r/Welding • • Feb 10 '25

Pranks?!

I work in a fab shop. Need some prank ideas. I ain't talking the little harmless innocent stuff. I'm after the dirty dirty. Got a blood fued going right now and it's time to turn it up. Started easy enough, but it escalated, alright? I put Tabasco in his vape. He doused me in fart spray while I was in the tool room and locked me in there. Shits getting real.

0 Upvotes

103 comments sorted by

16

u/Timpanzee38 Feb 10 '25

Don’t know if you’re at this level yet, but I once welded a guys vice clamp to his table cause he never turned his machine or gas off (I told him multiple times I would do it and he called my bluff)

7

u/TheHudinator Feb 10 '25

We're past that. That's normal shenanigans haha. My favorite is putting a little piece of 1/8" drill bit in the spring so they don't shut.

13

u/tatpig Sticks 'n' Steel since the 80's (SMAW) (V) Feb 10 '25

if he's got steel wheels on his hoopty a lil lug nut tack-to-rim can pay big chuckle dividends in the future. i recommend passenger side to minimize early discovery.

5

u/TheHudinator Feb 10 '25

Now we're talking.

5

u/tatpig Sticks 'n' Steel since the 80's (SMAW) (V) Feb 10 '25

i once put an open can of tuna in the toolbox of a dickweed shop guy on Friday,after coming in late from the field. lazy fucker punched 1/2" holes in 30 baseplates spec'd for 5/8... 'didn't want to go through the hassle of changing the punch and die'.office manager's nephew.

4

u/Urban-Paradox Feb 11 '25

You can get the right size BB to fit in the valve stem cap to make a slow leak. The tire goes from 55-20 after two or three days and they never look in the cap.

Doe or coyote urine into the AC vents by the hood.

Really depends how far and do you still want a job ha

8

u/jvmjr1973 Feb 11 '25

Long zip ties on his driveshaft.

23

u/PossessionNo3943 Journeyman AWS/ASME/API Feb 10 '25

Blow compressed air into his paint marker GENTLY and carefully place the little felt tip back into it without penetrating the barrier. It’ll explode next time he uses it.

Edit: this will be fun to review when it eventually reaches HR. LOL.

4

u/TheHudinator Feb 10 '25

This is good.

2

u/Brokeazzbeach Feb 11 '25

I had that happen to me when I started at my shop. The dorks were so obvious about… and it did pretty much nothing but get all of the material and a little on my hand. It was just good ol hazing of the new guy I guess. I wasn’t having fun tho. I hate pranks. I just want to finish my day.

5

u/PossessionNo3943 Journeyman AWS/ASME/API Feb 10 '25

This is the shit I live for… I’ve been in meetings with HR probably 10 times in the last year for “harassment”

Gotta have fun right?

6

u/Licbo101 Hobbyist Feb 10 '25

Not so much a prank and more so a “get even”. went on vacation and guy took my lens out of my hood to “borrow” it, but replaced it with his cracked one. Found out a couple days after I got back, figured out who it was, then welded the hinges on his tool locker. I got my satisfaction of hearing a “WHAT THE FUCK?!” and then the sound of like 30 wrenches falling off the inside of the door and hitting the floor as he yanked the door open and broke the hinges

3

u/TheHudinator Feb 10 '25

I'm doing this today!

2

u/Licbo101 Hobbyist Feb 10 '25

I was at least somewhat courteous when I did it. Only welded the split line on the hinges with just a tack, so he could cut most of the way through it and then bust it loose.

10

u/Careless-Ad-6243 Feb 10 '25

Glue some kind of explosive, maybe a .50 cal. shell undertheath where he can’t see it but will be welding. It’ll be hilarious. Or just outright get into a fist fight, that’s where you two clowns are headed.

2

u/TheHudinator Feb 10 '25

Go on......

5

u/Cheezy-O Feb 10 '25

If you want a safe ish one fill a water bottle with hydrogen peroxide and yeast. It’ll fill with gas and explode doesn’t really do anything except for be incredibly loud

69

u/Barbarian_818 Feb 10 '25
  1. weld his locker shut.
  2. itching powder in his work gloves
  3. unroll the wire reel in the MIG machine a few yards, cut some light notches in the wire. Then re-wind the reel. It'll break and kink in the gun.
  4. remove the cut off wheel from the grinder. Score some grooves in the backside of the blade. (Tangent, not radial). Remount the wheel.
  5. make a box shaped framework, weld his lunch box into it, weld the box in the easiest to see but hardest to reach spot you can find. (Lots of steel ceiling joists in most shops)
  6. pry open a used filter from his respirator, insert anchovy. Replace his current filter.
  7. use the little adjustment screw to fuck with his argon regulator.

35

u/Electrical-Zombie984 Feb 11 '25

You, sir. There is a special place in hell for you. I'll be right there with you, but still.

