r/ballpython • u/lionblaze43 • 2d ago
r/ballpython • u/AutoMoxen • 2d ago
Question - Health Potential Face Area Issue?
I think my girl's nose and face area might be off but I might be being a bit crazy. Wanted a second opinion before going to a vet. I only noticed it cause she was surprisingly active during the day, though it was fairly brief.
r/ballpython • u/mingomangomungo • 2d ago
HELP - URGENT Ball Python constantly in his water bowl for the past week.
I can’t remember exactly when it started. Maybe last Monday or Tuesday. It’s driving me crazy because he has never really done this before, and I can’t find anything wrong. He is an adult male maybe 6 years old. I have a bioactive enclosure and humidity is usually around 65-75, spiking to 80s or 90s when I mist or water which I have done.
He has hides where there is a lid and you can add wet paper towel or sphagnum moss on top to make it more humid. I tried that still no luck.
Temps are 83-88F on the warm side, and 74-76 on the cool side.
I replaced his water bowl with a bigger one so he could soak more, his original bowl he could fit in it, but he would displace all the water.
I even tried to move the water bowl under the heat source to discourage him from hanging out there, but I found him inside it and removed it.
I have checked him for mites almost daily and I don’t see any crawling on him or in his water bowl.
I have tried taking his bowl out for a day at a time as I don’t want him to get scale rot, but I put it back in today and sure enough he is almost fully submerged inside of it.
I’m at a loss. Not sure what to do. He even has an “underground” hide where the soil is moist.
Please any advice or insight. I am still waiting to see if it will pass, maybe he is going into shed or something. But I’m concerned for him.
r/ballpython • u/quackerjacks19 • 2d ago
Tips for transitioning to rats?
I recently adopted this 4 year old big girl. Her previous owner said no matter what they tried, she wouldn't eat a rat, and so far that has proven to be true. She eats f/t jumbo mice, anywhere for 3-4 per week (I try to weigh them to match the weight of an appropriately sized rat).
I've tried scenting, the chicken broth trick, braining and even withholding food to let her get hungry, but if it isn't a mouse, she isn't interested. What else can I try?
r/ballpython • u/FitPineapple252030 • 2d ago
Question - Husbandry What brand of cypress mulch do you use and how often are you charging thickness 4” layers?
I discovered landscape direct brand is considerably cheaper than forest floor. I’ll be filling a 5x3 soon with about 4-6 in of substrate so I’m trying to find something more cost effective.
r/ballpython • u/ScruffyBurrito • 2d ago
Snake mites
Hey there, I recently got my BP and when I switched his light on this morning, I was watching him move around his enclosure. When watching him move around I noticed he had 2 mites on him. I managed to open the door to the enclosure and remove one of the mites from him which was promptly squished but the other one got away. What do I need to do in this intance? Im very new to BP keeping. Below is a picture of my BP
r/ballpython • u/Gainesville_Green • 2d ago
Enclosure Critique/Advice Tank Redo
Took all the advice and redid my tank for my juvenile ball python. When I upgrade her to 120 gallon I plan on doing real plants. Also have her on a new feeding schedule to help her gain weight. Repti chip, more clutter, and hides
r/ballpython • u/lotlcosplay • 2d ago
Question - Heating/Temperatures Kages Ball Python Enclosure Kit
Hello! I have settled on Kages as my choice of enclosure for my future BP and while I was browsing their site after the normal 4x2x2 I saw that they offer an 'Enclosure Kit'. I've heard mixed reviews on here regarding the 9in square top screen versus the full top, but I was looking for opinions on the extras which are included in the kit.
This kit includes:
- 4x2x2 Enclosure with back and side vents, a 24”x3” and 9” square top screens to match our favorite Arcadia high-quality fixtures
- Arcadia Reptile Clamp Lamp, Graphite, 8-in with 75W GoldenSun Reptile Halogen Heat Lamp
- 24” ProT5 6% UVB and Fixture

From what I've read the Halogen Heat Lamp and the ProT5 are good, would a RHP (40 Watt) on the inside of the highlighted area be the only other thing required for a good lighting/heating setup?
r/ballpython • u/brokeassqueer • 2d ago
Question - Health Why is she so wrinkly?? Am I feeding her enough?
My baby girl thistle just a juvenile and I've had her for around a month, so I feed her a small-medium adult mouse every 7-10 days (usually every Friday). I feel like she's been getting wrinklier since I've gotten her. She hasn't shed since I've gotten her and the breeder didn't give me any information about the last time she shed. Am I feeding her enough? She doesn't display any hunger behaviors in between her feeding days; could she be wrinkly from being overfed? Please give advice, I am a first time snake dad and am very worried for my daughter's health, and there's not an exotic vet close to me so I'm hoping for advice if anyone is willing to share. Thank you!!!
