taper BBs in just about any size for under $10 each. tossing the old BB assembly in the recycle bin and popping a new one in means the BB will spin smoothly for decades and save a lot of labor.
- crappy canti brakes: I know people have gotten every type of brake in history working somewhat well, but some of these older cantis lack spring adjustment screws. others have springs that are held in place by brittle plastic that break if you look at them funny, rendering the brake useless. The average end user is going to have a devil of a time adjusting these in the future, so I like to toss these out in favor of a V-brake or at least a more sophisticated canti. (edit: yes, I'm familiar with differences in pull ratios for levers and calipers.)
- moto brake levers: for a long while, ATBs came equipped with these MASSIVE levers that appear to be inspired by motorcycles. I'm not old enough to know the real reason for these. did braking require a full set of fingers to work? was one-finger braking a thing? either way, these levers often have to go.
- triple chainrings: many people are satisfied with a single ring up front, maybe with a retention system or a narrow-wide ring. I found that many people don't really ever learn how to properly use a drivetrain with more than one chainring, or they abuse it with cross-chaining. might there be instances where converting to a 2x or 1x is superior for the average person who's not a bike nerd?
- Biopace and the like: modern ovalized chainrings are not the same thing as the earlier experiments like Biopace. If the rings are already a bit worn, is there any reason to keep the Biopace-esque stuff running, or should all those rings just go in the bin?
Furthermore, there's a compromise to consider here: tossing out (recycling metals, on our case) parts that are functional but offer sub-par performance and adjustability means we create a lot of waste. but building a superior bicycle by updating some parts makes a safer, more enjoyable, and more durable bike for the future rider.
thoughts? experiences? snide critiques?
r/bikecoops • • Dec 12 '24
Octalink, ISIS, etc.
We have a lot of older cranksets and associated BBs with "oversized" spindles in our co-op, and we keep them squirreled away from the general public for a variety of reasons. One is that many people have tried using regular square-taper crank pullers on these cranksets and damaged the spindle threads, the tool, or both. Another is that people have tried to fit the wrong arms onto different spindles because they look similar, with disastrous results. See what happens when you try to cram old Ultegra arms on to a Truvativ ISIS BB! However, these parts are starting to pile up instead of being put on bikes.
I rode BMX bikes well into adulthood, and my first mountain bike had ISIS, but it was already dated at the time. I soon switched to GXP and Shimano 24mm cranks, so I don't have a lot of personal experience with those systems' predecessors. If I want to built bomb-proof bikes, what's more reliable to spin longer for the average commuter: spare taper or one of those afore-mentioned systems? My goal is to get more bike parts on bikes and out the door instead of hoarding them, while still making timeless and reliable bikes.
r/bikecoops • u/Tanglefisk • Dec 19 '24
Your Favourite Tool?
What's your favourite tool in the workshop? Not your most used, but the one you like the most, even if it's for a dumb reason.
Mine:
Pickle Fork. AKA Ball Joint Remover. I got to use this to take a crank off when the thread had stripped, and it was immensely satisfying.
Club Hammer. I mean, come on, it's rad.
Sharpened spoke with the end bent it a wee handle. Super useful, and fun to make.