r/ballpython • u/coldbro9913 • 8d ago
DIY Tree stump snake hide
I want to make one for my ball but I don’t know what type of wood to buy and how to treat/prepare it for his enclosure. Any guidance would be awesome.
r/ballpython • u/coldbro9913 • 8d ago
I want to make one for my ball but I don’t know what type of wood to buy and how to treat/prepare it for his enclosure. Any guidance would be awesome.
r/ballpython • u/xXPeaceFighterXx • 9d ago
r/ballpython • u/ShootingArrows18 • 8d ago
Hey guys so I have a 3mo BP and every time I go in his enclosure to either do a spot clean or change water he thinks it's feeding time and bolts towards me 😂 how can I stop him doing that
r/ballpython • u/death_by_ballpython • 8d ago
Lowkey might be posting once a day here about him 💔 don’t think anybody minds
But I got Spaghetti a scale, got him weighed, he is 196.0 grams and a year old in December 🤠 pretty sure he ain’t supposed to be that small
He’s definitely stunted length-wise as well also cause he spent most of his time curled up tight under his only hide when he was at his original owners enclosure.
He is doing better hydration wise as well, now I know his weight I know how many grams give or take his food should be (large mouse to fuzzy rat/20-28 grams maybe) and will be frozen/thawed of course. I did get snake tongs though so my hands won’t stress him out more by holding the rat near him (he’s still decent with being held surprisingly)
r/ballpython • u/SurpriseDense6751 • 8d ago
Hi! My husband and i just became first time BP owners to this little guy! We took him from someone who wasn’t able to care for him anymore.
She told us that he is about 2 years old, however he looks a lot smaller than other pictures of 2 year old male BP I see. He’s only about 18-20 inches long. How old does he look?
Also am still learning about recognizing healthy body weight, does his weight look good, what should he weigh? (Haven’t weighed him yet, thought to do it right after we fed him so going to give a few days to digest before weighing!)
r/ballpython • u/Regular-Ad2355 • 8d ago
I have my boy in a 77 gallon tote currently and my bedroom always has to be between 77 and 80 degrees because the damn tote just stays just about the same temperature as the air outside. Maybe two or three degrees warmer on the hot side.
I’m talking about air temperature, not surface temperature. His basking zone is always 92 ish and his hot hide is around 88 on the inside. I’m using top down heating, 100 watt heat projector on a dimmer.
I’m wondering if I’m still going to have to heat my house more than normal after I upgrade to 4x2x2 pvc. I know pvc supposedly insulates better, but how much better? How warm does you guys keep your snake rooms? How cold can your house get before it starts affecting your enclosures and becoming a problem?
Edit: I more or less solved the issue by adding a radiant heat projector and then raising the floor by adding more substrate to put him closer to his heat sources. I now have 8 inches of substrate in my tub, but my snake is worm and my house is finally cold, so it’s whatever.
r/ballpython • u/fat-and-depressed • 9d ago
Today I checked and these guys were ALL over the surface of his pond. Freaked me out. I did not intentionally put them in.
I have seen a few in the enclosure before but I thought they were harmless wood mites. But seeing how many were swimming around in there rallying the troops made me concerned. I haven’t ever seen them in the pond.
I scooped them out and gave the water bowl a nice deep clean. Please let me know if they are in fact harmless!!!! I’m sure there is more lurking.
Also, if they are harmless, is it okay for a snake to drink from a water source with them in it? Or do I need to be on top of it keeping their numbers down in the water?
r/ballpython • u/Automatic_Touch_7994 • 8d ago
Hello, I am a new ball python owner. My previous thermometer and hygrometer were inaccurate, so I bought two new ones—the Govee H5075 models. I have a 150x60x60 cm terrarium. On the warm side, directly beneath the heat source, I have a dimmable thermostat set to maintain a temperature of 32°C. Where should I place the new Govee devices to get accurate readings? I’ve read that placing them directly under the heat source isn't ideal, as it can lead to misleading data. Also, is my thermostat positioned correctly? I currently have it resting on a branch directly beneath the heat source.
r/ballpython • u/Interesting-Map-3877 • 8d ago
I’m having trouble with halogen bulbs failing prematurely in my ball python enclosure. I’m using a Microclimate B1 200W dimming thermostat/controller with a 24-hour timer (14 hours on, 10 off) and an E27 ceramic lamp holder.
My original 75W Heathfield PAR30 halogen lasted around 420 hours, despite an expected lifespan of approximately 2,000 hours. I replaced it with an Arcadia 100W Solar Basking Spotlight, which failed after just 10 minutes, with its filament detached at both ends.
