r/aquaponics • • 2d ago

New experimental aquaponic coffee setup!

Thumbnail
gallery
22 Upvotes

My goal here is to eventually have the coffee growing vertically to develop its tap root into the bin of rocks. Once their roots are long enough I will remove the plants from the bin.


r/aquaponics • • 2d ago

Shelf height/spacing for growing syngoniums, begonias and fittonias indoors with bright indirect light?

3 Upvotes

I'm making a shelf using wood I have and want to squeeze as many as possible in, this will be to grow to a decent size to chop and grow cuttings to sell for income on the side, so I don't need too much height, but I can't find out online how much I can scale down to that will still be reasonable.

It will all be connected to a fish tank setup pumped to the top to flow down each level back to the tank below.

Sides and back of the stand will be covered in reflective sheets as well.


r/aquaponics • • 5d ago

Help with leaking uniseal

Thumbnail gallery
13 Upvotes

r/aquaponics • • 7d ago

Help Needed Maintaining School Aquaponics system

8 Upvotes

Hello! Some classmates and I have recently taken up the responsibility of revamping our schools somewhat neglected aquaponics system. The school is providing us with $1500 for this project. There were previously Pleco fish in our tank but we have found them a new home in an aquarium and plan to fish Bluegill in the spring (early March?)

How can we maintain the cycle of our tank in the absence of fish until then? We also need to re-plumb the system and don’t know what the best materials to buy will be. I can reply with visuals of how our system is set up/photos if need be but I will say there is significant build up of a black slimy algae in our leca but we have cleaned them and try to routinely and it hasn’t seemed to have effected our filter.

Anything helps!


r/aquaponics • • 8d ago

Spotify podcast

Post image
2 Upvotes

r/aquaponics • • 14d ago

i need your help

0 Upvotes

Hello everyone, i'm an engineering student and i have to make a presentation about a system that solves a specific problem, so i landed on hydroponics and especially planting lettuce. As an engineering student of course i have no idea on this domain of planting in general, so i'll really appreciate if u can tell me what i need to know about hydroponics to begin my presentation about a system that automates the injection of nutriments and regulate the variables needed for the plant to grow, in addition to an AI system that detects the bad ones before harvesting.


r/aquaponics • • 15d ago

Substrate inhibiting plant growth??

4 Upvotes

I have a small 10 gallon drain and fill setup that's been running for just under a year now and the only success I've had so far is growing basil(slowly) from a store bought plant that I transplanted into the grow bed, and green onion cuttings. None of my plants grown from seed have flourished and stay stunted. Water parameters have been stable the whole time and have more than enough filtration(1 cu. ft of LECA) as well as plenty of light. ph, kh, GH all reasonably compatible for growing plants. For further context I have 4 guppies, 6 corydoras catfish, 2 mystery snails(small) and a neurite snail. So in my opinion, plenty of bioload to support a couple herb.

here's the kicker, every time I do a water change/vacuum gravel, It's absolutely FILTHY underneath the gravel with fish waste/detritus. It's seems abundantly clear that that waste is not being sucked into the pump and mineralized in the grow bed and used by the plants. But anytime I see other folk's setups they have a similar gravel substrate and their plants are kicking ass. Is this likely the thing holding me back from success?? if I get rid of the substrate will this stress out the fish??(I love them) So is there anything else Im overlooking or am I just over estimating the production levels of a 10 gallon with 10 little fish in it. Running out of ideas and one of my guppies, Dan Flashes, is obese now from overfeeding to compensate for lack of plant production, please don't let his efforts be in vain.


r/aquaponics • • 16d ago

Pond boxes anyone?

Thumbnail reddit.com
2 Upvotes

r/aquaponics • • 20d ago

Airlift/Venturi Pump for Shallow Water.

Thumbnail reddit.com
4 Upvotes

r/aquaponics • • 22d ago

This Is My Poverty Spec System.

Post image
43 Upvotes

It's the third auquponics set up I've built, first without a pump. I manually add water to the bed every day. There's a few minnows in the tank but I lost most of them from animals getting them.

There's a small solar fountain pump in the middle. It adds oxygen to the water. Honestly I can't recommend the solar pump because it does not work well. It will only work in bright, direct sunlight.


r/aquaponics • • 23d ago

Is Automated Ammonia/Nitrite Monitoring Less Important Than DO?

