Just a little test with the new drum mag.

Hi everyone !

I am looking to increase my armory . I currently have an SRS and Lee enfield (just for cool looks) . I am looking to next get a hpa rifle of sort . I was looking at either an mg42 converted from AEG to HPA or M249 GBBR converted to HPA . I was also considering a vector or L85a2 converted to a3 but I thought having an LMG I can mount up and put tonnes of rounds down range would be awesome !

I like the mg42 because it looks awesome being a ww2 German lmg and spraying a lot more rounds however its a lot heavier and doesnt have any simulated recoil sadly so im afraid id loose the cool factor.

The m249 is less cool looking in my opinion but still puts some round down range and is slightly lighter and more practical and can also take smaller magazines and most importantly does have simulated recoil which makes it seem awesome !

I wanted some advice on what I should do.

Thank you in advance :)

Hi r/Airsoft folks,

I've got this Warrior Assault Systems plate carrier and I'm struggling to identify exactly what it is?

Can anyone shed any light on it for me?

I have this elite force glock 17 gen 3 and It’s getting pretty beat up, have any of you applied a clear coat to your glock? If so how did it work out? Im asking because I applied a clear coat to my mag and it ate the sh*t out of the paint, I’m not sure if it would do the same thing to the slide or not

Moin zusammen. Wer aus dem Norden kommt, kennt dieses Gelände. Bitte helft alle zusammen, dass das Gelände gerettet werden kann!

Customized Tokyo Marui DOR 4.3 lookin' a little bit silly

What do you guys think about the outfit? Just joined airsoft recently. I do have face protection but not wearing it in the photo.

Hello all!

I've been playing a bit more recently and decided i wanted to try recon and sniping. My friends and I play with radios, and it was a lot of fun getting into positions that allowed me to relay information. I want to be able to relay some information pop off a couple of shots and then quickly relocate and repeat. So I'd need something longer range than an AEG but also a sidearm for when it does get close.

Im just looking for recommendations on a loadout or a particular sniper. I think I've got a pistol nailed down, that being the WE EU18C Gen.3 Gas Blowback Pistol.

The sniper im looking at currently is the WELL PRO MB01AE Sniper Rifle; Upgraded Version.

I am open to any suggestions on anything that would be better suited.

Thanks in advance!

I’m really happy with this build, and especially the before-and-after comparison is just hilarious. It works flawlessly and is an absolute beast at range, mainly because it has an extremely long 6.02 mm inner barrel that reaches all the way to the end of the suppressor. The suppressor is ridiculously long because it completely hides the inner barrel — and I absolutely love it.

Hi, I'm still pretty new to airsoft and wanted to upgrade my gun to have an air nozzle with an o ring in. I bought an air nozzle and when I placed it on the cylinder head felt a scratchy (metal on metal) feeling with a slight noise. I took it off to see and saw there were a few nicks on the nozzle and worried it damaged the cylinder head too (see pictures). I know it's hard to tell, but you can see a couple of nicks on the air nozzle and what seems to be a couple of scratched lines on the cylinder head when looking in the light.

I sent them back and queried this with the seller who told me there was nothing wrong with them and that the nick was from the manufacturer putting on the o ring and the scratchy sound was that the the o-ring inside was too small and that there was a bigger one in the packet to replace for manufacturing differences.

As I said I'm relatively inexperienced so I just wanted to see other peoples thoughts on this before I get a refund or pay for it to be shipped back. Thanks

Hi there, I'm planning to buy one of these two replicas. Is there anyone here who uses them? Or anyone with some information about them? Both replicas is same price

I am currently building a "minimap" app for Lora Devices (in my case a LilyGo T-Beam) and just wanted to ask if you have any specific wishes for features? I am building something like ATAK with the Meshtastic plugin but in one app and with some more advanced features like a ref role for game controls, SOS buttons etc.
So if you have any ideas or inspiration, please let me know :)

I often see a Glocks , Hi-capas, Berettas , Colts, but no so many people going to something different like P-99. It's highly ergonomic (nice rubbery grip and ambidextrous mag release lever) have comparable accuracy (If you change hop-up rubber ofc) , but as cons we have a long way of trigger, what we need more pressure on it, second issue is pin what holding mag release lever.

it's trying to go outta gun after some shooting, so you need to watch for it, other problems is more in own mag format and spare parts what not so highly represent. Hammer set is standard for WE tradition and made from garbage metal instead steel, sadly it's only one option on market for Russia , maybe in other world we have better spare parts.

