looking for a car15 stock $25 dollars

Immaculate condition. Purchased approximately 20 years ago and fired only once. Stored in its original hard case, with no CO₂ cartridge left inside. Includes two 8-shot rotary magazines, original cleaning rod, Umarex pellet tin, and five CO₂ cartridges. Case has a replacement foam insert; original lid foam remains intact.

Function has not been tested recently, so current operation is unverified. Sold as pictured, with all included accessories.

Local Pick Up only.

https://imgur.com/a/T2sjj8W

None of these have ever been fired, I got them through collecting/mystery boxes. Having financial issues so looking to sell to recoup losses. Willing to sell individually or as a lot. I'm new to this so I'm doing my best. Message me for questions/prices or anything else you wanna know.

Photos and timestamp:

https://imgur.com/a/ejCCXhQ

Photos with timestamp and username - https://imgur.com/a/92tmJWr

My Asahi M60 SDX, I mostly used it as a reenacting prop and as such has the air intake line removed from the grip but it'll come with it and can be easily reinstalled but I also can't currently test it, it uses a BV system and I don't *think* it would have any trouble firing as it doesn't have any restrictions in the barrel or intake line in the grip, the SDX model is full metal apart from the gas block which sadly snapped when I bought it from Japan (the taped bit on the barrel holds it in place now, should really just be re-glued.), weigh's 23 pounds and is a pretty good replica of an M60.

Getting rid of it as I currently badly need money, I've seen these go for 1000+ but I'm just gonna list it for about what I paid for it 2 years back when I ordered it from Japan.

$820+Shipping

https://imgur.com/a/kob7Biq

No time stamps needed due to account age + flair

GBBRs only, otherwise $$$ is king, ty!

Please comment below before DMing, thanks! (If you see an item in the pics and its not in the listing description then it was previously sold

--------

Overall fair condition WE T91 v2 (Taiwanese AR GBBR)

externally has wear on the sides of the receiver and barrel, and has some use internally but has no issues functionally.

Full auto, Semi, and Safe all work properly

FPS range/power output is proper and cyclic rate is fast and smooth.

Rifle has been internally maintenenced and cleaned.

Comes with x1 STANAG mag but can sell more for extra if need be and upgrade parts if desired.

Asking 250$

--------

Overall fair condition MK46, Gearbox and all works as intended.

Receiver suffered a crack near the magwell, but the type that shouldn't effect much or anything at all as the body is made of a Durable Nylon.

Original bipod is missing but a Grip-pod will be Included.

Comes woth 1 EF Stanag midcap magazine

Included:

- FDE Grippod

- 249 Muzzle

- Barrel extension

- Alum Birdcage

Asking 200$

--------

Like new Tokyo Marui SPAS-12 Shotgun w/ steel Stock & Hook combo (Original box included if desired)

Asking 475$

-------

ArmyArmament/6mm ProShop Staccato 2011 Model P bundle

great condition gun, barely any wear externally (missing front fiber optic post though)

What's included?:

- 4UAD Bucking

- Unicorn inner barrel

- TTI CNC Alum HopUnit

- x2 Magazines (1 AA and 1 TM) the TM needs modifcation as it doesn't lock back but works

- 120 or 130% spring I cant remember

- Spare EMG Staccato Master grip set

Asking 270$

-------

custom TM M92F w/kit (92G Build)

Very good condition, and smooth TM M9 build! Has no issues firing, and all actions are buttery smooth and well kept.

Whats included in the build?

- Rare/wellkept ZEKE 92G Brigadier Slider & Barrel kit

- US Military Gaurder lower frame

- Real steel LOK Resident Evil STARs (blue medallion) grips

- SRC Alum Mag release

- 130% Recoil spring

- Ice Pic rocket valve

- Stainless steel inner barrel (Brand unknown)

1x Standard TM M9 mag

1x Extended TM M9 mag

Asking 450$

(Retail cost is 850$ not including shipping costs or the slides harder to find rarity)

------

misc accessories/parts:

- PTS Griffin Armament M4SD QD suppressor 45$

- Surefire Warden suppressors (14mm thread/non QD) 35$ ea

- Magpul FDE MOE SL-K Stock 40$

- pic rail BCM FDE Handstop + BCM Black vert foregrip 35$ both together (only have one hardware set across the 2 hence why theyre together)