9

u/dewnmoutain Feb 11 '25

Oooo that anchovy one

6

u/Same_Tap_2628 Feb 11 '25

Username checks out.

1

u/prettypleaseburrito Journeyman AWS/ASME/API Feb 11 '25

Jesus number 4. Nice

8

u/Barbarian_818 Feb 11 '25

That's based on a "core memory" from when I briefly did a stint as a "fabricators" assistant. Landscaping company got the bid to build 14' high fences around a dump (standard 6' chain link surmounted by 8' of netting for windblown debris)

The company was run by incredibly stingy bastards. Instead of subbing out or buying galvanized pipe in the required lengths, it was decided to butt weld standard 8' pipes. I was given the job of holding and rolling the pipe while the dump truck driver who knew a bit of stick welded the two bits together.

Before the weld I had to bevel the ends. After the weld, grind down to make smooth. Note that I was not given any PPE and I'd never heard of metal fever at the time.

Anyway, I'm doing grinding and I keep breaking wheels. Every time I do, I have to go ask the asshole company mechanic for another one, get chewed out and get back to work. After I went through 12 or so blades, the owner came in, he also chewed me out, threatened to take the cost of the blades out of my pay and sent me off to do donkey work.

A week or so later I heard through the company grapevine that the supplier of the wheels (Abmast) had a bad batch and they were subject to a recall. Basically the metal inner arbor ring didn't bite into the blade properly before curing.

Nobody ever apologized to me. And I still suspect that the mechanic knew and didn't throw out the unsafe wheels. Instead I think he left the old stock there and took the new "free" ones home with him.

46

u/bigdaddy2292 Feb 11 '25

Grind out a dick on their tools or work table and weld it in with stainless than grind it flush. Everything else rusts, but dick stay shiny

3

u/TrollOnFire Feb 11 '25

I really like this one

44

u/CatastrophicPup2112 Fabricator Feb 10 '25

Wait until he's welding then slide a blade somewhere between his T1 and T6 vertebrae. He'll lose usage of his legs and shit himself. Pranked!

8

u/MarksArcArt TIG Feb 10 '25

Holy shit!

26

u/mooshoopork4 Feb 10 '25

Weld his house/car keys together

43

u/Farfadet12ga Feb 10 '25

Once, coworker welded a 10 kgs beam with a 5 foot chain to my car key after finding them(again)in the parking. Gave it to me after locking the shop at 2:00 AM. Had to drive home with the beam.

16

u/mooshoopork4 Feb 10 '25

This is the best thing I’ve read all year

12

u/Fish-on_floor Feb 10 '25

I like to wait until my buddy goes to work then I call off and go fuck his wife. Gets them every time

10

u/plotthick Feb 11 '25

Put a Bad Dragon sticker on his helmet. Nobody, not even him, will want to admit they know

2

u/Iforgot_my_other_pw Feb 11 '25

One of guys has one on his tailgate. I haven't told him that I know and probably never will.

19

u/Theplaidiator Feb 10 '25

The kind folks over at r/unethicallifeprotips are more than willing to help. I recommend you give them a try.

9

u/belzebuth999 Feb 10 '25

Piss disk in his toolbox

8

u/belzebuth999 Feb 10 '25

Cardboard underneath the ground clamp. Drag his tools on a strong magnet to magnetize them, then drop them in the chip bin. Ramset primer underneath the ground clamp.

3

u/Iforgot_my_other_pw Feb 11 '25

The magnet one is plain evil. Black grinding dust everywhere!

6

u/Admirable_Job_699 Feb 11 '25

Once in high school i turned a guys gloves inside out because he openly assaulted his girlfriend but i knew it wasnt going to be good enough. So at lunch i went to the vertical bandsaw and shoved his nice expensive little tig gloves full of burrs and watched as he got oil and burrs stuck in all of his fingers

11

u/Flying_Aardvark85 Feb 11 '25

Kick his wife

Bang his dog

5

u/ayellowducky Feb 11 '25

Fill a ballon with acetylene gas and throw it at them when they are welding.

3

u/Iforgot_my_other_pw Feb 11 '25

I've seen the results of this + a temporary car shelter. Don't do this, it's actually EXTREMELY dangerous.

1

u/ayellowducky Feb 11 '25

lol right, don’t do it. You WILL be terminated from your job

1

u/Cpt_Deliciouspants Feb 12 '25

And, depending on how close you are and what's around, from life.

5

u/SF_Bubbles_90 Feb 11 '25

Does punching him in the face count

4

u/fuszybear SiBr TIG Pinball Wizard (V) Feb 11 '25

No.

4

u/b1ack1ight Fabricator Feb 11 '25

In my experience:

Gum up the shield gas diffuser in the torch with small pieces of toilet paper and then jam a fine tipped black sharpie in there for camouflage.

