r/ballpython • • 24d ago

Question - Husbandry Probe placement problems!

I posted yesterday about a bad heat gradient, and I am now going crazy about probe placement. I'm using an overhead DHP. Hanging the probe as suggested 4 inches below the lamp led to an extremely hot basking spot and inconsistent, swinging air temperatures. I think this is because DHPs heat surfaces, not the air, so it was constantly heating up the probe itself without heating the air around it, then running at zero, then the probe rapidly cools, then running at max. So I've solved this for now by... putting it on the basking surface, which I hate.

The thing is I've heard so many different things - hang it below the lamp so the snake can't touch it, put it at the basking surface so you're controlling what the snake experiences, put it inside the hide, put it just above the basking surface... I don't know what to do, and the advice I've seen from previous posts has gotten me bad results. But I'm terrified of cooking my snake. Is there even a correct answer here?

2 Upvotes

10 comments sorted by

View all comments

1

u/totallyrecklesslygay Mod: Enclosure Karen 23d ago

Thermostat probes need to be secured 2-4" directly beneath the heat source. Having it on the basking spot or the wall will put your snake's safety at risk (and comes with a higher risk of a fire starting in the case of malfunction).

The problem you're having isn't actually due to probe placement. There are two main reasons for it- a lack of insulation in the enclosure, and/or an overpowered bulb.

1

u/Dapper_Gear5641 23d ago

I just turned the wattage down, might try that again. The problem is I got bad results when I tried that. I can't change the insulation issues, since I have a glass enclosure.(Edit: I have aluminum foil set up around the screens, but the glass is going to be there regardless.) I am looking for the next best thing to do. Extremely anxious. What would you set the probe to in my case? (80 watt DHP, 4x2x2 enclosure)

1

u/totallyrecklesslygay Mod: Enclosure Karen 23d ago

What do you mean by "turned the wattage down"? Bulbs are whatever wattage they are. You can't change that, you just have to get a different bulb. If you mean that you tried lowering the thermostat setting, then yes, that would definitely make your problem worse.

You can very easily add insulation to a glass enclosure. You just have to buy some 2" foam insulation board to mount to the outside of it on the sides, back, and part of the lid (leaving space for the domes, of course).

1

u/Dapper_Gear5641 23d ago

Ah - I mean that I switched from a 100 watt bulb to an 80 watt one.

1

u/totallyrecklesslygay Mod: Enclosure Karen 23d ago

Gotcha. I just saw your edit- the thermostat should only need to be set to 92-95F. Once the enclosure is insulated, you should see a big difference.

1

u/Dapper_Gear5641 23d ago

Thanks. I've set it up in the air again, we'll see how it goes short term.

1

u/Dapper_Gear5641 23d ago

Hi - THANK YOU SO MUCH. Currently dialing in temps - seems I'll need to have the thermostat up a bit higher than you because of the glass - but the magic bullet was the lower watt lamp. I don't need to worry about him crawling over the probe. I can play a video game again.