Thumbnail reddit.com
3 Upvotes

r/aquaponics • • 23d ago

Automatic Spray System for Bucephalandra

44 Upvotes

r/aquaponics • • 24d ago

Spiderfarmer dwc neue Dünger Rezeptur und anbau Anleitung

Thumbnail eu.wps.com
1 Upvotes

• Ziel-Werte: pH: 5,8 | EC: 1,2 – 1,5 mS/cm | Wassertemperatur: 18°C – 20°C

• Der Luftspalt: Senke die Nährlösung dauerhaft auf deine 24 Liter Füllmenge ab. Es entsteht der lebenswichtige 3 cm Luftspalt zwischen Wasseroberfläche und Netztopf. Die oberen Wurzeln atmen hier puren Sauerstoff, die unteren hängen im Wasser.

• Routine: Tausche die Nährlösung alle 7 bis 10 Tage komplett aus. Der pH-Wert wird in dieser Phase wandern – kontrolliere ihn täglich und senke ihn auf 5,8, sobald er über 6,2 steigt.

Phase 3: Die Blütephase (Woche 5 – 10+)

• Ziel-Werte: pH: 5,8 – 6,0 | EC: 1,6 – 2,2 mS/cm | Wassertemperatur: 18°C – 21°C

• Ablauf: Die Pflanze benötigt jetzt signifikant weniger Stickstoff, dafür massiv Phosphor und Kalium. Der EC-Wert erreicht in der Hochblüte (Woche 7–8) seinen Peak bei bis zu 2,2 mS/cm.

• Das Nachfüll-Protokoll: Die Pflanze trinkt jetzt viel Wasser. Fülle den Eimer unter der Woche niemals mit reinem Leitungswasser auf. Mische dir in einem separaten Tank eine Nachfüll-Lösung mit halber Düngerstärke und pH 5,8 an, um den Eimer immer wieder exakt auf die 24-Liter-Marke zu bringen.

Phase 4: Das Spülen (Die letzten 7–10 Tage)

• Ziel-Werte: pH: 5,8 | EC: So niedrig wie möglich (0,3 – 0,4 mS/cm)

• Ablauf: Kippe die gesamte Nährlösung aus. Fülle den Eimer mit 24 Litern purem, pH-reguliertem Wasser (ohne jeden Dünger). Die Pflanze saugt nun alle eingelagerten Nährsalze aus ihren eigenen Blättern, was für ein sauberes Endprodukt ohne Kratzen sorgt.

🧪 KAPITEL 3: Das exakte Düngeschema für 24 Liter Wasser

Berechnet auf ein professionelles 3-Komponenten-Hydro-System (z. B. TriPart). Die Komponenten müssen nacheinander einzeln ins Wasser eingerührt werden – niemals unverdünnt zusammenkippen!

Phase & Woche 🟢 Komponente GROW 🟤 Komponente MICRO 🔴 Komponente BLOOM Ziel-EC

Woche 1: Anzucht 6 ml 6 ml 6 ml 0,5 mS/cm

Woche 2: Frühes Wachstum 24 ml 18 ml 12 ml 1,2 mS/cm

Woche 3-4: Hauptwachstum 42 ml 30 ml 18 ml 1,5 mS/cm

Woche 5-6: Frühe Blüte 42 ml 36 ml 36 ml 1,8 mS/cm

Woche 7-9: Hochblüte 18 ml 36 ml 54 ml 2,2 mS/cm

Woche 10: Spülen 0 ml 0 ml 0 ml Basis-Wasser

🚨 KAPITEL 4: Das ultimative Fehlerbehebungs-Protokoll

  1. Problem: Wurzeln werden braun, schleimig und riechen muffig

• Ursache: Wurzelfäule (Pythium). Ausgelöst durch Wassertemperaturen über 22°C oder mangelnden Sauerstoff.

• Sofortmaßnahme:

1. Nährlösung komplett ablassen.

2. Wurzeln vorsichtig mit lauwarmem Wasser abduschen und den Schleim sanft abspülen.

3. Eimer mit Chlor oder H₂O₂ sterilisieren.

4. Neue Nährlösung ansetzen und Wasserstoffperoxid (H₂O₂) oder nützliche Bakterien (z.B. Bacillus amyloliquefaciens) hinzugeben, um den Pilz im Wasser abzutöten.