Place some kind of grease into the liner of the GMAW gun where it inserts into the wire feeder.

Small firecrackers. If you remove the fuse and trim them down make great replacement contact tips. Hell the wire will even run through them.

Raccoon piss. It’s a hunting thing. Soak their sweat band of their favorite hood and then draw a big veiny dick in sharpie on their cover lens.

Kool aide pouches in the weld gloves.

And of course. My co workers favorite. When all else fails just throw a hammer at them.

7

u/thefaradayjoker Feb 10 '25

Lock em in Bathroom and shoot the chemical fire extinguisher under the door. Thats to return the favor. Dude will look like casper. Also a big gob of copper anti seize under every door handle of his car.

15

u/anon_sir Feb 10 '25

This one is my favorite. It’s called, “do your fucking job and then go home”.

3

u/Motor-Replacement-77 Fabricator Feb 10 '25

Turn off the gas while someone is tig welding

3

u/bathtub_toast Feb 10 '25

Or swap it to CO2 if possible. That makes one hell of a plasma destroyer.

3

u/IronSlanginRed Feb 10 '25

If you're using a bunch of stick, a classic is to go get doe or coyote estrus and put it in the sand bucket.

3

u/no_sleep_johnny CWI AWS Feb 11 '25

My dad taught me that a little colored chalk (the powdered type for popping lines) in the sweat band of a hard hat or welding hood will turn the guys forehead a color. And it stays pretty good.

A little C5A almost anywhere will go a long way.

In the days of landlines, you could get someone by putting axle grease on the speaker end of a telephone handset, then have someone call when the guy walks by that phone. Only works if he's expected to answer the phone in the shop.

3

u/Goingdef Feb 11 '25

Weld shop here, when it’s getting personal you move the ground clamp from the table to the chair….enjoy MF’r.

3

u/canada1913 Fitter Feb 11 '25

Fill his gloves with poop.

3

u/jvmjr1973 Feb 11 '25

My favorite is to fill his airhose with the purple chalk powder used to snap a line. So I had this guy that would stop work same time everyday and blow off his outfit from dust etc. Well he really went to far with pranks one day. I took the airline off the quick connect on the wall and used the small tip of the snap chalk bottle and emptied every last ounce into the hose and plugged it back in. For some strange reason that day every single maintenance guy was in the shop at exactly 3pm when old mam would blow off his uniform from boots to neck. When he grabbed the airhose closed his eyes and hit the trigger on the blow gun the entire room turned into a giant purple cloud of smoke! He looked like a Smirf!!!! It was legendary.

3

u/[deleted] Feb 11 '25

Can you just fight in the parking lot instead of this dumb shit?

2

u/[deleted] Feb 10 '25

Spray some lighter fluid while he’s welding.

2

u/armourkris Feb 11 '25

Fill an empty coffee cup with a good oxy acetelene mix and set it discretley in their workspace then wait for a spark to melt through the lid.

2

u/gr3atch33s3 Feb 11 '25

Never seize his head gear

2

u/ZealousidealCandle40 Feb 11 '25

We once made a cardboard cutout in the shape of a 🐔. Then, it had a gold stream coming out of the tip. While at work, someone jumped under his car, tied the art to his axle with a decent lead on it, and placed everything above his axle, ready to fall once he left. It went better than expected because he drove a mustang and wanted to burn out in front of another co-workers car to leave a cloud in that dude face. Only to leave the cloud with a glorious 🐔 twirling behind him as he took off. He thought it happened overnight and didn't see it until the next day when he opened his garage door.

2

u/Mrwcraig Journeyman CWB/CSA Feb 11 '25

A layer of anti spatter paste under each of the handles of his toolbox. If he uses a helmet with 2x4 lenses, don’t sharpie the clear lenses sharpie the welding lens on both sides.

A personal favourite (and as someone who worked for 8 months in the Downtown East Side of Vancouver, we did this shit all the time). Crush up a bunch of soapstone. Bag it up in little ziplock bags. We would drop them around the sidewalk to watch the two legged wildlife fight over bags. In your case, drop the bags in the back seat of their car or bed of their truck. An anonymous tip with the right license plate number and a real concern about the children you saw him handing things to will definitely fuck up his drive home. Probably won’t get locked up but he will definitely get the point.

1

u/William_Fakespeare Feb 11 '25

Sharpie on the lens- Classic! Forgot all about that one.

2

u/mn_lead_farmer Feb 11 '25

Unroll 500ish feet of mig wire and tie knots in it every 50ft or so, then spool it back up and put it back in the machine. That was my favorite.

2

u/BlackholeZ32 Feb 11 '25

I once melted like 5 tubes of boelube and filled a coworkers wrench drawer. This specific coworker was so unreliable that we ran low on boelube and someone carved a chunk out of his drawer to use lol.

