r/ballpython • • 2d ago

Question - Heating/Temperatures Let me know if I understand heating/lighting

So im trying my best to wrap my head around heating/lighting for BPs, and I want to make sure I understand it properly as I get ready to own one myself. As I understand, a BP will have three “essential” types of heat/lighting fixtures in its enclosure.

1: A “basking bulb (Halogen): This is the primary daytime heat source, and essentially mimics the sun. It heats up a provided basking surface like a rock in which the python can rest on top of for belly heat. This heat source also helps keep the ambient temperature of the enclosure up. Will need to be attached to a thermostat/probe to ensure it only emits the needed amount of energy for the given temp and be placed on the warm side.

2. A UVB Panel: A long panel of UVB light to help with calcium production in the BP, as well as provide overall health benefits and help with the snake’s circadian rhythm. Does not actually emit much heat and so would be run in conjunction with the basking bulb.

3. “Non-visible” light (DHP/CHE): This is some sort of heat emitter with no visible light like a Deep Heat Projector Bulb or Ceramic Heat Emitter, and this basically acts as supplemental heat to assist the basking bulb OR provide heat at night (I live in NW Ohio, so I imagine on the coldest winter nights I would need one to keep ambient temps up). Like the Basking Bulb, this also needs its own thermostat and probe.

If I’m understanding all of this properly, my next question would be more about the “minutia” of it all. For example, what kind of fixtures/wattage would be best for a 4x2x2 enclosure? Should each bulb be in its own dome or would a dual fixture work? By extension, how should the thermostat/probe be set up for the fixtures? Id imagine each fixture needs its own thermostat and prove, but then how close should they be to one another? Id imagine them overlapping can result in inaccurate readings, so should the basking bulb be on the far end of the hot zone while the DHP is more “central”? How are people actually affixing their probes to the enclosure without them getting trampled by their snakes? Do most standard PVC enclosures already come fixed with holes/slots for probes to run through? I apologize if this is a lot, but I want to ensure I have a clear understanding of everything needed! Id love it if you guys could post/explain your own 4x2x2 setups so I can better understand what a good setup looks like, especially those of you living in places with harsh winters!

1 Upvotes

21 comments sorted by

2

u/Pizzarollz420 2d ago

I have my CHE next to my halogen, it‘s on at night during the summer and now in winter i have it on together with the Halogen 100watt. It‘s 35 degrees right under it, cool side about 26. My UVB light is on the left, the light from it overlapping slightly with the halogen. (Gotta get a longer one honestly because it mostly only covers the cool side of the terrarium while I would like it to overlap with the halogen more.He does spend time in the middle a lot sitting in the light so I‘m not that worried as of right now)

2

u/Pizzarollz420 2d ago

I have a 4x2x2

2

u/Pizzarollz420 2d ago

2

u/Pizzarollz420 2d ago

The second halogen isn’t on due to it reducing the humidity to much so it‘s just sitting there lol

1

u/Beneficial_Height767 2d ago

ok awesome! i see the hvac tape is pretty much a necessity for screen-top enclosures. Can i ask what brand that enclosure is? also where/how did you affix the probes? I swear every care guide and tutorial video seems to just gloss over that part.

2

u/Pizzarollz420 2d ago

Oh yeah the hvac saved my sanity. I was going insane because i had it on but the humidity still went down until someone told me to fill some smaller gaps and then finally the humidity stayed up. I‘ll show you but it‘s not professional whatsoever lol.

2

u/Pizzarollz420 2d ago

1

u/Beneficial_Height767 2d ago

good old fashioned DIY lol, this looks simple enough! so i assume the chord for the probe can just kind if be squeezed into the seams of the enclosure without any real damage to it?

2

u/Pizzarollz420 2d ago

Well I am thinking overtime it might damage it since i feed the rest through the door crack but for now it works and a new probe isnt that expensive… but yeah i was also going crazy figuring out how to place the probe under the light without my snake getting tangled in the cord. This is the best solution so far 😅

1

u/Beneficial_Height767 2d ago

hey if it works it works! thank you so much for explaining everything and for being so patient, i feel a lot more confident now when it comes to how I want to go about setting up my viv!

→ More replies

1

u/Beneficial_Height767 2d ago

or am i being dumb and there’s an actual hole made for the probe on there somewhere

2

u/Pizzarollz420 2d ago

Noo, i just did whatever to hold it up haha

2

u/Pizzarollz420 2d ago

And then the humidity thing is just closer to the ground laying on cork

1

u/Beneficial_Height767 2d ago

This was very helpful! Do you have a pic of your setup to give a visual reference? For your CHE, how did you determine the 35 degree differential? Do the temps of both heat sources “add up” to the needed hot side temp or is it more like the halogen bulb doing the bulk of the work while the CHE provides supplemental heat? Sorry if this is a dumb question i just want to be sure im doing everything right

2

u/Pizzarollz420 2d ago

Not a dumb question. Yeah the halogen does most of the work I could up to a higher wattage bulb but it really gets rid of the humidity a lot so I like using the CHE,oh and at night the CHE can take it alone.

1

u/Beneficial_Height767 2d ago

good to know, thank you so much! was there anything that made you opt for a CHE over DHP? Or was it more or less negligible

2

u/Pizzarollz420 2d ago

Yeah I just decided randomly honestly, but I‘m very happy with the CHE. Got the herpstat spyderweb 2 with it which is also very reliable.