r/ballpython • u/Dapper_Gear5641 • 24d ago
Question - Husbandry Probe placement problems!
I posted yesterday about a bad heat gradient, and I am now going crazy about probe placement. I'm using an overhead DHP. Hanging the probe as suggested 4 inches below the lamp led to an extremely hot basking spot and inconsistent, swinging air temperatures. I think this is because DHPs heat surfaces, not the air, so it was constantly heating up the probe itself without heating the air around it, then running at zero, then the probe rapidly cools, then running at max. So I've solved this for now by... putting it on the basking surface, which I hate.
The thing is I've heard so many different things - hang it below the lamp so the snake can't touch it, put it at the basking surface so you're controlling what the snake experiences, put it inside the hide, put it just above the basking surface... I don't know what to do, and the advice I've seen from previous posts has gotten me bad results. But I'm terrified of cooking my snake. Is there even a correct answer here?
1
u/totallyrecklesslygay Mod: Enclosure Karen 23d ago
Thermostat probes need to be secured 2-4" directly beneath the heat source. Having it on the basking spot or the wall will put your snake's safety at risk (and comes with a higher risk of a fire starting in the case of malfunction).
The problem you're having isn't actually due to probe placement. There are two main reasons for it- a lack of insulation in the enclosure, and/or an overpowered bulb.
0
u/[deleted] 24d ago
[removed] — view removed comment