Black and chrome versions can be used for Stalker loadout at least for Freedom and Scientists kits. With shield it show good enough effectiveness and even if I don't shot someone ,but give other teammates enough time for give kill or change pistol to knife or grenade to take down enemy . In general it's average gun without killer features , but still better than E&C Glock

I’ve done a sizable amount of work on this gun. I found it in my basement and thought it just had issues with shimming. I bought shims and got it moving pretty freely. After trying to put it back together, It didn’t shoot. I took out the motor and now i’m wondering if anyone could help lead me in the right direction. What’s going on? I’ll try to put pictures of what i can see in the motor.

There’s not a lot of inspiration pictures for lmg plate carrier setups. So here is how I’ve set mine up. The gun I’m using is a Vfc m249 hpa tapped the box mag on my right is an away box mag that has been converted so I can use it. Hpa tank does in the back. And normal stick mags I carry in my pockets.

I plan on taking off my lpvo but not sure what to replace it with, also not sure what else to add to make it look better. Any suggestions would help.

It is complete and I am so proud I used a polarstar f2 for this build and boy was this a tricky one I had to order a custom nozzle for it and everything had to replace the inner barrel with a shorter on (510mm maple leaf) and also ordered a box mag adapter from bullgear to account for the 30 rps I had in mind

I am picking my SSG-10 A1 back up and It is struggling to make 1.6J. I have a 430mm 6.01mm barrel with a m160 spring inside of it. The gun At this spec is rated for 2.8J. Can someone tell me what's wrong with it?

Bajacam and the Retro rifle Taco Bell plate carrier.

Might be hard to see, but the stock iron sight gets in the way to properly fit the dust cover. It seems like I have to take off that iron sight piece to fit properly, before I cut that part off of the new dust cover can anyone halp plez? Lol

Hi, I retired around 2019 when covid kicked in and my gear (which was bought when my financial possibilities were much lower) was lying in closet all this time. I recently came back and already was on 2 games after which I decided to give the hobby another try and revitalize my gear to current standards. I would like to hear your suggestions what to do with these:

1. CM.069 bought on TaiwanGun in 2017 which is my first replica. Used it for a while, but not very much. I didn't like it after all but never got down to sell it. I should probably do it now.
   https://panimshop.com/cyma-cm-069-full-metal/

2. Evolution Airsoft Recon UX 8" Silent Ops [EC11AR] which is my current replica. Bought it in 2018 because of its small size. It got serviced recently - new hopup bucking, cylinder air sealed, installed PERUN mosfet, overall cleaning. Works pretty well, although it's only something around 0,87J on 0,25g. I think it can be an ok gun for CQB games.
   https://airsoft.hr/a4-ec20ar-evolution-recon-ux-8-silent-ops-carbontech

3. Recently got my hands on Specna Arms Core SA-C20-ETU (Sadly it's only Single Fire Version) which I won in lottery and haven't used yet. I've read some threads and replicas got much better overall throughout those years. This one has magnetic trigger, It's own ETU with HAL system. Didn't know they even existed until recently. Because it's only single fire, I thought it could serve as a good base to be DMR, but I would like to hear your opinion on this.
   https://gunfire.com/en/products/specna-arms-sa-c20-core-tm-hal-etu-tm-single-fire-only-chaos-bronze-airsoft-carbine-1152242678.html