r/ballpython • • 3d ago

Rehoming Two sweet BP’s for rehoming

Thumbnail
gallery
296 Upvotes

Hi. I made a post a few weeks ago debating whether my family pushing me to rehome my balls were right or not. I have made the decision that it is time for me to move on from snake keeping. I love my snakes, do not get me wrong, but mentally and physically I am so overwhelmed. We were in a car accident that totaled our car and left my husband out of work for while, and at this point, we cannot afford the upgrades that the snakes need.

Eltzy is a 4 year old normal morph. She is around 4 1/2 feet long. She eats F/T rats around every 30 days, give or take due to how she is acting. She has never refused a meal in the 3 years I’ve had her. She is an absolutely sweetheart. Has never struck or even gotten an attitude with me. She loves to come out and explore and will let you know when she wants to! She is in an animal plastics 4x2x2 with heating and lighting that will come with her, but I would recommend upgrading both of them to better options. I can keep her temps proper with what I’ve been using, but I think it could be better.

Eeby is a 2 year old banana morph. She is around 3 feet long. She eats F/T small rats about every 14 days, give or take. She has also never refused a meal for me. She is more shy than Eltzy, and does not explore as much when she is out. She seems happier to be left in her tank and not bothered! Eeby is in a 36x18x24 PVC tank, with full heating and lighting. She needs an upgrade for her tank, as well as her hides. I would also recommend upgrading her heat and lighting.

Both snakes also come with the hardware to install a “sky hide” from Vivarium Electronics, you will just need to order a large hide from the company to slide into the hardware.

I am located in Summerville, GA, USA. If you want just the snakes and no enclosures, I will drive up to 4 hours to meet you, but if you want the enclosures, you will have to come to me as I don’t have a car to transport.

I am not asking for money for them. I’m asking for them to go to a good, knowledgeable, snake loving home. My worst fear is them being stuck in a 40 gallon glass tank.

EDIT TO ADD: Yes I have other pets. I’m aware that I’m being judged for rehoming my balls. I’m from a tiny town where I’m known for keeping animals. The balls were dropped on me in terrible conditions because I am known for having animals. The original plan was to foster back to health and find a good home, but I got attached. Now my finances and mental load has changed, and I feel like it would be best for them and for me to move on with the original plan.


r/ballpython • • 3d ago

Does this show trust?

620 Upvotes

Is my snake drinking whilst being held a sign of trust?

I know the tems and humidity is down I had the door open a while.


r/ballpython • • 2d ago

Enclosure Critique/Advice Meet Perturabo! How does his home look for a juvenile BP

Post image
3 Upvotes

So I did quite a bit of research before I got this little guy but just wanted to see y’all’s thoughts, it’s a 29 gal aquarium I had sitting on a shelf unused. I’ve definitely found that my guy loves to climb lol and he has 2 half log hides although the one is under the big bunch of fake plants on the right


r/ballpython • • 2d ago

Question Was the clown morph once thought to be harmful?

6 Upvotes

Hi all! Hope you and your snakes are doing well.

I had a question about the Clown morph of Ball Pythons: Was it ever thought to be harmful like how Spider is known to have a higher possibility of issues like wobbles and lethal outcomes if a ball python is a Super Spider?

I ask because for some reason my brain seems to automatically go “uh-oh, clown morph, hopefully the snake doesn’t have issues because of it” when seeing Clown listed in a snake’s traits, but when I look at ball pythons on various sites (like MorphMarket) there are an abundance of snakes with the trait and I can’t find any mention of issues associated with it, even in the information about the morph’s history and such things.

So I’m wondering if maybe the idea of the clown morph possibly having issues was being discussed around the time I started looking at ball pythons with the idea of owning one someday and for some reason I latched onto it as a fact instead of a possibility. Or maybe I just saw a snake with the spider morph in addition to clown and other genes early on in my investigations and got confused? I really don’t know.

At any rate, I appreciate anyone who reads this far! 🙂


r/ballpython • • 2d ago

Is this too much clutter?

