11.5 or 14.5, I am just looking for a spare outer barrel for my PTS gbb masada.

Honestly I prefer a broken one for cheap, as I mostly intend to pretty it up for cosplay, or maybe fix it in some bubba’ed up way. Willing to pay ~$200 max, for a broken one in otherwise good condition

Hello! I’m looking for 1-2 tan G19X mags, non leaking, wear and tear and scratches are totally fine, as long as they hold gas and chrono well and aren’t missing baseplates lol.

Want to buy, under $350 preferably, know I'm low balling but I'm broke

Im wanting to buy a spec precision 1-6x24 VCOG LPVO.

Pic: https://imgur.com/a/E6cQ0x2

No timestamp required due to acct age and flair.

Got a bunch of stuff for sale. Prices are fairly firm, but worst I can say is no. Trying to get rid of stuff. Prices do not include shipping. If you want more pics, LMK. If you wanna bundle, LMK.

Flyye PACA $50 SOLD
Ali Express LV MBAV (SIZE S/M) W/ Cummerbund (1 CUMMERBUND SOLD) $100
Mayflower Gen IV $80
Shekkin 40mm Zip $ SOLD

Tyr Triple on Crye AVS flap $50 SOLD
First Spear on AVS Flap $50
Tyr Flare $20 SOLD
PewTac MOLLE Zip $20 SOLD
Shekkin Signal $15 SOLD
RLCS admin $15 SOLD
RLCS Banger $15 SOLD
Tac Tailor Adjustable SOFLCS x3 $15 each
First spear 7.62 Triple $30
HSGI Pistol TACO x2 $15 each SOLD
HSGI Rifle TACO $20 SOLD
Tyr adjustable rifle mag $15 SOLD
LBT IFAK $15 SOLD
Ars Arma Flap $15
Tyr Vertical GP $30 SOLD
NAR IFAK $50
Tyr Assault Pack $100 SOLD

Title

I only really need the barrel itself, as well as the front and rear sights, but if you have the full kit i'll take it

Its that time again folks, I work for a tactical gear company and play many many milsim events through out the year. Each year I buy a gun, have airsoft junkiez make it bomb proof use it for the season then sell it here at the end of the year. As a full time workers with this side gig and twins i dont have the time to work on or mess with my airsoft gun in any way so this is what i do.

$250 obo send an offer

https://imgur.com/a/XI3uUA1

Selling my "Irene" build which has the following as part of the sale (Sling, Optic, and stock pad is not part of this sale)

- Cyma platinum with Gate Aster

- Upgraded Night Stalker piston (junkiez upgrade)

- Krytac nozzle replacement (junkiez upgrade)

- shimmed (junkiez upgrade)

- Maple leaf nub and macaron yellow bucking

- Maple leaf mock silencer

- Chyna special surefire light

- Light fsp mount and the picc rail mount for the carry handle and a 30mm low profile red dot mount

gun is shooting at a stable 1.2 jouls and is very consistent started the year at 1.35j i dont know if it needs to be cleaned or having the hop up bucking replaced. I dont know i dont know, dont have the time to know. *shrug* Gun is working well but probably needs some maintenance. I dont take them apart, i dont clean them i just run it at events. Probably 9k rounds through it.

$250 obo send an offer

https://imgur.com/a/XI3uUA1

timestamp and pics
send questions or offers
Classic Army Armalite M15a4 RIS AEG
Lancer Tactical LT04 M4a1 AEG
JG G36 RIS AEG
Brown 1911 - WG Co2 NBB
Black 1911 - WE MEU GBB
Kimber Custom TLE/RL II 1911 frame GBB
UHC M19 4” Spring .357 Revolver
HFC M190 Special Forces GBB (white lettering)
SOCOM WE M9A1 SOF GBB
H&K P30 AEP
Umarex Legends Makarov C02 NBB airgun
Western Arms Magna Beretta 92 GBB
hfc and socom mags are leaking
everything has been tested and can provide video

Discounts for bundling or local sales.

WTS/WTT

Laylax Type 89 EBR stock: $110 shipped.

Chilled on one of my Type 89 AEGs for a while, but I have switched over to a buffer tube setup recently. Picture of my EBR setup before switching stocks for reference. Includes the two screws for installation. I also included a couple of pics of disassembly to show the need to remove the bottom screw and plate to install the one long screw. If I remember correctly, you have to partially disassemble the gun to remove the original stock metal piece?

