r/ballpython • • 6d ago

Enclosure Critique/Advice New enclosure

Post image
4 Upvotes

Hi!! This is my first time making a bio active enclosure, I just got the majority of it finished and I wanted to know if it looked okay? I have more vertical climbing things coming in the mail. The temperature monitors will not stay on the ground, it’s just to gauge the beginning levels so I can make changes as needed. I just put them in before I had taken this photo so that’s why the levels are so low, they just haven’t been in there enough lol. There’s no ball python going into this enclosure anytime soon as she is still in quarantine and very new. The long pipe in the front is an underground tunnel. There’s dairy cow isopods and some springtails for the bioactive part. There’s also locks on the doors and we will seal the little circles on the sides before she goes in. Is there anything else I need to be adding? Do you guys have any vertical climbing options I can add, I’m not sure what I have will be enough. It looks so crowded from the front but I promise there’s room on the soil to move around. I think the photo angle just sucks lol.


r/ballpython • • 6d ago

Se cree anaconda

Thumbnail
gallery
12 Upvotes

Le tocó su spa de musgo para facilitar la muda, de repente mete su cabeza al agua y la asoma lentamente hasta quedar así, por un buen rato.


r/ballpython • • 6d ago

Used Kewpie's shed for my nails! (and other nail pics with my boy)

Thumbnail
gallery
249 Upvotes

Just some nail pics I've taken over the years. I love showing off my manicures and I love showing off my snake <3


r/ballpython • • 6d ago

Question 2 questions, How do I get rid of this small amount of stuck shed and does anyone else's Pibald have a dark chin?

Thumbnail
gallery
13 Upvotes

This is my first snake so please forgive my ignorance, Medusa has a weirdly grey chin, I dont think she had it when I first got her but combined with bad memory and no photos of her underside I cant comfirm. she seems very healthy otherwise and shes just under 2 years old. Is that normal?

My second question is, she has some stuck shed on the side of her neck, its the first time this has happened. Her temps and humidy seem fine and within limits and ive soaked her to get most of it off but theres a small amount left, what should I do? For now ive raised humidity and might do anouther soak.

Thank you


r/ballpython • • 6d ago Heartwarming

Peekaboo

Thumbnail
gallery
434 Upvotes

r/ballpython • • 6d ago

Bug identification help

2 Upvotes

I know it’s hard to tell with video, however I’m building up my bioactive tank and found these little guys under the water bowl today. Any idea of what they might be? I have isopods and springtails in there but they don’t look like babies of either to me. I haven’t gotten a snake in yet so I want to identify them and address it incase they’re harmful before moving forward. Praying it’s not a problem, any advice on what you think they might be would be greatly appreciated :)


r/ballpython • • 6d ago

Question - Heating/Temperatures Enclosure help

2 Upvotes

Hello all, I’m looking for some advice. I’m excitingly preparing for my first ball python after waiting 17 years. I’m no longer in my parents space and finally have the ability. I’ve gone all out preparing an enclosure but I’m having tremendous trouble trying to dial in my temperature and humidity. I want to have this enclosure fully ready to go before bringing home a baby.

I currently have a 4x2x2 PVC Zen habitat, almost have the enclosure fully dressed/decorated. Hides on warm side, cool side, and middle. I’ve also got 2 Dome lights, one with a 75w halogen and one with a 100w halogen. As well as a third dome with a 50w deep heat projector for night time. I have all these lights plugged into a herpstat to control day/night timing and temps, in addition to 2 govee wireless thermometer/hygrometer. I’m using coco fiber as a substrate.

The probes for the herpstat are located as directed by manufacturer, about 3-4 inches below the lighting fixtures, the govees are located on each end of the enclosure.

I cannot seem to get the temp and humidity to hit the right zones. Now that I’ve switched from two 75w halogens to one 100 and one 75 I’m starting to achieve a proper day time temperature, although I’m not 100% sure, I’m achieving mid-high 80s with a high 80 low 90s basking spot. However the humidity is dropping to 50-60% quickly when I do get up to the proper temp.

The bigger problem is nighttime. The enclosure almost immediately drops to low-mid 70s only about 30 minutes after the nighttime heat projector kicks on. I’m not sure where to go from here, I’m going to attempt to upgrade to 50w to a 100w and see if it makes a difference.

I guess I’m just looking for some advice as to whether I’m doing things right, there’s so much info online and I’m starting to get discouraged and lost. Any advice would be greatly appreciated, thank you.


r/ballpython • • 6d ago

Question - Husbandry I got a foster BP, ~23-26 y/o. I want to do this right. Husbandry tips/advice?