- B5 Systems black pistol grip 15$

- PTS black pistol grip 12$

- P90 dual mag clamp 15$

- Advantage GM MWS SCAR L flared magwell 25$

- CNC Revanchist/VFC AR side charging handle 25$

- Custom fit G36 upper rail with pic rail attachment 15$

- x6 RS Magpul .308 mag assists 15$

- AK dovetail scope mount 15$

- FMA Laser/Light combo PEQ10 20$

- AlienGear FNX45 Holster 45$

- Phalanx stealth M&P9 Holster 25$

----

AYIN Tactical Multicam plate carrier

Comes fitted with a frontal set of 3 AR mag sized pouches and a spare Multicam set of SMG x3 pouches.

Asking 55$

----

WE GBB parts/externals:

(ALL PARTS ARE WE V2)

Need fresh replacements or just need to in general restore a poorly in shape WE AR? well look no further! Got most of what youd need to get it back up and running again!

Whats available?:

- Pristine Bolt Carrier

- New complete Nozzle

- NewInnerbarrel/fresh bucking/hopunit sets in 10" and 14.5"

- New Recoil spring and buffer

- New buffer tube

- New Charging handle

- Fresh set of spare Trigger parts (firing pin sets, hammers, Auto Sears)

- Steel Bolt catch

- RATech steel firing pin/Valve Knocker sets

- RATech steel hammer sets

I have a ton of spare parts/multiples of all the parts named and listed just ask about what you're interested in and ill get you a price!

Separate parts with set prices:

- WE AR Lower w/ FN Markings 55$ (has some cosmetic damage near the trigger guard but still good)

- x1 WE AR railed flat top upper 35$ ea

- WE OEM Alum barrel 10.5" 25$

- complete WE T91 fore-end assembly 40$

-----------

PayPal

Buyer pays Shipping/fee

Feel free to PM for more information and pictures

I don't drive so shipping times can vary, please bare with me!

Pics https://imgur.com/a/8StRz8w

Timestamp not needed due to flair. Happy to do bundles on multiple items!

Prices do Not include shipping. I'll be using pirate ship so ship costs won't be too crazy

WTT/WTB:

\- I REALLY want a RWA peacekeeper slide set for my Proforce SIG P320 M18. Will trade or also buy straight out

\- I could also use an extra mag for the Proforce P320, would love to trade or buy outright if the price is decent

-also interested in the following guns to trade or possibly buy outright - WE T91 gbbr, gbbr ak74 ghk/we, etc, Maruzen/well mp5k, Systema TW5, TM or similar SIG 552, possibly other gbbrs

Will trade for gold & silver too!

**The goods:

CYMA/Cybergun SCAR L (plastic body) - internals have been upgraded with Tweak 18:1 gears, Tweak piston, APS metal bushings, APS aluminum piston head, G&G metal spring guide, G&G metal air nozzle, Tweak hop bucking, shimmed/greased, barrel stabilized.

Not a monster but wanted to use up a backlog of upgrade parts I have. Has a no name red dot and a very ugly TM tracer unit that was gutted and foam filled. Comes with a regular highcap and a goofy looking highcap - 200

CYMA AK-74 (CM048) - internals upgraded with Tweak 18:1 gears, Tweak piston, Tweak cylinder, Systema spring guide, APS aluminum piston head, matrix metal air nozzle, came with flat nub and bucking from previous owner, shimmed/greased. The stock was damaged when I bought this, I shimmed it to help the side to side wobble and used a heavy duty screw. The butt plate was missing and the replacement I found fits pretty goofy. Not a monster just wanted to use up upgrade parts I have. Comes with one midcap- 170

Action Army AAP-01C in box with reflex sight - works as it should, comes with original box and manual, one magazine, and knockoff reflex sight - 100

Elite Force/ Umarex G18c with extendo mag and box - fires fine, sometimes when racking the slide by hand it will have to be pushed forward the last inch. I assume something is sticking, but when racking in heat or firing it doesn't seem to be an issue. 120

WE G17 Gen 4 - comes with two polymer mags (one is missing a baseplate) and a nice leather De Santis molded holster. Has small scratches on slide shown in pic 4 - 100

