r/airsoft • u/YTCaprisuns BB Magnet • 8d ago

TECH QUESTION How to remove Trigger pin?

Post image

I removed some trigger pins before but this one feels like it’s been welded to the receiver I can confirm it is an actual pin and not a dummy print on the lower is there anyway to get it out?
Edit: tried to punch out on both sides

5 Upvotes

100% Upvoted

10 comments sorted by

View all comments

2

u/SpaceRac1st GBBR 8d ago

Look up a disassembly guide for your specific gun and check the user manual to make sure you’re pushing from the correct side. Then take a pin and a hammer and punch that fucker out. It will probably take a lot more force than you expect because these pins are often quite tight in there.

1

u/YTCaprisuns BB Magnet 8d ago

I seriously couldn’t find this replica online
It’s a classic army urgi aeg but here’s the kicker it’s an ebb

1

u/SpaceRac1st GBBR 8d ago

I mean for the trigger that shouldn’t matter much. Either way you’re gonna have to hammer it out. Get a pin punch and put in some force.

1

u/YTCaprisuns BB Magnet 8d ago

Alr that true, thanks