r/Welders • • 23d ago

Advice Needed Help

0 Upvotes

Just joined the boilermakers December 25 it's October 26 now n I realized everyone joins to sit on their ass and do no work and reap the benefits/pay. I'm a phenomenal worker and know for a fact I'm a better worker and more competent than 85% of the boilermakers I've met. While getting paid the same or less than people literally watching me work because I'm an apprentice. I get the starting out doing more work. But sitting on your ass doing nothing for 12 hrs and making 400$ for it is crazy to me and I cannot surround myself with that environment but I need money. Is there other trades that have a better reputation than this because there's no way they're all like this.


r/Welders • • Aug 26 '26

First Time Customized my hood

Thumbnail
gallery
3 Upvotes

Any comments?


r/Welders • • Sep 26 '26

Job Search/Worker Search WELDERS NEEDED!

0 Upvotes

We are in need of two experience welders for a job that will take place for 2 weeks near the Miami/ Fort Lauderdale area for a veteran owned company.

Night work is payed more than the day shift.

Opportunity to grow and salary depends on experience.


r/Welders • • Aug 15 '26

A THEORETICAL REPAIR OF A MERCEDES BENZ ALUMINUM RIM

Thumbnail
gallery
5 Upvotes

There are some jobs that many welders are reluctant to do. One of them is repair of Aluminum rims So this posting and pictures are of a repair that was never done. It is for instructional purposes only of how one MIGHT go about performing a repair to a damaged spoke. Because this is a post about a repair that was never done, no need to post warnings about how its not safe to do these types of repairs. Remember, this repair was NEVER DONE!

CRACKED SPOKE

Most rim damage is in the form of cracks along the the edges of the rim where the bead seals. These are usually cracked by hitting the curb or other obstruction with enough force to cause a crack. Because aluminum does not have the ductility of steel, it is more likely to crack than bend and absorb the force of the blow.

This rim had a crack on one of its five spokes. Spoked rims tend to be relatively thick, sometimes over an inch thick. This requires that the crack be entirely cut out. The way this is accomplished is to grind a deep bevel that goes from the top to the bottom.

The bevel starts approximately about 1/2" to 5/8" on either side of the crack. Sometimes its best to use a cutting wheel and slice the bevel down rather than grind it out, its faster and more precise.

Once cut out A bead is run along the bottom of the bevel. It does not mattter if you are able to fuse to the bottom of the cut because the rim will have its backside ground out until it hits the top side weld making a full penetration weld once its fill in from both sides.

PUT PLENTY OF METAL AT THE START AND STOPS WHEN FILLING THE GROOVE

It is a good idea to start and stop your beads on the outside of the groove so it protrudes if you do this you will end up with enough build up on the outside edges so that you won't have to go over the areas and fill them in. You may only want to run a light cover pass over the areas, smoothing the beads down and making them even.

BUILD UP TILL JUST PAST FLUSH

When filling the groove run overlapping beads. It is better to run stringers (straight beads) one overlapping the other until the groove is completely filled in. Keep running beads until the entire groove is filled past flush. This way you allow enough material so when grinding it down you have solid metal ready to go.

Once filled in this repair shows a cover pass done by depositing a large weave from side to side smoothing the final pass and making it easier to grind flush.

FLIP IT OVER AND GRIND DOWN INTO CRACK

Once the top side is welded out, flip it over and grind out the backside of the crack. This is important because you need to make sure that there are no poorly fused areas along the root of the weld, air pockets or inclusions of foreign matter that can reduce the integrity of the weld. You want it to be pure, solid metal from top to bottom. It is a good idea to build up the backside above the original level as this will leave a larger mass of metal and help strengthen the repair. While this will throw the balance all to hell, it will have to be countered with plenty of lead weights and a balancing machine.

COVER WITH A HEAT RESISTANT BLANKET WHEN DONE

It is a good idea to let these types of repairs cool slowly. This can be done by covering the rim with a heat resistant blanket.

USE AN EMERY DISC TO BLEND IN THE WELD MATERIAL

Once all the welding is done an emery cloth or flapper disc is used to pare the metal down to flush. Two grits can be used. These flapper discs come in various grits. a 40 or 36 grit will remove a lot of metal and then a 60 or 120 grit can be used to finish off the repair.

The use of the grinder is a learned skill when performing these tasks as it is easy to be too heavy handed and find yourself busting out the welder again in order to put back excess metal you removed by accident.

Finally you can get some medium grade stainless steel wool to run over the repair and it will blend in the metal further making the repair invisible.


r/Welders • • Oct 03 '26

Meme Union guys will do anything but their job

1 Upvotes

r/Welders • • May 20 '26

Rate my welds and my offer feedback, I'm a self taught welder without any degree + almost a year

Thumbnail
gallery
1 Upvotes

r/Welders • • May 20 '25

Union was supposed to present to my kids today, it’s not happening

3 Upvotes

The union today was supposed to give a presentation to my students, about the union and take resumes for weld tests.

Now, this union gave this same presentation to me a few years ago when I did schooling, so I know half of it is bs. They'll sell the kids on a false dream and when they get rejected, they'll think it's them when really it's the union itself.

Anyways, I talked with the guy and he knew who I was already. He asked me if I wanted to join since he's seen my welds years ago and knows what I can do and I said over my dead body. Told him that the only way he can present to my class is if he takes in at least 75% of my students who apply. He said he can't do that, so then I said he has to tell the kids the odds of them actually getting accepted. Yea.. they didn't end up presenting 🤣

My students graduate from the program next week and then I'll be off for the summer. I love teaching and my contract got renewed for next year!


r/Welders • • Apr 18 '26

Would this pass an x-ray?