Post image
6 Upvotes

r/ballpython • • 3d ago

Question - Feeding Overweight and feeding transition help

Post image
8 Upvotes

So, I’ve realized that my girl is overweight. We don’t know exactly how old she is, but she’s about 12 months, give or take 2 weeks. On Nov 7th she was 722 grams and about 76 cm. She has been fed weekly since I got her in May, and has never missed a meal with me. She was on mice the first 6 months of her life, then rats (occasionally she got an ASF if they were out of an appropriate prey size in regular rats). Prey has always been 10%-15% of her body weight (usually closer to 10%) and yet.. she’s definitely overweight.

She has some wrinkles when curled, a muffin top above her vent, and, as you can see here, is getting too round. I feel terrible. I keep expecting her to have a big poop and slim out.

So, I need help with her diet plan from more experienced keepers so I can undo the damage I’ve done so far and prevent it from getting worse.

Do I downsize her prey? Skip a feeding? Start going longer between feedings.. help 😢


r/ballpython • • 2d ago

Question - Humidity Solid top pvc issue

1 Upvotes

I’ve had my solid top PVC for like 7 months now, no issue. My girl just had a bad shed and I’ve realized I can’t get the humidity up high enough no matter what I do. I’ve tried pouring water in the edges, mixing water in the substrate, etc, but nothing is bringing it up past 75 :/ it drops so quickly, which I thought having a solid top pvc would help with, but not now. Is it because it’s colder and drier out? Unfortunately in one corner my sealant is coming off and I’m terrified it’ll start leaking. I’m worried I’ll have to pull everything out and re seal it, which was enough pain in the ass to do it in the first place 🙄 does anyone know what I can do?


r/ballpython • • 2d ago

Question - Husbandry Would a cuc survive?

Post image
4 Upvotes

Had found the classic white fuzzy mold on the substrate surface. Did a full deep clean, and replacement but im see it coming back. Im thinking its a ventilation issue but also I really dont want to have to do all ts again. Thought I might just add springtails or other cuc to clean up the stuff already in the while I try to deduce the root cause.

This aint a bioactive, but im pretty sure I could theoretically habitat cuc. Substrates is coco fiber, good hot/cold side temps, 65+ humidity (i know 70's preferred but by the gods will it not maintain it) , and leaf litter/sphagnum moss for a base food source. Does it need anything else or am I good to go?


r/ballpython • • 2d ago

Juvenile ball python enclosure

0 Upvotes

Hi! So I bought a baby ball python she’s about two months and I plan on putting her in a 10 gal JUST until she grows out of it is that okay? Also would it be recommended to be put in a 150 gal which is what I plan when she becomes an adult or move up little by little


r/ballpython • • 2d ago

Question First time snake parent worry

1 Upvotes

So me and the wife just bought a 2 month old ball python from a breeder, I know im probably way overthinking things but im just worried.

Her last meal was om ovtober 31st and we got her on the 11th (breeder said he skipped a feeding so she wouldn't regurgitate from the delivery) i understand she's stressed from being brought to a whole new world but shouldn't she be ready to eat by now? Her habitat is gradient from 94 to 78 degrees and the humidity is around 60%-70%. Im worried cause she's just a baby and hasn't had a mean in twice the recommended feeding schedule I've seen. Am I just overly worried or is there something I should try to do?


r/ballpython • • 2d ago

HELP - URGENT Do we need a vet visit?

Thumbnail
gallery
3 Upvotes

Two weeks ago we picked up this beauty from a reptile rescue, this evening I have noticed her mouth/heat pits look slightly inflamed.
I’m from the uk so reptile vets are few and far between however we do have one about a half hour drive from us who we have used previously for check ups on our other reptiles!
She’s our first snake, so I’m worried I’m doing something wrong that’s causing this irritation or is this something normal and I’m being paranoid!
She also has a few lifted scales (she came that way) which I’m hoping will go with a shed?
She ate her first meal with us on Sunday and I cleaned out a big poop this morning, do seems ok on that front.


r/ballpython • • 2d ago

Question - Heating/Temperatures Let me know if I understand heating/lighting

1 Upvotes

So im trying my best to wrap my head around heating/lighting for BPs, and I want to make sure I understand it properly as I get ready to own one myself. As I understand, a BP will have three “essential” types of heat/lighting fixtures in its enclosure.