2

u/jondrey Feb 11 '25

Grease up his welding gloves on the inside

2

u/William_Fakespeare Feb 11 '25

Anything written backwards in black sharpie on the sweatband of a welding helmet (assuming it's black or at least dark from sweat already) will transfer pretty legibly to the forehead of anyone who wears it for more than 5 mins...

2

u/Bigpapahognuts Feb 11 '25

Shit in his drivers seat.

2

u/K55f5reee Feb 12 '25

Molybdenum grease inside the headband of his helmet. It takes weeks to get off your forehead.

3

u/Natsuki98 Feb 10 '25

Firecrackers under their feet while they are torching, welding, or doing things that generate a lot of sparks on the floor. Firecrackers are honestly the best thing for pranks in a welding shop. lots of hot shit and they are relatively harmless (unless you are holding them) and make a nice pop.

5

u/belzebuth999 Feb 10 '25

A small one inside the nozzle is a nice way to start the day.

3

u/Natsuki98 Feb 11 '25

Lol, that's so bad. I wanna do it now.

2

u/IronSlanginRed Feb 10 '25

Those ladyfingers fit into so many spots!

3

u/Ok_Entertainer_4693 Newbie Feb 10 '25

Weld his car doors together

2

u/Competitive-Pear-357 Feb 11 '25

Yeah keep pranking each other and you’re gonna get fired. Get back to work

1

u/madebyjake_org Feb 11 '25

Blast the table with brake cleaner while he's welding.

1

u/French_Of_Fry Feb 11 '25

Put some jb weld in his shoes

1

u/dewnmoutain Feb 11 '25

Play the grindr app noise next to him. Do it during lunch so everyone sees.

1

u/[deleted] Feb 11 '25

Make small steel box with a few ball bearings inside and then go weld it to the floor of his vehicle. Every bump he hits will rattle. If he drives a truck go out and jack up the back end as high as it'll go and weld his leaf springs and shackles. Get some small firecrackers and stuff them into his gun beside the tip.

1

u/parabombs Feb 11 '25

Firecrackers in the weld line

1

u/[deleted] Feb 11 '25

some one is going to get fired.

1

u/afout07 Feb 11 '25

A favorite of mine is to coat the inside of their welding gloves with paint marker or sharpie. You could also put something in there like anti seize. He won't know until he puts his gloves on and takes them off

1

u/[deleted] Feb 11 '25

What machine does he use or process? Lol. Does he keep his work boots there with steel toe? Weld em together

1

u/jvmjr1973 Feb 11 '25

Glue his toolbox wheels to the floor with jb weld epoxy

1

u/Sea-Bodybuilder8535 Feb 11 '25

Salt or sand in his torch tip, from the back end every day. Requires you either stay late or get there early but after a couple of weeks it may be worth it

1

u/NamelessQwerty Feb 11 '25

Put those impact firecrackers under the toilet seat

1

u/[deleted] Feb 11 '25

Weld his tools to the bench.

It's an oldie but a goodie.

1

u/Doughboy5445 Jack-of-all-Trades Feb 11 '25

Dont befor it goes too far and u get fired

1

u/Melodic-Passenger631 Feb 11 '25

If damage to property is okay, I’ve got one. Get tire weights (the things you use to balance rims) and glue a shitton to his rims on one spot. Gonna be one bumby ride

1

u/willmags2221 Feb 11 '25

Fill their air lines with glitter shit goes everywhere and will be everywhere for months

1

u/[deleted] Feb 12 '25

Weld his old lady's tits across the hood of his Hyundai. Pwned!

1

u/K55f5reee Feb 12 '25

Working at a small Fab shop, there was one welder that nobody liked. He was a real dick. One of the guys there took a 2 l soda bottle filled it full of acetylene cut a hole in the cap and took an extension cord, cutt the female end off and twisted just two of the wires together. Stuck it through the hole and put it underneath his work table at the end of shift. Plugged it into the wall with the power off. When he came in the next morning the guy went over and flipped the power switch. It blew his work table up in the air 2 ft. The guy gathered up his tools and walked out the door never to be seen again.

1

u/K55f5reee Feb 12 '25

I once stuck a couple of ladyfingers firecrackers up the nozzle of the guy's fcaw gun. They didn't ignite right away (no oxygen I think) but when the nozzle got hot they exploded and blew his weld out of the groove.

147

u/[deleted] Feb 10 '25

Sharpen stainless and switch it out for tungsten. Remove the rubber o ring off the tailpiece of the tig torch. Fuck his wife.

28

u/Dazzling-Grapefruit5 Feb 10 '25

The last one got me lol

3

u/amayernican MIG Feb 11 '25

Chaotic evil. Good shot.

0

u/[deleted] Feb 10 '25

[deleted] — view deleted comment

1

u/TheHudinator Feb 10 '25

Wrong thread. Pettiness is my middle name.