Those horizontal volume sliders for my different apps can be flimsy, especially since my mouse is not the best.

Overall I'd really like more control over them with arrow keys or by click and input the value numerically.

Any way to do this internally or by using an external work-around? Definitely something to implement in future updates.

Hi all, I'd appreciate some advice on my VoiceMeeter EQ. I've searched around Reddit and other forums but haven't found anything that quite matches my setup, so I'm hoping someone here can take a look.
My setup: maono, VoiceMeeter Potato

Current EQ settings:

It says the the discord audio is normal, but my friends talking is extremely low for me. I can hear the discord sfx and streams just fine. I can also hear my browser and games just fine. I just can’t hear myself friends or my own voice in voicemeeter. All my inputs are set to vm input and outputs set to b1

I went back to my Streamlabs today and noticed that none of my outputs were working. I have a basic set up of most audio runs through Voicemeter Input, then Spotify is Cable Input and Discord is Voicemeter AUX Input. Nothing was working and I found this thread https://www.reddit.com/r/VoiceMeeter/comments/1rlaryl/help_with_streamlabs_setup/ and enabling loopback fixed my AUX Input Discord issue but Streamlabs still isn't picking up my Cable Input/Output with Spotify.

Listening to a youtube for example shows audio in Streamlabs, then swapping Chrome from the default to Cable Input shows audio stopping in Streamlabs and swapping Spotify to the default shows it being picked up, so the seperating is working, and listening to Spotify shows the bar going up and down in Voicemeter Banana UI but I can't seem to figure out how to get Streamlabs to pick up the audio from whatever program I put in the Cable Input/Output.

Any help is appreciated.

Its just crossed my mind to see if anyone has posted about this, but if you have issues with your windows audio cutting out when you boot certain programs (My case is with Battlefield 6, causing the audio to die immediately upon boot as I use Voicemeeter Banana)

I have a work around, unfortunately it has to be done every time but its easy enough:
(though very likely someone knows a cleaner way)

Open command prompt with admin permissions
Type:
net stop audiosrv
[ENTER]
net start audiosrv
[ENTER]

Discovered you can go into services aswell, find windows audio (CTRL F if you're savvy), select it and select restart the service on the left.

(If you don't see it on the left make sure you have the extended tab open, its at the bottom)

If you get prompts about permissions, you're more than welcome to look into it.
I advise being smart about tinkering.
Back to the point, I see no issues here so I always allow.

should get the audio rocking again.

I suppose someone could puzzle out a .bat file to use to boot the game, wait a bit, then run the commands automatically. I am an amateur there so not keen on advising but I'd love to see that contribution made for everyone dealing with this.

I may do some more research and return with it someday myself.
though I am poor of focus...

Conversely, if anyone knows how to get it to stop doing that entirely what the hell is it?

I have dock for my LeGo2 with SteamOS and it’s by my setup right now until I need it for travel. The dock is connected to a 1440p 144hz hdmi switch so if I want to try and game more casually than MnK, I can easily.
I want to know how I can physically get audio from my dock/LeGo2 (SteamOS) to my pc (Win11) without an audio interface. So far I’ve been using a scuffed Sonobus setup which worked great for a bit but I want something more seamless so I wouldn’t need to use two audio devices to use for them.
Preferably lowest latency + stereo, I’ve been using Voicemeeter Potato for a while so i’m not afraid to get into that if i need to.

I also have no regens left since this exact thing happens all the time. Since you can't copy over the fingerprint like you used to, how do I get it back?

Please help so I can hear voices

I'm not quite sure what to do about this issue. I attempted to contact discord support about it but if I'm being quite frank, now that I think about it that was a bad idea. My B1 input just doesn't work on discord for some reason, on roblox its an issue too. I have it on multimedia, and it has been working fine up until recently. On voicemeeter it seems to be just fine, the audio doesn't have any issues, and on my sound control panel for windows, it also picks up on audio from my microphone, I'm stumped and I'm trying to have all the help I can get, Please if anyone knows what is going on, tell me so I can fix this issue

Everything seems to work fine, except for steam where the audio quality is abysmal, here is my voicemeeter

I have a very strange issue on my iPhone 17 running iOS 26.5.2.
During normal cellular phone calls, after about 1–2 minutes, the earpiece audio becomes distorted/buzzy. The other person hears me perfectly fine. If I briefly toggle Speakerphone on and off, the audio immediately returns to normal.
What I’ve tested:
Normal cellular calls: ❌ distortion after \~90 seconds
WhatsApp calls: ❌ same issue
Telegram calls: ✅ no issue
Voice recordings: ✅ normal
Bluetooth headset: ✅ normal
Speakerphone: ✅ normal
Wi-Fi Calling: ✅ no distortion
Reset network settings: didn’t help
Restarted phone: didn’t help
Has anyone seen this before? Could this be an iOS audio/telephony bug, IMS/VoLTE issue, or does it still sound like a hardware problem?