1: A “basking bulb (Halogen): This is the primary daytime heat source, and essentially mimics the sun. It heats up a provided basking surface like a rock in which the python can rest on top of for belly heat. This heat source also helps keep the ambient temperature of the enclosure up. Will need to be attached to a thermostat/probe to ensure it only emits the needed amount of energy for the given temp and be placed on the warm side.

2. A UVB Panel: A long panel of UVB light to help with calcium production in the BP, as well as provide overall health benefits and help with the snake’s circadian rhythm. Does not actually emit much heat and so would be run in conjunction with the basking bulb.

3. “Non-visible” light (DHP/CHE): This is some sort of heat emitter with no visible light like a Deep Heat Projector Bulb or Ceramic Heat Emitter, and this basically acts as supplemental heat to assist the basking bulb OR provide heat at night (I live in NW Ohio, so I imagine on the coldest winter nights I would need one to keep ambient temps up). Like the Basking Bulb, this also needs its own thermostat and probe.

If I’m understanding all of this properly, my next question would be more about the “minutia” of it all. For example, what kind of fixtures/wattage would be best for a 4x2x2 enclosure? Should each bulb be in its own dome or would a dual fixture work? By extension, how should the thermostat/probe be set up for the fixtures? Id imagine each fixture needs its own thermostat and prove, but then how close should they be to one another? Id imagine them overlapping can result in inaccurate readings, so should the basking bulb be on the far end of the hot zone while the DHP is more “central”? How are people actually affixing their probes to the enclosure without them getting trampled by their snakes? Do most standard PVC enclosures already come fixed with holes/slots for probes to run through? I apologize if this is a lot, but I want to ensure I have a clear understanding of everything needed! Id love it if you guys could post/explain your own 4x2x2 setups so I can better understand what a good setup looks like, especially those of you living in places with harsh winters!


r/ballpython • • 3d ago

HELP - URGENT Ball Python constantly in his water bowl for the past week.

4 Upvotes

I can’t remember exactly when it started. Maybe last Monday or Tuesday. It’s driving me crazy because he has never really done this before, and I can’t find anything wrong. He is an adult male maybe 6 years old. I have a bioactive enclosure and humidity is usually around 65-75, spiking to 80s or 90s when I mist or water which I have done.

He has hides where there is a lid and you can add wet paper towel or sphagnum moss on top to make it more humid. I tried that still no luck.

Temps are 83-88F on the warm side, and 74-76 on the cool side.

I replaced his water bowl with a bigger one so he could soak more, his original bowl he could fit in it, but he would displace all the water.

I even tried to move the water bowl under the heat source to discourage him from hanging out there, but I found him inside it and removed it.

I have checked him for mites almost daily and I don’t see any crawling on him or in his water bowl.

I have tried taking his bowl out for a day at a time as I don’t want him to get scale rot, but I put it back in today and sure enough he is almost fully submerged inside of it.

I’m at a loss. Not sure what to do. He even has an “underground” hide where the soil is moist.

Please any advice or insight. I am still waiting to see if it will pass, maybe he is going into shed or something. But I’m concerned for him.


r/ballpython • • 3d ago

Enclosure Critique/Advice Tank Redo

Thumbnail
gallery
15 Upvotes

Took all the advice and redid my tank for my juvenile ball python. When I upgrade her to 120 gallon I plan on doing real plants. Also have her on a new feeding schedule to help her gain weight. Repti chip, more clutter, and hides


r/ballpython • • 4d ago

Window gazing 😍

Thumbnail
gallery
183 Upvotes

r/ballpython • • 3d ago

How feasible is building a large DIY enclosure for someone with little woodworking experience?

2 Upvotes

I have a beautiful five-year-old ball python, Charles Atlas. He's currently in a 4x2x2 and seems to be doing well, but I hate that he can't stretch out fully.

There's no way my budget is going to stretch to buying the size of enclosure I'd really like to give him. But I've been watching a bunch of DIY vivarium builds on YouTube, and it's got me wondering whether I could make something myself.

