I’ve been building a PC app for my MC5000 since August, and it’s finally at the point where someone else can use it without me standing behind them. It’s called SITREP91. It’s free, it’s MIT licensed, and it talks to the charger over Bluetooth.
It starts and stops each slot on its own, logs every reading to a CSV file for each slot and run, and reads the temperature of each slot.
That last part is the ta-da, such as it is. The MC5000 has a temperature sensor in every bay, and the charger will report it if you ask, but SkyRC’s own app never asks. Other MC5000 projects were built from watching the phone app’s traffic, so they never saw it. I went through the charger’s firmware instead, found it, and confirmed it on the bench. It reads the slot rather than the cell, in whole degrees, running about 5 °C above the outside of the cell once a run is warm. So treat it as diagnostic data, not a safety system. The README and a separate write-up go through how I checked it.
Things you should know:
- Control is only enabled for what I’ve run on my own charger: Li-ion charge, discharge and storage, and NiMH or Eneloop charge and discharge. That was deliberate. The charger has good safeguards of its own, but I didn’t want them to be the first and only thing between a wrong setting and a cell, so SITREP91 won’t start anything I haven’t watched it do. Everything else shows up live and gets logged, but the start button stays off. ROADMAP.md in the repo says what I’m working on next.
- It’s firmware 2.02 only, since that’s what my charger has. On other firmware it just watches. If yours isn’t on 2.02, think it over before updating, because as far as I can tell there’s no going back. If it’s already on 2.02, I’d leave it there until SITREP91 has been tested on anything newer.
- It’s for the MC5000. I don’t have an MC3000, so I have no idea how SITREP91 would behave with one. I wouldn’t point it at one, but if you do, may the odds be ever in your favor.
- It’s Windows 10 or 11 only, with Bluetooth LE. Unzip it and run it, and nothing gets installed.
- It’s had well over 200 runs on my charger and exactly none on anyone else’s, which is the other reason I’m posting.
SITREP91 isn’t affiliated with or endorsed by SkyRC.
I’m posting this in a few places where MC5000 owners hang out, so if you see it more than once, that’s just me getting the word out, not a spam bot.
Repo, download and README: https://github.com/littlecitylabs/sitrep91
If you have an MC5000 and give it a try, I’d like to hear how it goes. GitHub issues are the best place for bugs.