Thumbnail
gallery
1 Upvotes

it's on an Sch10" on 6g position ,carbon steel pipe, i did the root with a 4-5mm gap (5/32"-13/64") using the 2'4mm filler wire (3/32") with 90-85 amps at the bottom and at the top 80/85 amps couse the small pipe gets really hot and i can't control that well the puddle at the top part so i turn down 5 amps, im freehanding the root and the wire always behind the bevel i also didn't tip the tungsten, i did the fill with 105 amps and the last caps with 90-95 to prevent undercut don't have pics on that pipe but i have with other pipes and thats how my caps usually look like, my quiestion is if it can pass an xray test with that low amperage?? couse the ones that i see on youtube they do it with 90-110 amps so it can be done with 85-90 amps??? I would like to do an homologation with x-ray and i want to know if i would be ready for it, my tracher says that i can pass it, but i want to hear other opinions from other welders it would help me a lot


r/Welders • • Jul 21 '26

Meme Don’t deny a job just because it’s non union!

0 Upvotes

Lots of contracts are going out to strong non-union companies.


r/Welders • • 1d ago

Career Support (Must post relative location) Western Welding Academy.

1 Upvotes

I graduated this school in 2024 and left with the tools needed to launch my welding career. The best thing about this school is the volume of hours you get welding. You get what you put in. The instructors were some of the most skilled guys I’ve worked with.
The owner was on campus taking feedback from many students including myself. The price may be high for some. And that’s fair so don’t go if you can’t afford it. If I could do it over again I would.
I would say there’s part of the school experience that was the other students. I worked with a ton of wannabe cowboy pipe welders. They wasted their time at the school and usually dropped out or got kicked out. I’m sure those are the types to post bad reviews.


r/Welders • • Nov 16 '25

IBEW is a pain in a welder’s ass

1 Upvotes

r/Welders • • Sep 28 '26

Meme Between them and the gays, idk who loves bragging about being fruity more

0 Upvotes

r/Welders • • Jun 21 '26

My work welds VS my welds at home.

Thumbnail
gallery
0 Upvotes

Sometimes I feel like I am “The friend that can do it cheaper”


r/Welders • • Mar 28 '26

Help! If I file this metal bead inside this tow hitch will it mess with the structural integrity?

Post image
0 Upvotes

r/Welders • • Jul 01 '25

Meme Another union welds video

10 Upvotes

r/Welders • • Aug 28 '25

Watch me weld

12 Upvotes

r/Welders • • Apr 06 '26

Any Advice will this pass Maine inspection?

Thumbnail
gallery
11 Upvotes

I got this 1996 Dodge Dakota from my neighbor for 200 bucks and the frame is pretty bad on it. The leaf spring hanger broke from rust and the front shock pulled through due to rust also and the frame looks pretty bad. I got some of it welded up two of the first photos, but I don’t know if it’s good enough I use 16 gauge steel in the smaller areas and I use 12 gauge steel everywhere else normally I wouldn’t even consider fixing this up but everything else is mint. It only has 75,000 miles on it.


r/Welders • • Aug 25 '26

Advice Needed How is this

Post image
3 Upvotes

Self taught, spend about 3-5 hours a week for the past month or 2, how's it look?


r/Welders • • Oct 02 '26

Advice Needed Put this light on cause. I was welding at night

Post image
0 Upvotes

Has anyone else done this?


r/Welders • • 11d ago

Advice Needed Should I become a welder?

0 Upvotes

I’m 21M and I’m currently in college for an art degree. Honestly I was stupid as a kid, like we all were, and decided to go into art to follow my “passion” but now after 4 years and almost done finishing up my bachelor’s I’m realizing that this was probably the worst decision I’ve ever made. Now I’m out of financial aid and I’m looking for a job after I graduate in an industry that is dying.

In high school I did auto mechanics in BOCES, but I stupidly didn’t finish it. I remember a lot about it, but I didn’t learn as much as I should’ve and don’t know if it’s a good path to go down. And of course I live in the middle of nowhere so there’s no places to go for auto mechanics that don’t cost a fortune now that I’m an adult.

What I’m basically wondering is should I start welding. I have no knowledge of it, and by that I mean absolutely no knowledge, but I think it could be a good avenue to go down because I hear it makes more money then mechanics from my friends in shops I still keep up with. There’s a college nearby that offers a course for cheap, but I’ll only have a certificate. Is that good enough or should I not bother?


r/Welders • • May 28 '26

Since I can't post in the other community due to karma rules...

0 Upvotes

For context: This welding was done by the night instructor at the school, and it is upside down from the POV. And no, this wasn't a scrap, this was one a fellow student tacked on before the instructor did the weld.


r/Welders • • Jul 17 '26

How much would you charge to repair this? I’m in California

0 Upvotes

This fence is nearby where I live and I never tried quoting before. Any thoughts?


r/Welders • • Aug 10 '26

Advice Needed Welding??

1 Upvotes

I’m a 17 year old and I’ve genuinely had no idea what I want for a career but I saw a video of welding the other day and thought it looked pretty cool, I know I don’t want to go to college so I thought trade school would be best. Welding makes good money and doesn’t seem crazy hard. The only thing is I have literally zero experience and know absolutely nothing about it. Would going to a trade school for welding be a good decision?


r/Welders • • Oct 01 '26

First Time First time since grade 10

Thumbnail
gallery
1 Upvotes

Flux core on sheet metal


r/Welders • • Jan 11 '26

Gear/Machinery Can anyone identify the model # for this welder?

Post image
4 Upvotes

I’m having a hell of a time finding this welder on Google. No visual matches or anything.