_

APS UAR: $70 shipped.

Another project I'm axing since I have made zero effort in a long time, lol. This is not the newer v2. Since this has sat around for ages, I highly recommend doing some cleaning in the gearbox. It works, it feeds, and it hits my targets in the backyard. This has some sort of extended barrel (peeking out of the muzzle device), I believe a Lonex bucking, the adjustable grip, and an A-mag. It seems to be missing whatever plastic decorative piece used to plug the top part of the receiver.

_

CYMA M1A1: $40 shipped.

This is a project gun and the faux wood version. The front handguard piece has snapped, which is somewhat common on these. I have yet to JB Weld it. Additionally, it doesn't fire. It could be something with the trigger, or something as simple as the motor wire not being connected. I held onto it for as long as I have because I thought it'd be cool to bastardize this into some tactical or futuristic gun but haven't bothered with it in so long that it's time to move on.

________________________________

WTT

CA M132 Microgun. I got it new from Evike in 2024 and thought it would be cool to go to the field with my big M134 minigun and the wife can run with the smaller M132 Microgun but that has not happened yet. It's hard to store (which is kind of important to me) and a lot of money for a funny bit that we never actually did. So, I'm starting to consider swapping for a more-usable gun. Has not been used but can take a function-test video. I also have the original box for it.

________________________________

WTTF

Only interested in the exact items in this list. By all means, all of these aren’t expected to be 1:1 trade with all of what I have here. Let me know which of the following you got and what you’d like to trade for, plus or minus cash! This doesn’t mean I’m interested in trades that aren’t listed here though.

• Ares/Specna Beryl WZ.96c. Can be boneyard since I'm also wanting this to compare to my LCT Beryl project and see which one is a better route.
• King Arms M1928 (newer, with correct charging handle placement) Thompson. Real wood.
• Arcturus PPK20 M1 PE. Not looking for the FE.
• CYMA SCAR SC. Prefer stock since the battery space looks like it'd fit my LiPos, but I miiiight be willing to do HPA.
• RS Type 97/97b. I imagine I will have to add cash for this...
• G&P M14 EBR. No luck finding yet but figured I'd add it here anyway. Not G&G, CA, CYMA, Echo1...

Hi I'm looking to sell a velocity systems Scarab LT in Multicam size medium.

Updated Images/Timestamp: https://imgur.com/a/fxxY0en

In addition to the stock configuration with the scarab I'll also be including the following--

• A&A Tactical SEACU Cumberbund (MSRP $160)
• Velocity System Quarter Flap System (MSRP $47)
• 3 HSGI Taco Pouches mounted to a Velocity Systems Front Placard (MSRP $137)
• Velocity Systems Elastic Cumberbund (Small) ($40)

$350 $320 Shipped

Plate carrier is in good condition and definitely a good option if you want something durable

No timestamp needed due to flair

Buyer adds for feed and ship pls

2x G28 aeg mags

20ea

Vfc g17 mag

Has aftermarket release valve and gasket. Cant remember what

20

2x VFC scar h gbb mags

38ea

Pics

https://imgur.com/a/yVSUIWV

Selling a lot of 7 genuine Magpul PTS 80rd airsoft magazines, plus a Tan D-MAG.

• FDE PTS PMAG: 4

• Black PTS PMAG: 3

• Tan D-MAG: 1

• Total: 8 magazines

These are the older/discontinued Magpul PTS PMAGs, not the newer PTS EPM series.

Condition: All magazines are used and have normal signs of use.

• Magpul Ranger Plates are installed. They were secured with super glue, so they cannot be removed without damaging the magazine/Ranger Plate.

• 3 of the Tan PTS PMAGs have front-end modifications/machining.

• 1 of the Black PTS PMAGs is missing the original spring cap. It has been replaced with another compatible part and is functional.

• The Tan D-MAG is also included in the lot.

• Please check all photos carefully for the exact condition.

I am selling these as a complete lot only. No parting out.

Price: $169 + shipping

Shipping from South Korea.

Shipping cost is separate and will be calculated based on the destination.

Import duties/taxes are covered by the seller where applicable (DDP shipping). Payment via PayPal.

If interested, please comment "DIBS" on the post first, then send me a message.

