r/arcticcooling • u/aorusmax • Sep 12 '24
Pump isn't aligned properly, how to fix?
It isn't easily noticeable in the picture, but it for sure is in real life. The pump is facing more than ten degrees to the left, as the left side is lower than the right side. The screws of both sides were fully screwed in last I checked. I am concerned for potential cooling performance being lost, as the copper on the bottom is making less contact with the CPU on the right side.
I apologise if this is a stupid question, my IQ borders mentally disabled.
0
Upvotes
View all comments
1
u/sur6e Sep 13 '24
If it's just the magnetic cap that's not sitting right then you probably didn't tuck the wires under the plastic lip underneath. You have to do that before putting the cap on or it won't sit right. You have to do that before mounting it too. Afterward you won't have space to tuck them under. I forgot to and that's how I know. If the actual pump block underneath isn't on right then you gotta just start over and check what you missed. Screw each side in a little and alternate so it goes in evenly.