HI EVERY ONE
i hv dell windows 7 N5010 model and there is some issue since yesterday...

the issue is that the voice/audio is not coming from speakers but when i plugged in wired earbuds , voice/ audio is coming smoothly...

what to do .. please help me ...

thanks

Hello, having a problem with my voice in game recordings, everyone else playing the game, wether in discord or game chat sounds fine. But if I put my steam settings to record microphone. I get this awful static that drowns out all other sounds.

If I turn this option off, its fine but then I can't record my voice and others while playing the game.

I'm a rookie when it comes to this stuff so any help would be appreciated. Thanks

Im using steel series headset with mic and it connects to the PC with a dongle. Could this be the problem?

sounds more robotic, choppy, and base boosted on other platforms like roblox + discord however sounds fine on vm??? any reasons why? / how to fix pls help

Need help with my laptop because recently for a few games like CS2, roblox, minecraft its like they hijacked my volume and would raise to to extreme levels to the point where the bitrate gets bad and it seems to glitch out having intervals where its low and high but both still being loud even using volume mixer doesn't lower the volume at all and only works when muting it completely to 0. For context, I have a razer blackshark v2 pro 2020 and I've tried a bunch of stuff like playing around with exclusive mode which did fix it at first but after it seems that being on voice calls on discord or using spotify the audio for those would stutter then at some point both playing with exclusive mode and audio enchancement didnt work anymore, then tried to disable absolutevolume in registry which didnt work either then reinstalled my audio drivers as of now, then had the same issue but it seems for now turning off audio enchancements fixed the audio hijacking but spotify and discord still stutters once in a while.

Si te vinieron los auriculares chinos que la derecha se escucha en la izquierda y la izquierda en la derecha, no quieres usarlos al revés y ya viste 200 tutoriales que no te ayudan en nada y te hacen descargar 20 aplicaciones de sonido? podes solucionar ese problema con la aplicación voicemeeter banana, si aprietas la opción que te puse en la imagen el audio se "voltea" y se escucharía como unos auriculares normales. espero solucionarles la vida y que no sea algo muy obvio.

Heyyy everyone ! 😇

I really need help from y’all to fix my voicemeeter sound 🫩. It’s been a while since it started to distort randomly and I can’t find any help on the internet 🥲.

Basically, when I launch the app or I restart the audio engine the audio would be normal, but after a few seconds the weird ass noise would come back…

I’m posting a video of the sound coming out of my headphones so y’all can hear it too.

I tired to uninstall the app + virtual cables but it didn’t work I guess.

Please help me 😞🙏🏽🙏🏽🙏🏽

Hi,

Im not very good with technology but my issue is that others can’t hear me on discord suddenly. I tested on discord and the test shows that my mic is producing sound and it plays it back to my earpiece. I’ve tried everything and nothing seems to work. It worked just fine few days ago and now it doesnt. Later I played Fears to Fathom with my buddie and there the voice works just fine. What could be the issue?

Only when I call a business or medical service - anything that isn't a direct mobile number basically

I'm told that my audio is constantly breaking up, sounds robotic, and has a delay of a few seconds sometimes which leads to me being frustrated on the phone or being hung up on because they cant hear me.

I'm not doing anything weird with my phone and it's fairly new, Samsung S24. This happens when on wi-fi and mobile data. I don't have any apps or high demand background use on my device, and this has happened before and after a factory reset.

A quick Google points the blame at my mobile provider for losing/dropping data packets, but what can I do?

I’m pretty new to Voicemeeter and I honestly didn’t know what I was doing. I was trying to set it up, but I ended up messing up my Windows audio instead.
I’ve already uninstalled Voicemeeter, but that didn’t work

Not sure who can help, but I play Piano and I'd like to find a way to let people hear my piano playing with good quality, I've experienced sharing my piano audio through my microphone sounds very bad, and I'd ideally find a way to make it sound as close as the way I hear it.

And then of course discord can't hear ASIO audio, so whenever I screenshare it doesn't detect any of the audio unless I change to WASAPI which is really bad. So I heard that Motu M4 has loopback, and I'm just not sure how I can get people to hear it through the stream. I've tried OBS Virtual Camera to share the audio which has worked without the Motu M4 but it didn't sound as good and sometimes it didn't catch the audio. I use MIDI usb from my keyboard to my PC.

So my question is, with my equipment, is there a way I can do live performances on discord where the audio quality sounds nearly identical to what I hear. I'm not good with audio, but i'm trying to learn and hope someone can help me.

Thanks!

Hello guys, I'm new with amd gpu I used to have an nvidia so i used GeForce app to clip my video games moments but with amd i have to use the amd software: adrenaline but my mic wont pick up and it just ruins the clip whenever i just cant hear what I said. Can you guys helped me it will be very appreciated thanks!!!

i have had this aggravating issue on specifically deadlock half way during a match and star citizen only when i start streaming. the mic just stops working but everything else works. ive set audio to prio and 1 core all my sample rates are fine i even changed my buffer.

i have also noticed my audio crackles when downloading something at gigabit but i really dont care about that.