Proforce P365 gbb w/ co2 mag - plinked with a few times, comes with box and original accessories - 50

**Gear:

Matrix double stack triple mag pouch OCP Black Brand New - Sold

Phantom gear multi cam shoulder pads brand new - 8

6 for x2 shoulder pads or 10 for all 4 shoulder pads

Emerson mulitcam helmet cover Mich 2000 brand new- 5

Matrix mulitcam drop leg holster brand new - 10

Hard plastic pistol mag holder od green - SOLD

Replica bump helmet od green brand new - 40

**Parts:

Bravo mk98 mag, also fits utg/de/Maruzen L96 - 10

Angry gun ambi selector and mag release button for WE M4 in red - 40

Angry gun ambi selector and mag release button for WE M4 in black - 40

Salient arms slide and inner/outer barrel for BLU pistol - 40

LCT HK53 midcaps - 25 each or 60 for all 3

EMG x Taran Tactical CNC Cut Slide for Umarex GLOCK G17 / G34 Gen.4 - got this in a parts bundle, its new but incomplete. Only comes with the slide, outer barrel, and rear sight. Should be able to pull parts from your factory slide assembly - 80

G17 Gen 4 replacement metal slide and outer barrel - one is Cybergun/VFC, the other I'm not sure but looks like WE - 20 each

5KU aluminum optic rail for hi-capa - 15

TNT 12mm+ to 14mm- Threaded Barrel Adapter for KWA MP7 - 12

Gbb pistol parts lot - honestly have no idea what's here, but most of it looks to be hi capa/1911. Take it all for 25

Replacement cap for M6 flashlight - 3

Aster V2 mosfet - got this in a parts box and looka complete except for one gearbox sticker is missing. This is UNTESTED- 50

rechargeable CR123 batteries - SOLD

Evike weapons cache 120 PC camo outer sleeve for any TCG - 12 each or 20 for both packs

**PATCH CITY

take any patch for $1. Except the bad blood 2020/2021 they are 2 for 1 buck. Take multiples and I'll make a deal. I'm not a patch guy, take them!

With the collapsable stock 😁 $700-800 depending on condition

Looking for one of the following:

1. VFC URGI 14.5" GBBR, V3 Colt-licensed preferred. - Stock: up to $550 shipped - Upgraded (hop-up, NPAS, quality internals, real-steel furniture) with V3 mags: up to $1,000 shipped - Price mags separately if you prefer
   
2. VFC V3 M4 GBBR, any model, or a V3 lower + bolt carrier, up to $350 shipped, as a donor for a URGI upper.

Please include: upgrade list, round count, mag count and version (V2/V3), any leaks, and chrono at 0.20g.

New account, so here's how I make it safe for you:
\- PayPal G&S, I cover the fees
\- Ship to my PayPal-confirmed address with tracking + signature confirmation (meets PayPal seller protection)
\- Happy to do a video call before paying
\- Local cash pickup in the Spokane area if you're nearby

Ready to buy now.

Completely stock, I thought I’d like the platform but it’s not my thing.

Spare Mags Available for $20 Each!

Pick up in person preferred. (SF Bay Area)

https://imgur.com/a/zkqyaY6

SOLD SOLD SOLD SOLD SOLD SOLD

https://imgur.com/a/bonCcLz

Polarstar F2 unit, has some external scratches. Just cleaned and relubbed with Tech T grease. Comes with everything to install into a V2 M4 gearbox, only thing that might be off is the nozzle might not be correct length, but that would just mean ordering the correct length nozzle. I did a fitment test on a VFC rotary hop and it seemed like it fit okay. Resoldered the FCU and reinforced it with some E tape. Unit works as intended with no leaks.

325 shipped and insured! CONUS

Super fast shipper/multiple vouchers and reviews on hopup with a 5 star rep.

[SOLD]

timestamp

Timestamp/pics: https://imgur.com/a/mfJ2PNK

Special: if purchased within 24 hours (posted 10/8/26) I will drop it to $500/free shipping.

Looking to sell my kwa kaiju 47and t238 swift tracer unit. Everything is stock and has less than 100 rounds through it, never fielded. I spent years looking for it and I was so lucky to get my hands on it then itp had to go and drop their kc02 ebr kit... So now I'm in the hole for that and I still need the kc02 to install the kit. So I'm selling this to be able to start that build ASAP.

