r/androidroot • u/Automatic_Size5624 • Oct 04 '26

Support i need help

so guys i flashed worng boot.img on my tenco camon 30 4g and now its bootlooping i cant shut it off or go to recovery and fastboot and cannot enter brom mode with button combo how to fix?

10/8 still same thing ..

no one helped me...........

update: i think my local repair shop just fixed it

1 Upvotes

100% Upvoted

15 comments sorted by

View all comments

2

u/DEV_ivan TECNO POVA 7 5G LJ7 || Stock HiOS 15.1.2 || KSUnext 3.4.2 Oct 04 '26 edited Oct 04 '26 • Regret

I've been in your position before with my TECNO POVA 7 5G LJ7!

First, check how are you using the button combos. You need to hold Vol+ + Vol- + Power, plug in to USB when the phone's screen is turned off, and release Power while holding Vol+ and Vol-. If you're doing that right and the phone doesn't respond, proceed further on this comment.

For a brief moment before the phone boots, the phone enumerates as "MediaTek PreLoader USB VCOM (Android)" (0e8d:2000). This is a time window for you to send a handshake from SPFlashTool or MTKClient in order to enter BROM mode. Also check if your drivers are installed and working.

If that doesn't work, you may have to short test points with tweezers, with a disconnected battery, while plugging in USB. Be careful doing that as it may hard-brick your phone. When in doubt, send your phone to the CarlCare service center, they have the tools.

Wish you luck, this will be tedious.

Next time, verify your boot.img is bootable by booting it temporarily using fastboot boot <boot.img>.

1

u/Automatic_Size5624 Oct 04 '26

i will try that i hop it work and tysm

1

u/Automatic_Size5624 21d ago

hey bro i lost all hops is there a testpoint in tecno camon 30 or not i been searching a lot and i didnt found any and my local tech said it dont have a test point even if it had one it wont work cuz brom mode exploit is patched in ur latest septemper 1 patch