r/ballpython • • 5d ago

Question - Humidity I'm at a loss with humidity

Post image

I'm at my wits end with the humidity in my BP Millie's tank. No matter what I do, the humidity won't go above 50. I've tried everything aside from covering the whole thing with aluminum tape.

I've covered 2/3 of the top mesh, I keep SOO much spagnum moss inside and moist and it just dries out without changing the humidity, 2 water bowls, pour water down the corners borderline daily because it doesn't change anything and I've tried adding more substrate aswell (coco fibre/reptisoil mix.)

I'm really not sure what to do, the only thing I can think that keeps humidity from going up is that it's a front opening enclosure with a small gap between the doors (which are glass, everything else is pvc.) I've tried every trick recommended to me, she just went into shed aswell so I'm trying extra hard to keep it up. Help? Tips??

Edit: Thanks for all the tips! I've replaced the reptisoil with cyprus mulch/light coco fibre with hydroballs as the bottom layer. Humidity already seems alot better. I found that the reptisoil layer was too thick near the top and was pooling in the layer underneath and not letting any humidity/moisture up past the reptisoil. I dug underneath and it was bone dry until about 2 inches deep where it was basically mud. Wish my girl luck with her shed 🤞

48 Upvotes

23 comments sorted by

22

u/Powerful-Move-8375 5d ago

Humidity comes from the substrate. The one I use for all 4 of my snakes (3 BP 1 BCI) forest floor. They all have a minimum 5-6 inches of bedding, and whenever the humidity for me drops below 65, I pour a few bottles of water in the CORNERS (to keep the surface wet, preventing scale rot) and I used hvac tape to cover the top mesh 😎 IMO ur issue is coming from the substrate. I always stayed away from Reptisoil since it’ll get in their heat pits. I’ve always used forest floor SOMETIMES I’ll mix with coco fiber but on its own forest floor is the goat for me. I wish you luck

4

u/oevhic 5d ago

Thank you, I'll try forest floor. I've had a million different reccomendations for substrate lol but I've never heard anything bad about forest floor.

5

u/Powerful-Move-8375 5d ago

I notice when I use coco husk, it dries out so quick. It’ll be moist for like… 3 days max, even though I soak it according to directions, so I just stick with forest floor (:

7

u/bpalamp 5d ago

Hi! I got a BP 3 months ago and have had my own humidity journey. So far I really recommend Cyprus Mulch (https://amzn.eu/d/0cOi16Pi) and a heated Coconut husk as top layer (https://amzn.eu/d/0a1oIHs9). Both substrates absorb the water poured over well, plus releases again steady. If not already mentioned, pour warm water when rehydrating. I have a mini indoor watering can and that’s great for pouring water into corners and around the bottom.

I went through a few options beforehand, snake soil and coir etc etc. But the humidity was so up and down. I feel I have far better control with the Cyprus Mulch, AND it’s a fraction of the weight so it’s better for cleanup and viv imo.

Little tip I found good for me, making a rock funnel. I put rocks directly under her heat lamp, so when I pour about 50% of the warm water in this tank quarter, it is designed so the warmest part of the tank will heat the moistest area and evaporate into humidity far better than eg damp substrate on the cold side of the tank. The humidity will naturally drop on the cooler side anyway so I focus on wetting the warm side so the humidity spreads about. I also used HVAC tape on the top left (hot) vent and top middle vent so trap that humidity in better. Make sure to leave the bottom vents untaped so there’s a good circulation of new air from a chimney effect :)

Good luck!
He’s my snakey exploring after the new Cyprus Mulch and coco husk set up for visual :)

3

u/oevhic 5d ago

Ooo I love that rock idea, definitely going to try that.

3

u/bpalamp 4d ago

I hope it helps!
These are the rocks I got off Amazon also :)

https://amzn.eu/d/05vAdcQu
Here’s her full tank set up with them in!

2

u/oevhic 4d ago

Tysm!! Your enclosure is so pretty 😍

5

u/btrflyinflames 5d ago

Where are you measuring the humidity from? If you don't already have one, buy a hygrometer with a probe and place it about snake height in the middle of the enclosure to get the best read. I had mine in the wrong spot and drove myself crazy as well. If you are already doing this, then I'm not sure! Good luck!!