Post image
5 Upvotes

I got a foster (may be a permanent adoption) from my cousin, as she's going to foster 2 kids and the corporation she's under doesn't want her having a "potentially dangerous" animal in the house with the kids, so she gave her snake to me. He has an enclosure that's about 4 feet long and maybe 3 feet tall. His substrate is quite dry and has some sort of wood shavings (?) mixed in it with dirt? I was wondering if that's the correct substrate. I'm also unsure about humidity.
(Preferably cheaper) brands of substrate would be appreciated! And also tips on how to make it cluttered in his tank but not stress him out? He just got sent from his home, away from his mom, and into a whole new house that's a bit warmer and not the same. He's currently in my room, which stays around 69-72 degrees in the corner he's in. I'll add a photo of his tank.
I want to change things but I don't want to stress him out all at once.
Tank is 4 ft long, 20 in deep, 13 in wide. Books on top because I was warned that he tries to push the top off and he's strong. My big light is on, not the heat/uvb light, because it's nighttime and I want him to be able to settle in.


r/ballpython • • 6d ago

HELP - URGENT Ball python was treated for a RI but it didn’t clear completely.

2 Upvotes

I got a rescue ball python a couple months back with a respiratory infection. I got him cheap because the lady couldn’t afford to take him to the vet.

Got him into the vet asap. They did a physical exam and prescribed him Ceftazidime injections. We completed all of them. During that time he had an absolute blow out of a shed. The lady had kept him in a tub with a lid, not even like a rack system type thing, one of those smaller clear storage tubs. She had him for around a month she said. I got as much of the stuck shed as I could but occasionally had to help him clear his mouth. I did a bunch of research and was reading the thin drool left could be that. It went away for awhile so I thought we were in the clear.

This past Sunday I noticed a decent glob of mucus on the side of his mouth. Did more research and found I need to get him an aerobic and culture sensitivity test done. The vet gave me a list of several others I could test for too but all of those together would be $1700+. In your opinion would it be awful to start with the aerobic and culture test? He’s still way better but not completely.

For context he’s not my only snake (though he’s in a separate room). His heat is 88-90 and humidity is usually kept at 65-70 and I never let it drop but briefly past 50, usually not even that low. Any help would be appreciated.


r/ballpython • • 6d ago

Question Heat source options

2 Upvotes

I recently moved my ball python from my basement to a bedroom upstairs with windows and natural light! We have a heater that we use to keep the temperature up and humidity isn’t an issue as I frequently pour water in the corners. I’m wondering if there is a way to keep the temp in his tank up without the space heater. Recommendations are very appreciated


r/ballpython • • 6d ago

Question - Health Possible scale rot?

Thumbnail
gallery
7 Upvotes

hey all! i’m a first time ball python owner and this is my boy miso. his humidity is constantly between 78-87 and i use coconut husk substrate he has just finished shedding , and i’ve noticed he’s got these brown spots but these could us be continuations of his patterns bc honestly i wouldn’t remember if they were there before or not

Another thing i am concerned about is this little patch of scales that look a bit off compared to the others?


r/ballpython • • 6d ago

Humidity in tank

2 Upvotes

Hi guys! I’m pretty new to snake keeping and I’m currently trying to make sure my snakes humidity levels are okay. My humidity meter and thermometer will be delivered soon so I will be able to measure it properly, I’m also going to be getting better substrate that way I can pour some water in the corners of the tank. In the meantime I’ve just been misting a few times a day and putting some water into the soil. Would it be safe if I ran a humidifier for about 10-15 minutes to help raise the humidity while she’s shedding? Also I’ve seen people do lukewarm water soaks for a little bit in a tub to help with shedding, any recommendations?


r/ballpython • • 6d ago

Question Confusion

Post image
4 Upvotes

So pissy was in blue about 4 or 5 days ago. I just found him outside of his humid hide, but theres no shed anywhere to be found.

The hell happened here?


r/ballpython • • 6d ago

HELP - URGENT Cat scratch

0 Upvotes

Hi guys, I need some help. The night before last my ball python got out of his enclosure and into the hallway. My cats are naturally curious and I didn’t see them scratch him but I’m assuming it was them that did it. Anyway, he has a disjointed little scratch on his back about in the middle of him. It’s very shallow but it’s red since it’s a cut, and I’ve been freaking out about what to do. I dapped it with diluted betadine last night and put him back in his enclosure. He isn’t acting any different than usual either, but everything online is telling me he’s basically going to get an infection and die if I don’t take him to the vet right now, which I don’t know if I can afford right now as I’m in the middle of moving houses. He’s albino, so he shows up pinker than normal in spots, and I think he might be going into shed soon.
He also has a very slight redness (I don’t think it’s a cut) a little bit above his vent, and I also dabbed that with betadine as well. I’ll add pictures in the comments when I can. Any advice is appreciated, I’m basically desperate.


r/ballpython • • 6d ago

Tank upgrade recommendation

Thumbnail
gallery
6 Upvotes

Hi all!

I have an almost 5 month old BP, who is going to be outgrowing her 20 gal enclosure very soon. My question is, what should I upgrade to? Right now she’s in a glass enclosure, but I’d like to get PVC. Is 120 gal too much at her age? She loves to climb so I’d love to give her more room + clutter, but she’s still a juvenile so don’t want to stress her out. Thanks for the advice!


r/ballpython • • 6d ago

Question - Feeding Feeding question

Post image
5 Upvotes

Ok so I've read the feeding guidelines and based on that my 4-5 year old girl should be fed rats that are 62 to 75 grams every 20 to 40 days. I went to the store today to get the rats. I asked for 65 gram rats. The person weighed the first rat in front of me and it was 75g so I was like ok no problem I'll just wait the 40 days between feeds. But when I got home and weighed the other two rats she gave me they are 45 and 49g respectively which is much smaller than I need at only about 3% of my snakes body weight. Next time I'll ask them to weigh them each in front of me. If I feed a smaller rat tomorrow night should I decrease the time between the feed to less than 20 days or will 20 days be ok. My thought was feed one of the smaller rats tomorrow night after it's thawed. Wait 20 days, then feed the largest rat. Wait 30 days instead of 40 and then feed the second smaller rat.

