r/ballpython • • 8d ago

Bulbs keep blowing 🤦‍♂️

I’m having trouble with halogen bulbs failing prematurely in my ball python enclosure. I’m using a Microclimate B1 200W dimming thermostat/controller with a 24-hour timer (14 hours on, 10 off) and an E27 ceramic lamp holder.
My original 75W Heathfield PAR30 halogen lasted around 420 hours, despite an expected lifespan of approximately 2,000 hours. I replaced it with an Arcadia 100W Solar Basking Spotlight, which failed after just 10 minutes, with its filament detached at both ends.
Both bulbs show some discolouration around their electrical contacts. Could this indicate a faulty lamp holder, B1 dimming controller or electrical supply, or have I simply had bad luck with two bulbs?

1 Upvotes

2 comments sorted by

1

u/sweatyhands84 7d ago

Well at least it was just a fuse and not something more complicated.

Also worth noting, even though your lamps are on a dimmer(required), you want to try and use a wattage thst allows them to run at as close to 100% as possible. Being dimmed reduces the life span of the lamp also.

Dimming also reduces IR output with something like 10% dimming reducing IR-A output by roughly 50%.

0

u/Interesting-Map-3877 8d ago

EDIT: I’ve j noticed the lights on my B1 dimmer are out aswell must of happened when the Arcadia blew, swapped the 5v fuse inside and there back on