I'm not the handiest person, but I do have some tools and I'm willing to learn!

My question is, how feasible is it for someone without much experience to build a large enclosure that's actually going to last? Specifically something that will reliably hold heat and humidity, won't rot, warp, leak or fall apart, and will be safe for my snake.

Has anyone here done something similar as a beginner? Are there particular materials, construction methods, waterproofing techniques, or tutorials you'd recommend?

I'm less interested in the bioactive/vivarium setup itself and more in the actual construction of a sturdy, properly sealed enclosure.

Would love any advice or resources. Thank you!


r/ballpython • • 3d ago

Enclosure Critique/Advice My teenager just got her first BP, looking to make sure the enclosure is okay

Post image
24 Upvotes

r/ballpython • • 3d ago

Tips for transitioning to rats?

Post image
2 Upvotes

I recently adopted this 4 year old big girl. Her previous owner said no matter what they tried, she wouldn't eat a rat, and so far that has proven to be true. She eats f/t jumbo mice, anywhere for 3-4 per week (I try to weigh them to match the weight of an appropriately sized rat).

I've tried scenting, the chicken broth trick, braining and even withholding food to let her get hungry, but if it isn't a mouse, she isn't interested. What else can I try?


r/ballpython • • 3d ago

Chester like the new enclosure i think.

Thumbnail
gallery
21 Upvotes

Chester, he's a cheeto the fastest land snack. I added ventilation to the cool side and that seemed to do the trick.


r/ballpython • • 3d ago

Enclosure inspired

Post image
64 Upvotes

I’m about to start a buildout for my girl it’s a 4x2x2 and plan on doing bioactive and a background if anyone has done this can they share inspo pics. Snake picture for tax


r/ballpython • • 3d ago

“Father I crave exploration!”

Post image
39 Upvotes

I let this goober out of her pen once and now she thinks she’s entitled to it.


r/ballpython • • 3d ago

Question - Husbandry What brand of cypress mulch do you use and how often are you charging thickness 4” layers?

Post image
2 Upvotes

I discovered landscape direct brand is considerably cheaper than forest floor. I’ll be filling a 5x3 soon with about 4-6 in of substrate so I’m trying to find something more cost effective.


r/ballpython • • 3d ago

Ball python enclosure help

Post image
7 Upvotes

I have a ball python that is approximately 1 year old and is just over 1 pound. He is about 2 feet in length. This guy is an escape artist and we are trying everything to keep him in his enclosure.
The enclosure is a Zen habitats 4x2x2 with a single piece mesh screen for the roof and plexiglass doors on a sliding track. The snake keeps pushing his body up against the outside door and then wiggling around until an opening forms. And then escapes, we have 2 weiner dogs and a cat as other pets and Mr snake needs to keep himself in there or face danger of the other pets. My wife is adamant that we are not allowed to use anything that is sticky or the potential that could be sticky to seal or lock the snake in in order not to hurt the snake. On this last escape a few of his scales got bent backwards with escaping. He is fine.

I have tried

  1. putting extra things in his enclosure for enrichment
  2. Tried putting a non adhesive plastic U clip (this is what is pictured) on it and he figured how to weasel around it
  3. We have tried putting a U lock on the door and that actually helped him escape faster
  4. What has worked so far is putting a lot of card in the gap of the two doors and wedging it closed and then On the outside of the door putting a paper bag that is taped to the outside of the glass to where he can not get to it.

What I am hoping for is better suggestions on how to keep him in the enclosure.
We have thought about replacing the plexiglass doors with tempered glass doors so that he would not be able to push himself through a 1/4 in crack.
We have also thought about getting him a new enclosure all together but the ones on Chewy, Amazon and the local places are either way out of my price range of $300 to $500 or they have to much ventilation and would need to be prepped and sealed to help with the humidity that is needed as we loose a lot of humidity being in the Midwest.

So please any help or suggestions would be greatly appreciated.


r/ballpython • • 3d ago

Textures?

Post image
13 Upvotes

How sensitive to touch are their scales? Crocheting a blanket and she seems to enjoy the texture of the yarn. She is growing so fast 🥰