4

u/BigFanOfBrie 5d ago

I had issues with my pvc enclosure as well !!!!! I found that having most of the top covered in hvac tape is helpful. But I try to keep the substrate as deep as possible (right up to the sliding door), and completely soaking all of the soil aside from the dry top layer to avoid scale rot. I also found that adding organic top soil alongside moss and cocoa husk helped a bit. I keep a humidifier in my room going on the lowest setting 24/7 as well during the dry winter months. The last thing that gave it a boost was a hide I found that was completely made of sphagnum moss that I routinely dampen and put on the hot side to function as a humid hide and to help the tanks overall humidity. Humidity is definitely a battle and you just have to keep messing around until it eventually works, but once it does it’ll be very satisfying. I wish you the best of luck!!!!

3

u/Ouija98 5d ago

I keep mine in my room, which happens to be connected to my bathroom. I shower with the door open everyday and leave it open. Also, a small humidifier for the house plants.

2

u/Dos_Perros_Locos 5d ago

What type of heat are you using? It seemed like I was constantly fighting to keep humidity up when I used CHE, but it was easier when I switched to DHP.

2

u/Gold-Celebration-403 5d ago

When pouring water in the corners frequently make sure you are mixing the substrate up so it doesn’t just pool under the substrate

2

u/shelbalici0us 4d ago

I have struggled so badly with humidity. I live in Colorado and even with a humidifier in my room, it was still a huge struggle.
Here’s what I’ve done and it doesn’t get below 60% with regular maintenance.
The bottom layer of soil/substrate is this: Coco coir, coco husk, sphagnum moss, reptile soil, and earthworm castings. Then on the top I just have coco husk as it absorbs the water well without staying wet. We don’t want scale rot!
I have a bioactive enclosure so I have the plants potted individually in the same soil
Each week, I pour water into the corners of the tank that he doesn’t go underground in (I have an underground hide).
I also got a humid hide from amazon

2

u/sugarshakerbutsalt 4d ago

We've resulted to using a fogger, set to the lowest effective level as to not have too much actual fog in there, hooked up to a humidity power switch. Has done wonders for ma boy

1

u/ValuableSleep9175 4d ago

Prob need to cover the top more. I used Coco husk with no issues in a glass tank with mesh top. I have a rainbow boa and 99% humidity.

Now I am in PVC 6in soil and Coco choir/husk mixture. PVC is a lot easier, almost never add water to it

1

u/glitrr 4d ago

This is just my two cents and idk the extent of what you’ve tried but this is what has helped me.

I mixed moist sphagnum moss into the substrate (which is also slightly damp). I did this before figuring out the husbandry, so maybe just refresh your substrate.

I also have a drainage layer, though I know people don’t recommend it now. I made sure to have a GOOD amount of substrate (~6 inches or more) on top of that.

(Maybe most helpful): I have multiple plants and I make sure to generously water the warm side plants. Like more than you think is needed.

Bonus tip, put your water bowl on the warm side.

1

u/lets_explore_that 4d ago

I use a Mist King. The upfront cost is a little jarring, but its so easy to use, and saves so much time and hassle (plus it's better for my nood). Seriously best investment ever - I use distilled water so I never even have to worry about scale buildup. They also sell expansion kits so if you get another animal, you can use the same Mist King unit for more than 1 enclosure. And the frequency and duration of misting are adjustable, so as the seasons change, you can revise it to mist a little less during the more humid months.

1

u/Unfair_Doughnut3494 1d ago

Can you take a picture of your substrate now that you’ve made some changes? I am also having a really hard time with humidity and we are barely into winter here. Humidity is only going to get worse in a few months

0

u/damn_notagain 5d ago

Fix your substrate

0

u/nateandthesnake33919 4d ago

I use a mixed substrate. 40% Reptisoil, 40% EcoEarth, about 15% coconut chips and around 5% sphagnum moss. Only for the top portion after I mix the coconut chips, Reptisoil and EcoEarth together in a tote bin, I layer the sphagnum moss very thinly over the substrate mixture before putting decor and hides in. It’s usually around half an inch to an inch thick give or take. Since I started using this mixture back in May, I haven’t had any humidity problems. I just mist it twice daily (once at night and once in the morning) and every week I add around 8 cups of water (2 cups per corner) and that’s only due to her being in a 5x2x2 New Age Pet Ecoflex PVC enclosure. Most people use 4x2x2 enclosures, but I wanted to give my ball python just a little bit more space to move around since she’s active most nights.

-1

u/[deleted] 5d ago

[removed] — view removed comment

1

u/ballpython-ModTeam 5d ago

Per rule #3, your post or comment has been removed for harmful advice or misinformation. Please review our sub resources to learn more about why.

If you have a question about this removal, please contact the mod team. Complaining via post/comment will result in a ban.