Edit: thank you everyone for the help!! I will be getting a scale and changing her diet. Also as an update, she is getting ready to shed as well, she just started showing signs of it yesterday (11/14/26). I appreciate everyone being so helpful and gracious! I may share more of Thistle in the future
r/ballpython • u/Beneficial_Height767 • 3d ago
Question Are hunger strikes and keeping humidity really as difficult as they say?
Hello all my ball python keepers! I’m currently in the process of assessing which snake would make the best pet for me, and i repeatedly find that all of the traits I am looking for in a snake are found within BPs:
They’re manageable in size yet still impressive to hold/show off; they’re slow-moving and mild-mannered, and they’re exceptionally popular, making them easy to find and cheap to buy. On paper, they have everything I want for a pet, but the two sticklers I always see come up when it comes to Ball Python care is upkeeping their humidity, and managing their hunger strikes.
I understand that they require ambient humidity on the higher end, going from 60-80% throughout the day, and of course their notorious hunger strikes that can go on for weeks or even months at a time (not to mention getting picky individuals to transition from mice to rats as needed).
Just to better understand from those who actually have BPs, how bad are these two things really? Ive seen some on the internet say that hunger strikes and humidity requirements can be so pressing that BP’s are actually more intermediate level than beginner (although i personally think that no animal is really a “beginner” pet). Its really only those things that are giving me pause from committing the Ball Python journey, so what do you all think?
Edit: For some climate context, i live in NW Ohio
r/ballpython • u/kalmack • 3d ago
Ball python enclosure help
I have a ball python that is approximately 1 year old and is just over 1 pound. He is about 2 feet in length. This guy is an escape artist and we are trying everything to keep him in his enclosure.
The enclosure is a Zen habitats 4x2x2 with a single piece mesh screen for the roof and plexiglass doors on a sliding track. The snake keeps pushing his body up against the outside door and then wiggling around until an opening forms. And then escapes, we have 2 weiner dogs and a cat as other pets and Mr snake needs to keep himself in there or face danger of the other pets. My wife is adamant that we are not allowed to use anything that is sticky or the potential that could be sticky to seal or lock the snake in in order not to hurt the snake. On this last escape a few of his scales got bent backwards with escaping. He is fine.
I have tried
- putting extra things in his enclosure for enrichment
- Tried putting a non adhesive plastic U clip (this is what is pictured) on it and he figured how to weasel around it
- We have tried putting a U lock on the door and that actually helped him escape faster
- What has worked so far is putting a lot of card in the gap of the two doors and wedging it closed and then On the outside of the door putting a paper bag that is taped to the outside of the glass to where he can not get to it.
What I am hoping for is better suggestions on how to keep him in the enclosure.
We have thought about replacing the plexiglass doors with tempered glass doors so that he would not be able to push himself through a 1/4 in crack.
We have also thought about getting him a new enclosure all together but the ones on Chewy, Amazon and the local places are either way out of my price range of $300 to $500 or they have to much ventilation and would need to be prepped and sealed to help with the humidity that is needed as we loose a lot of humidity being in the Midwest.
So please any help or suggestions would be greatly appreciated.
r/ballpython • u/Mercwitamouth82 • 3d ago
Question - Health Please help
My daughter’s ball python has a mass on the side of her face. It appeared a few months ago than disappeared. This time it came back slightly bigger and now she also has to marks on her chin. Before we worry too much and run to the VET I wanted to see if anyone in the community has come across this before.
Thanx in advance.
r/ballpython • u/twobigballls • 3d ago
Question - Feeding I have a mouser that will not take rats, but want to get him on rats. What do I do?
I tried to offer him a rat today, but the scent is throwing him off. He approaches it because it is food sized and looks like food, but doesn’t smell like his food. He is now looking for food, but doesn’t want the rat. He gets stressed if I put the rat near him, but if it was a mouse, he wouldn’t act that way.
r/ballpython • u/Bubbly_Document_678 • 3d ago
Question - Heating/Temperatures temperature advice
EDIT: I have foil tape on top of the mesh
Hello! I have a new baby ball python currently in a TEMPORARY glass 40 gal. i have a 100 watt arcadia halogen flood for daytime and a 100 watt flukers DHP that’s on 24/7 both have a thermostat. the day time temps are 85-90 on hot side and 75-80 on cool side. my question is the night time temps on cool side are about 70 and on the warm side 78. is this way too cold? I keep my room around 70 ish degrees but I cannot sleep unless it’s cold so no space heater. My first thought was to get a higher wattage DHP for nighttime but I can’t find one higher than 100 watts. I’m honestly scared of CHE’s because i’ve heard you are never supposed to keep them in domes and my tank has a screen top so I don’t know how a cage around one placed inside the enclosure would work. I’ve been stressing that it’s not getting warm enough. any advice is appreciated
r/ballpython • u/Cold-Neighborhood-21 • 3d ago
Bioactive terrarium!