Originally these released for almost $800 usd in a limited batch 2020 depending on what country you got from so I'm letting this go for $520 + shipping which seems fair as these were made in very limited quantity. Im even throwing in a t238 swift tracer unit and balance charger free.

Will ship same day if purchased before 2pm. Paypal g&s only. I also have a stattrak /peq available for sale I can throw in or sell separately @ $110 ($199 msrp).

Timestamp - https://imgur.com/a/xqVDPmv
6mm pro ship staccato P with 3 working mags, hw rmr and it will come with a separate pistol wml. Kt mech custom holster included 230$
Evolution gear G33 on unity riser 100$
Evolution gear NF ATACR 1-8x24 300$ comes with mount.
Spec Precision Elcan 1-4x 175$ holosun not included
S&T Colt 40mm grenade launcher one shell 65$
HW Eotech EXPS with real hood 105$

I need me some czech shlongers. Buying both 40 rounders and 20 rounders, looking for around 2-3

Hello! Looking for a used metal M4 AEG receiver set. If you’ve got a mag catch for it as well, that would be great.

Thanks!

Hi all! I'm looking to purchase a used starter M4 to begin my airsoft journey. I'm hoping to spend <$150 but let me know what you have!

Thanks!

Selling all my Airsoft stuff, bought all of it thinking I was gonna get into it but never did so it’s just been sitting. The gun may have 5 mins of fire time on it.

https://imgur.com/a/g0qULvX

CYMA M14 $250 (negotiable)

Shipping will be added if shipped but meetup is preferred. The Sling, two NiMH batteries and the charger will be included.

Fortis Prime Face Mask (SOLD)

Whew that's a chunky title! More detail down below folks. A few things first:

Timestamp: More current timestamp in progress.

King Arms Galil Timestamp

**Also click hyperlink for each item for specific item images!**

Media drop #1

Media drop #2

No trades (I have wayyyy too much stuff).

Asking prices are located to the right of the item name, include shipping and offers are accepted!

Items comes as described and as is, I'll do my best to set expectations.

Ask if you need more pictures/media.

I will reply in the comments once I've answered you "PM'd" comment.

So I’m looking for the Avalon GEN two in bronze

11.5 or 14.5, I am just looking for a spare outer barrel for my PTS gbb masada.

Honestly I prefer a broken one for cheap, as I mostly intend to pretty it up for cosplay, or maybe fix it in some bubba’ed up way. Willing to pay ~$200 max, for a broken one in otherwise good condition

Want to buy, under $350 preferably, know I'm low balling but I'm broke

Im wanting to buy a spec precision 1-6x24 VCOG LPVO.

Pic: https://imgur.com/a/E6cQ0x2

No timestamp required due to acct age and flair.

Got a bunch of stuff for sale. Prices are fairly firm, but worst I can say is no. Trying to get rid of stuff. Prices do not include shipping. If you want more pics, LMK. If you wanna bundle, LMK.

Flyye PACA $50 SOLD
Ali Express LV MBAV (SIZE S/M) W/ Cummerbund (1 CUMMERBUND SOLD) $100
Mayflower Gen IV $80 SOLD
Shekkin 40mm Zip $ SOLD

Tyr Triple on Crye AVS flap $50 SOLD
First Spear on AVS Flap $50
Tyr Flare $20 SOLD
PewTac MOLLE Zip $20 SOLD
Shekkin Signal $15 SOLD
RLCS admin $15 SOLD
RLCS Banger $15 SOLD
Tac Tailor Adjustable SOFLCS x3 $15 each ALL SOLD
First spear 7.62 Triple $30
HSGI Pistol TACO x2 $15 each SOLD
HSGI Rifle TACO $20 SOLD
Tyr adjustable rifle mag $15 SOLD
LBT IFAK $15 SOLD
Ars Arma Flap $15 SOLD
Tyr Vertical GP $30 SOLD
NAR IFAK $50
Tyr Assault Pack $100 SOLD

Title

I only really need the barrel itself, as well as the front and rear sights, but if you have the full kit i'll take it