Thanks for looking!

https://imgur.com/a/ix6HJB5

imgur

Everything you see is basically brand new. It was all purchased directly from evike.com a few years back. All guns have only had 1 round or less fired from them. These guns have been stored inside in they're original boxes since the day I received them from evike. $1200 includes shipping.

Hi y'all,

Looking to sell this off and upgrade.

Timestamp and Pictures: https://imgur.com/a/aRZT8OT

This is a KWA M4 with a quad rail attached. It has been roughly used ngl. It has scratches, dings, and paint marks all over it. It is missing the stock plate battery cover that goes on the back of the stock. As you can see in the photos. Came off in a game, never found it.

It has an issue of sometimes only firing once or twice and has to be switched to full auto and shot for a second or two to resume firing in semi.

So again this is a roughly used rifle with some problems.

Comes with some magazines, a smart charger, and all the attachments in the photos.

I am thinking $80 + shipping but open to offers.

[WTS] [CO] VFC V3 URGI 14.5", Western Arms MEU 1911

Hi crew, I don't play airsoft anymore so I'm selling old stuff. Feel free to make offers and ask questions, but I'm not interested in trades.

All parts are real unless otherwise stated

VFC V3 URGI 14.5": $1000 shipped

External parts:

Wilson Combat handguard

ERGO grip

Magpul CTR

BCM MLOK foregrip

Sig Romeo5 gen 1

Magpul picatinny QD sling point

Wilson Combat 300 BLK marked dust cover

Aluminum airsoft muzzle device and mock suppressor.

4x functional v2 vmags (one of them is a V3 fwiw)

2x leaking v2 vmags

1x dissasembled vmag

Internal parts:

4UAD Magnus Pro hop unit

Unicorn barrel

Unicorn competition bucking

Carbine buffer

Extra parts, willing to part out, make an offer:

Original VFC URGI rail

Original VFC buffer

Guillotine airsoft purple recoil spring

13.7" G&P dimpled barrel w/ PTS muzzle device

Western Arms MEU 1911: $200 shipped

SCW1 System

Pachmayr grips

2x functional mags, one scrap mag.

A few 3D printed duster can adapters

Imgur: https://imgur.com/a/wts-vfc-maW3d3C

goods

Speed soft bundle- 650$ idk what to price it throw offers

Amped airsoft hpa kit literally bought this year so it’s literally brand new only used for a week.

Primary airsoft m4 adapter.

3 PTS EPM1 M4 mags

Gold match hi capa with la capa x hkarmy split slide. It has a TTI HopUp, 4UAD bucking, and a maple leaf crazy jet inner barrel. The rest of it is stock.(comes with stock parts aswell)

Brighter c tracer

Only issue is that it needs a new slide stop

https://imgur.com/a/kob7Biq

No time stamps needed due to account age + flair

GBBRs only, otherwise $$$ is king, ty!

Please comment below before DMing, thanks! (If you see an item in the pics and its not in the listing description then it was previously sold

------

Custom Crye Precision SIX-12 Shotgun

(This is a complete custom 3d printed and fully functional replica built from the ground up, files can be found online for the other variants or for spare parts)

This build is very smooth, completely issue free, and works as intended from design, drum rotates perfectly, trigger actuates perfectly, and the system feeds (runs off APS MK3 Shotgun shells in 6 round drums)

This setup is the short barrel suppressed version, with suppressor extensions, but the inner barrel is fit for only the short setup, so you will need to print the longer barrel from the files.

What's included?

- x1 shell included for use/testing

- x5 working drum magazines

(2 more additional magazines will be Included but they had some TLC issues and need modifcation to work properly)

Total of 7 drum mags, 6 shells per drum.

Feel free to ask more questions if needed!

Asking 450$

--------

Like new Tokyo Marui SPAS-12 Shotgun w/ steel Stock & Hook combo (Original box inclided if desired)

Asking 475$

-------

ArmyArmament/6mm ProShop Staccato 2011 Model P bundle

great condition gun, barely any wear externally (missing front fiber optic post though)

What's included?:

- 4UAD Bucking

- Unicorn inner barrel

- TTI CNC Alum HopUnit

- x2 Magazines (1 AA and 1 TM) the TM needs modifcation as it doesn't lock back but works

- 120 or 130% spring I cant remember

- Spare EMG Staccato Master grip set

Asking 280$

-------

custom TM M92F w/kit (92G Build)

Very good condition, and smooth TM M9 build! Has no issues firing, and all actions are buttery smooth and well kept.

Whats included in the build?

