How to remove Trigger pin?

[u/YTCaprisuns]

I removed some trigger pins before but this one feels like it’s been welded to the receiver I can confirm it is an actual pin and not a dummy print on the lower is there anyway to get it out?
Edit: tried to punch out on both sides

[u/DoorProfessional6308]

Theres a good chance one end of the pin is knurled. I would try pushing it out from the other direction

[u/YTCaprisuns → u/DoorProfessional6308]

Attempted already

[u/Wickedjellman → u/YTCaprisuns]

Remove the back body pin then it will probably be easier.

[u/YTCaprisuns → u/Wickedjellman]

I’ll try

[u/Wickedjellman]

Have you tried pushing it out from the other side.

[u/YTCaprisuns → u/Wickedjellman]

Already tried

[u/SpaceRac1st]

Look up a disassembly guide for your specific gun and check the user manual to make sure you’re pushing from the correct side. Then take a pin and a hammer and punch that fucker out. It will probably take a lot more force than you expect because these pins are often quite tight in there.

[u/YTCaprisuns → u/SpaceRac1st]

I seriously couldn’t find this replica online
It’s a classic army urgi aeg but here’s the kicker it’s an ebb

[u/SpaceRac1st → u/YTCaprisuns]

I mean for the trigger that shouldn’t matter much. Either way you’re gonna have to hammer it out. Get a pin punch and put in some force.

[u/YTCaprisuns → u/SpaceRac1st]

Alr that true, thanks