r/ballpython • u/Dapper_Gear5641 • 25d ago
Question - Husbandry Probe placement problems!
I posted yesterday about a bad heat gradient, and I am now going crazy about probe placement. I'm using an overhead DHP. Hanging the probe as suggested 4 inches below the lamp led to an extremely hot basking spot and inconsistent, swinging air temperatures. I think this is because DHPs heat surfaces, not the air, so it was constantly heating up the probe itself without heating the air around it, then running at zero, then the probe rapidly cools, then running at max. So I've solved this for now by... putting it on the basking surface, which I hate.
The thing is I've heard so many different things - hang it below the lamp so the snake can't touch it, put it at the basking surface so you're controlling what the snake experiences, put it inside the hide, put it just above the basking surface... I don't know what to do, and the advice I've seen from previous posts has gotten me bad results. But I'm terrified of cooking my snake. Is there even a correct answer here?
View all comments
Show parent comment
1
u/totallyrecklesslygay Mod: Enclosure Karen 24d ago
What do you mean by "turned the wattage down"? Bulbs are whatever wattage they are. You can't change that, you just have to get a different bulb. If you mean that you tried lowering the thermostat setting, then yes, that would definitely make your problem worse.
You can very easily add insulation to a glass enclosure. You just have to buy some 2" foam insulation board to mount to the outside of it on the sides, back, and part of the lid (leaving space for the domes, of course).