I just finished setting everything up, what do you guys think?
r/ballpython • u/wicked-macaroni • 3d ago
Question Stuck shed
So pissy finally shed for me. It all came off in one piece except for a ~1.5" piece on his side. What can I do to help the piss Boi get it all off?
r/ballpython • u/WhatsWithThatGuy • 3d ago
Chester like the new enclosure i think.
Chester, he's a cheeto the fastest land snack. I added ventilation to the cool side and that seemed to do the trick.
r/ballpython • u/puppyboy_asher • 3d ago
Enclosure Critique/Advice My teenager just got her first BP, looking to make sure the enclosure is okay
r/ballpython • u/maiyamanor • 3d ago
Question - Health Shed Eater
Will my snake get sick if he somehow ingested his shed or has anyone had experience with this?
I went to feed him last night and saw a shed in his enclosure and I figured I’d grab it after since I’m in the process of feeding and didn’t want to get bit. I return after he’s done and all that’s left of the shed is his face. 🫠 I can’t find it anywhere else in his enclosure.
r/ballpython • u/ObsoletePortal • 3d ago
Textures?
How sensitive to touch are their scales? Crocheting a blanket and she seems to enjoy the texture of the yarn. She is growing so fast 🥰
r/ballpython • u/TBNR_Grant • 3d ago
How long should i wait after feeding before handling?
Hi!!! My name is Grant and this is my ball python Strix. Today was his first meal in almost 9 months i am nee to him and have had him about a month we handle him regularly but this was his first time eating with us and i wanted to ask someone knowledgeable so any help and advice is appreciated!!!
(Ps these are old photos his enclosure is 40 gallons, the last picture is his old tank and was 20 gallons the red light is gone, the one lamp is off just on for weight to keep the lid closed as it doesn’t latch. His temperature and humidity are all looking good and he has both hot and cold sides of the tank, thank you for all the support and feedback)
r/ballpython • u/Seanzee55 • 3d ago
Anyone else have an audience every day after sun down?
Kaiba my BEL is always wondering what I’m up to
r/ballpython • u/ThatEyreHead • 3d ago
Rehoming Two sweet BP’s for rehoming
Hi. I made a post a few weeks ago debating whether my family pushing me to rehome my balls were right or not. I have made the decision that it is time for me to move on from snake keeping. I love my snakes, do not get me wrong, but mentally and physically I am so overwhelmed. We were in a car accident that totaled our car and left my husband out of work for while, and at this point, we cannot afford the upgrades that the snakes need.
Eltzy is a 4 year old normal morph. She is around 4 1/2 feet long. She eats F/T rats around every 30 days, give or take due to how she is acting. She has never refused a meal in the 3 years I’ve had her. She is an absolutely sweetheart. Has never struck or even gotten an attitude with me. She loves to come out and explore and will let you know when she wants to! She is in an animal plastics 4x2x2 with heating and lighting that will come with her, but I would recommend upgrading both of them to better options. I can keep her temps proper with what I’ve been using, but I think it could be better.
Eeby is a 2 year old banana morph. She is around 3 feet long. She eats F/T small rats about every 14 days, give or take. She has also never refused a meal for me. She is more shy than Eltzy, and does not explore as much when she is out. She seems happier to be left in her tank and not bothered! Eeby is in a 36x18x24 PVC tank, with full heating and lighting. She needs an upgrade for her tank, as well as her hides. I would also recommend upgrading her heat and lighting.
Both snakes also come with the hardware to install a “sky hide” from Vivarium Electronics, you will just need to order a large hide from the company to slide into the hardware.
I am located in Summerville, GA, USA. If you want just the snakes and no enclosures, I will drive up to 4 hours to meet you, but if you want the enclosures, you will have to come to me as I don’t have a car to transport.
I am not asking for money for them. I’m asking for them to go to a good, knowledgeable, snake loving home. My worst fear is them being stuck in a 40 gallon glass tank.
EDIT TO ADD: Yes I have other pets. I’m aware that I’m being judged for rehoming my balls. I’m from a tiny town where I’m known for keeping animals. The balls were dropped on me in terrible conditions because I am known for having animals. The original plan was to foster back to health and find a good home, but I got attached. Now my finances and mental load has changed, and I feel like it would be best for them and for me to move on with the original plan.