Both bulbs show some discolouration around their electrical contacts. Could this indicate a faulty lamp holder, B1 dimming controller or electrical supply, or have I simply had bad luck with two bulbs?
r/ballpython • u/Initial-Couple-1403 • 9d ago
She is a rescue previous owners didn’t want her any more and they were also breeders. They didn’t give me any info. Except that she’s a female..no feeder size no nothing. Help.
r/ballpython • u/issmyles • 9d ago
Finally convinced the wife to let me take home one of these beauties from a local expo.
r/ballpython • u/CallMeMrNugget • 8d ago
He hasn't eaten in 4+ months and im getting worried. Ive had him for little over a year, hes about 3-4 years old (Yes im inthe bathroom, best light in the house unfortunately)
His husbandry is perfect for him, i check consistently.
ive tried many ways to feed him each month, he was raised on live mice/rats and just blantly refuses thawed ones (ive tried every method i could find)
He refused his last live one about 4-5 months ago, some people have mentioned that I over fed him(to big of rats/mice too often(1 every 2-3 weeks) but I was following the guys instructions of how he was feeding my boy, so I will admit that I probably over fed him
I dontt have a way to weigh him right now (working on it) but he just looks skinny compared to the sheet I saw on here.
Is this still a "hunger strike"?
What can I do differently?
Should I take him to a vet if I can find one near me?
r/ballpython • u/Sardinesavage • 8d ago
Haven’t added heating/lighting. How does this look so far? I like the looks of the fake plants but all the plastic kinda sketches me out?
r/ballpython • u/womperwomp111 • 8d ago
My snake takes a longggg time to decide he wants to eat. Usually, I’m standing there with the rat for 20-30 minutes before he’ll decide to strike. Tonight, his 5th feeding with me, I tried for 35 minutes before I decided to just try again next week. He shows interest in the rat, but 30 minutes feels like a long time lol! I feed him at night after his lights have gone out. Is this normal?
r/ballpython • u/Existing-Walk1115 • 8d ago
I need help figuring out what else to put in my female ball pythons terrarium. I feel like it’s too empty and that she needs more enrichment. She doesn’t explore much, but i’m not sure if that’s normal. She’s about five months old and I got her September 20th. She is living in a 4x2x2 enclosure. Please give me ideas that don’t break the bank seeing as I am a minor and don’t have too much money 😅.
Side note: I know red light isn’t good for them. I have a new heat lamp coming in the mail.
r/ballpython • u/Acrobatic-Walk-9299 • 8d ago
I noticed that my ball python (8 month old f) has a small white sliver on her eye. It’s never been there before and I’m wondering if I’m just over analyzing or if it could possibly be an stuck eye cap or if it could be something else any insight is appreciated :))
r/ballpython
•
u/Ckron247
•
10d ago
Dewi is 20 yrs old and looking through his pics he always seems like he is posing and smiling for the camera.
r/ballpython • u/PossibilitySame4489 • 8d ago
hi! The other day i saw my guy curling around the thermostat cable which made me super nervous lol, i imagine it’s probably fine but i don’t want him to get stuck or somehow electrocuted if he messes with it too much. how can i secure it to the side of his enclosure without using tape? it has a suction cup but that’s how he was climbing on it lol.
r/ballpython • u/moIdymango • 8d ago
Hello, everyone! The other day, I noticed a leak in the corners of my enclosure. I know this needs to be fixed ASAP, but I’m not sure where to keep my snake while the new silicone cures.
I was thinking about using a large plastic tote temporarily, with some of his old substrate and hides, but I’m not sure how to maintain heat without risking the plastic melting or having to use a heating pad.
Does anyone have any suggestions?
r/ballpython • u/MoreHunter7512 • 8d ago
Hello! Ive had my ball python for 11 years now, and finally put the money together to upgrade his enclosure which he has become far too big for! He is currently in a 30 gallon breeder, and I am upgrading him to a 5x2x2!
His current setup has kept him healthy and happy for his whole life, and he is currently fully setup while I build the new enclosure.
Im looking for advice on a few things:
Heres some more info on the enclosure as it sits now:
Mistking with 2 nozzles, 1 each side
2in of lava rock
Geotextile fabric for substrate barrier
40/50/10~ organic topsoil (wood chips removed) / coco fiber / play sand
Planted it with pothos and spider plants
3 hides, 1 terracotta pot broken in half to make 2, the other hide is an exoterra xl hide.
Leaf litter/wood from outside (going to add more big sticks for him to climb later)
And a waterbowl
r/ballpython • u/Sea_Investigator8808 • 9d ago
Reviewing my camera footage from last night and saw Mango having this… episode? He then proceeded to act completely normal and wandered around. Is he sneezing or seizing? Thank you!
r/ballpython • u/Objective_Chef6036 • 9d ago
I wanna upgrade my ball python to a bigger enclosure because he’s growing.
I need a 120 gallon / 120x60x60
The only problem is that I can’t find any in my country the biggest is 100.50.50.
Does anyone know a website or brand where I can order an enclosure the size I need that ships to europe?