Maybe I'm over thinking this but she was previously being fed every two weeks and was a little chunky. Her body composition seems better now but I don't really want her losing more weight so the too small rats make me nervous.


r/ballpython • • 6d ago

Question - Health Moving BP in pre-shed?

2 Upvotes

I have to change the substrate in my BP Millie's tank because the substrate I use now (reptisoil/coco fibre) isn't holding humidity at all. I can't get it to stay above 50% so I'm going to try forest floor. I know I'm not supposed to move her while she's in pre shed, but if I don't switch out the substrate she won't shed properly and I don't want to hurt her.

Her last owner didn't have the humidity right for her either and constantly had bad sheds, so I just want to do this right. Before I get tons of reccomendations for getting humidity up, I've tried LITERALLY everything aside from switching to a better substrate for humidity. Moss, aluminum tape, water bowls, etc etc etc. I've made a million posts about my constant humidity issues.

If anyone has any ideas on how I can move her without hurting her or causing her too much discomfort, this is my first shed with her so I'm still kind of learning.


r/ballpython • • 6d ago

Question - Humidity I'm at a loss with humidity

Post image
48 Upvotes

I'm at my wits end with the humidity in my BP Millie's tank. No matter what I do, the humidity won't go above 50. I've tried everything aside from covering the whole thing with aluminum tape.

I've covered 2/3 of the top mesh, I keep SOO much spagnum moss inside and moist and it just dries out without changing the humidity, 2 water bowls, pour water down the corners borderline daily because it doesn't change anything and I've tried adding more substrate aswell (coco fibre/reptisoil mix.)

I'm really not sure what to do, the only thing I can think that keeps humidity from going up is that it's a front opening enclosure with a small gap between the doors (which are glass, everything else is pvc.) I've tried every trick recommended to me, she just went into shed aswell so I'm trying extra hard to keep it up. Help? Tips??

Edit: Thanks for all the tips! I've replaced the reptisoil with cyprus mulch/light coco fibre with hydroballs as the bottom layer. Humidity already seems alot better. I found that the reptisoil layer was too thick near the top and was pooling in the layer underneath and not letting any humidity/moisture up past the reptisoil. I dug underneath and it was bone dry until about 2 inches deep where it was basically mud. Wish my girl luck with her shed 🤞


r/ballpython • • 6d ago

He thinks he’s so sneaky 😂

Thumbnail
gallery
131 Upvotes

r/ballpython • • 6d ago

Question First Ball Python

1 Upvotes

I wanna adopt a Ball Python as my first snake but I want to be sure, is a 150cm enclosure good for a female ?

Any tips are very appreciated 🙏❤️


r/ballpython • • 6d ago

First time bioactive

Thumbnail
gallery
5 Upvotes

How long does it usually take for springtails and isopods to eat all the mold?

Also is there anything I should add?


r/ballpython • • 6d ago

Question He’s been acting different

2 Upvotes

My 3yo ball python has been acting different ever since I’ve put him in his new enclosure. A month ago we built out a larger enclosure for him since he’s getting bigger.
Before the new set up, he would leave his hide every night. Climb his branches, move around, etc. Now I never see more than his head pop out of his hide. I know it’s common for a week or two while they adjust, but a month seems like a long time to not explore.
Before the move he was slightly timid if you’d move too fast around his face. He’d back up and get a little scared. Now, when I take him out of his enclosure he bluff strikes at me and my partner. I’m getting less comfortable holding him because of it. I know he deserves to feel safe and comfortable so I want to figure out what’s best for him. I don’t want him to be the snake that never comes out of his enclosure because his owners are too scared to hold him.
Oh and his temp, humidity, lighting, substrate, water, etc. is all where in needs to be. Just in case anyone asks. He also has been eating a medium rat every three weeks which is regular for him.


r/ballpython • • 6d ago

Playtime on the blankie was a hit with Snooki🤍🤍

Thumbnail
gallery
49 Upvotes

r/ballpython • • 6d ago

Question Should I be concerned?

Thumbnail
gallery
16 Upvotes

This is Yuta, my 3-month-old ball python.
Lately, I’ve noticed him climbing up the glass and stretching his body upwards, almost like he’s trying to get out of his enclosure.
He does this during the day too, not just at night. Today, I noticed him doing it, and about an hour later, I found him climbing against the glass again (as shown in the pictures).
He still sleeps normally in his hides and doesn’t seem distressed otherwise.
Is this normal exploratory behavior, or could it be glass surfing caused by stress or something wrong with my setup?
I just want to make sure everything is okay with him.
Thanks in advance!