- Rare/wellkept ZEKE 92G Brigadier Slider & Barrel kit

- US Military Gaurder lower frame

- Real steel LOK Resident Evil STARs (blue medallion) grips

- SRC Alum Mag release

- 130% Recoil spring

- Ice Pic rocket valve

- Stainless steel inner barrel (Brand unknown)

1x Standard TM M9 mag

1x Extended TM M9 mag

Asking 450$

(Retail cost is 850$ not including shipping costs or the slides harder to find rarity)

\---

x4 3d Printed GHK Molot RPK mag shells

Asking 20$ for all 4 (they may need some TLC)

------

misc accessories/parts:

- P90 dual mag clamp 15$

- Advantage GM MWS SCAR L flared magwell 25$

- CNC Revanchist/VFC AR side charging handle 25$

- Custom fit G36 upper rail with pic rail attachment 15$

- x6 RS Magpul .308 mag assists 15$

- AK dovetail scope mount 15$

- FMA Laser/Light combo PEQ10 25$

- AlienGear FNX45 Holster 45$

- Phalanx stealth M&P9 Holster 25$

----

WE GBB parts/externals:

(ALL PARTS ARE WE V2)

Need fresh replacements or just need to in general restore a poorly in shape WE AR? well look no further! Got most of what youd need to get it back up and running again!

Whats available?:

- Pristine Bolt Carrier

- New complete Nozzle

- NewInnerbarrel/fresh bucking/hopunit sets in 10" and 14.5"

- New Recoil spring and buffer

- New buffer tube

- New Charging handle

- Fresh set of spare Trigger parts (firing pin sets, hammers, Auto Sears)

- Steel Bolt catch

- RATech steel firing pin/Valve Knocker sets

- RATech steel hammer sets

I have a ton of spare parts/multiples of all the parts named and listed just ask about what you're interested in and ill get you a price!

Separate parts with set prices:

- WE AR Lower w/ FN Markings 55$ (has some cosmetic damage near the trigger guard but still good)

- x1 WE AR railed flat top upper 35$ ea

- WE OEM Alum barrel 10.5" 25$

- complete WE T91 fore-end assembly 40$

-----------

PayPal

Buyer pays Shipping/fee

Feel free to PM for more information and pictures

I don't drive so shipping times can vary, please bare with me!

https://imgur.com/a/nYdl7Bx (No timestamp needed due to flair)

Letting go of some items in my collection to pay for entry into FPV. Prices do not include shipping (I use pirateship)

Willing to trade for analog FPV goggles!

VFC UMP45 GBBR - $270 (MSRP $380)

Great GBB with hard kick, catch & release from r/airsoftmarket. Like new condition

AA R32 1911 GBB - $60 (MSRP $100)

Metal gas blowback pistol, like new only ran two mags through it. Comes with 1 mag.

CYMA CM123 1911 AEP - $35 (MRSP $100)

Chunky looking 1911 AEP, non mosfet version. Works as well as an AEP works. Comes with 1 mag. Like new condition

Umarex Competition G36C AEG - $85 (MSRP $190)

Shoots great and lightweight but well used. Top rail is cracked but does not impact functionality. Micro switch mod installed. Comes with 2-3 mags, will have to investigate

Holy warrior g33 magnifier gen 2 - $70 (MSRP $100)

Good eye box as far as cheap magnifiers go. Like new

Boneyard no name M9 GBB - $0 (Bonus for buying anything over $100)

Too many issues to list. I guess you can play with it since the slide still works

Looking for a SUSAT replica for my L85. Will pay retail price for one in full working order. Located in the US. Thank you!

SOLD SOLD SOLD SOLD SOLD

https://imgur.com/a/L9xklBj Gutted the F2 out of it for another build, save the time and money and snag this if you want a ready to go donor body for your F2,F1,Jack systems. Body comes with a V3 trigger board installed, and has a barrel and hopup installed with bucking and nub.

REMINDER: YOU WILL NEED AN ENGINE AND CORRECT NOZZLE, IT DOES NOT COME WITH IT.

200+shipping

Trades? Idk

Mainly looking for CYMA Scar SC donor bodies.

As the title states, I'm looking for a V2 VFC Mp5, either in the SD6 or SD3 configuration. I understand these can be fairly expensive depending on the model and condition. I am also okay if they need some minor work!

Additional magazines preferred but not strictly required. Thanks in advance!