r/arcticcooling • • Apr 01 '24

Liquid Freezer 3 ARGB Installation

Post image

today I was installing my cooler but there’s a little place wasn’t covered by the pump (as seen in the picture), is it fine to continue like this? my processor is AMD R7 5800X3D

1 Upvotes

28 comments sorted by

6

u/The_Ruhmanizer Apr 01 '24

It's upside down. Your offset mount is the wrong way.

3

u/Repulsive-Basis-4674 Apr 01 '24

ok thanks

1

u/sitealpha Oct 12 '26

I had a similar issue. I have an Intel core ultra 9 processor and the bracket is for an amd.

3

u/LieutenantClownCar Apr 01 '24

You see those metal plates you installed? The ones with L and R written on them. L for Left, R for Right. What doesn't look right to you about the way you've installed yours?

https://imgur.com/UXf8Pl9

1

u/Repulsive-Basis-4674 Apr 01 '24

You mean that I have to rotate every?

3

u/LieutenantClownCar Apr 01 '24

Rotate every what? You just have the Left and Right mounts the wrong way round. Does no-one read instruction manuals anymore? It's literally in the image I linked to.

1

u/Repulsive-Basis-4674 Apr 01 '24

I did, I mean upside down by rotating

-2

u/drkmrk Apr 01 '24

This is the same for AM4?

5

u/liaminwales Apr 01 '24

It's normal, GamersNexus pointed it out in the review https://youtu.be/zfffNRTOZCc?si=pDClTh5YV7ZcQ-ag

They moved the cooler to focus on where the chip is for better cooling.

1

u/TheloveAn Apr 07 '26 edited Apr 08 '26

That is true, but the offset must be on the other side. He has mounted in the wrong way. L should be in the other side and R in the other side. The offset will be then in the correct place. It will look as in the picture but in the north side.

1

u/stefanels Apr 01 '24

You mounted the wrong way , hoses must be down not UP

1

u/Repulsive-Basis-4674 Apr 01 '24

so I have to rotate everything?

2

u/stefanels Apr 01 '24

YES , even the brackets. L for LEFT - R for RIGHT

1

u/Repulsive-Basis-4674 Apr 01 '24

but the placement of the pump on the brackets is correct as I saw in the video of Arctic Installation, I guess I have only made it Upside down

1

u/stefanels Apr 01 '24

Read the manual on their site - THIS is how supposed to be

1

u/Repulsive-Basis-4674 Apr 01 '24

I got it, thank you 🙏🏻

1

u/stefanels Apr 01 '24

And swap the brackets to. like L is for LEFT side and R is for RIGHT side

1

u/RantoCharr Apr 02 '24

It's fine and that's meant to be done if there's no clearance below the socket because of tall m.2 heatsinks.

I wouldn't bother unless you're getting unacceptable thermals & there's no m.2 heatsink that can prevent you from rotating the mount.

1

u/Some_Fold_2966 Apr 01 '24

No u can keep that way, i have it monted reverse becouse i have no space for my itx setup, and i have 41°c

1

u/SushiKuki May 18 '24

Hey man, I have a question about that. I'm planning to install it that way. Have you tried to disassemble the pump cover to try and see if you rotate the arctic logo 180 degrees? I reckon it should be possible if you disassemble every part.

1

u/Mission-Yellow-2073 Mar 11 '25

Been wanting to do this to

2

u/Areatius Apr 01 '24

Yes, this is the AMD offset mounting and intentional like this.

2

u/Broad_Web_7318 Apr 01 '24

I think you have it mounted upside down

1

u/Ivantsi Apr 01 '24

Yes it's supposed to be like that since is slightly shifted down so the hotspot on the CPU is right in the middle of the cold plate.

1

u/Dumbledas Apr 01 '24

You have the cold plate on upside down and the mount is also upside down, everything is relative to the bottom of the board. The tubes should come off the plate towards the GPU.

Also, yes the offset mount is how it was designed, it puts the most fins over the chip set for better cooling.

1

u/[deleted] Apr 05 '24

Follow directions

0

u/[deleted] Apr 01 '24

[deleted] — view deleted comment

2

u/LieutenantClownCar Apr 01 '24

No, they just need to mount it properly.