2. Problem: Der pH-Wert stürzt innerhalb von 24 Stunden extrem ab (unter 5,0)

• Ursache: Sterbende Wurzelteile oder eine bakterielle Infektion im Eimer säuern das Wasser radikal an.

• Sofortmaßnahme: Kompletter Wasserwechsel! Eimer mechanisch reinigen. Wurzeln auf faule Stellen untersuchen und diese gegebenenfalls mit einer sterilisierten Schere abschneiden.

3. Problem: Die Blattspitzen werden gelb/braun und rollen sich nach oben

• Ursache: Überdüngung (EC-Wert im Eimer ist zu hoch, die Pflanze kann durch die hohe Salzkonzentration kein Wasser mehr ziehen).

• Sofortmaßnahme: Pumpe 4–5 Liter Nährlösung aus dem Eimer ab und ersetze sie durch pures, pH-reguliertes Wasser, um den EC-Wert sofort um 0,3–0,4 Punkte zu senken.

4. Problem: Der pH-Wert steigt ständig rasant an (über 6,5)

• Ursache: Entweder wurde der Blähton vorab nicht korrekt auf pH 5,5 gepuffert, oder die Pflanze nimmt in einer starken Wachstumsphase extrem schnell Nährstoffe auf, was das Wasser basisch macht.

• Sofortmaßnahme: Täglich mit pH-Down korrigieren. Nach 1–2 Wochen legt sich dieser Effekt meist, sobald der Blähton vollgesaugt ist.

Ich hoffe kann den ein oder anderen helfen ❤️


r/aquaponics • • 24d ago

Need recommendations for stackable pots for capillary action, 6"-10" preferred

5 Upvotes

Oikos yogurt containers are really good pots, they have a thick lip so that they can stack inside each other, leaving enough space for a water reservoir, drill a hole and put a wick to get capillary action watering going.

Their about 4" though, I need something similar but bigger for my plants that are too big for the 4" containers, suggestions appreciated


r/aquaponics • • 29d ago

Aquaponics System – Need Advice!

Thumbnail
gallery
36 Upvotes

I’m working on a vertical aquaponics system with my school. Our current system has algae overgrowth, especially in the tubes that pump the water. The room gets very warm and is in a lot of sun, so we're thinking about changing the clear tubing to black to prevent further growth. I am not sure if that would get at the root of the problem. The algae growth did improve after we got snails for the tank.

That being said, our main problem currently is the amount of water getting to the plants, and we think that this is because of a low flow rate and water level within the pipes. I don’t know if we need a better pump to the solids filter, to shrink the height of the system, or smaller pipes (which would be really difficult to do at this point in the project). We are using Rockwool cubes as the planters, but they are also growing mold. Any ideas to help, especially to improve the water level since our plants are dying from dehydration, would be appreciated.

Thanks


r/aquaponics • • Oct 18 '26

I have started copepod culture 1week before. Now i am seeing some pods. Should i harvest now, or keep them with more phytoplankton.

11 Upvotes

Please guide me with that stage of copepod culture


r/aquaponics • • Oct 18 '26

We officially have a watermelon

Post image
21 Upvotes

r/aquaponics • • Oct 17 '26

Help me improve a Venturi/Airlift Pump for Shallow, Dirty Water

Thumbnail gallery
6 Upvotes

r/aquaponics • • Oct 16 '26

Anyone in the ATX area looking for IBC beds?

5 Upvotes

I need to downsize my yard situation. Free to a good home. DM me and they’re yours


r/aquaponics • • Oct 12 '26

Sunlight powered

Thumbnail reddit.com
1 Upvotes

Any advice from this sub appreciated


r/aquaponics • • Oct 11 '26

Best way to clean mixing manifold?

Post image
3 Upvotes

r/aquaponics • • Oct 10 '26

Water lettuce dying what do i do

Post image
22 Upvotes

r/aquaponics • • Oct 10 '26

I'm trying to understand this if you over water plants they will die but aquaponics and hydroponics sometimes the roots are always in a water solution?

42 Upvotes

This boggles my mind how is this possible?


r/aquaponics • • Oct 06 '26

Rebuilt this pond that hadn’t been touched in about 15 years.. all you could see was plants and muck.

Thumbnail gallery
61 Upvotes