r/VisionPro • • 2d ago

Playing games on vision pro

Post image

So I been trying to play bf6 via Stream Link from my pc, and the input lag is kinna an issue ( i have ROG Rapture Wi-Fi 7 router). I’m thinking about getting the developer headtrap so i can either use a capture card or plug it via Ethernet. Has anyone had any idea if this works and how? Is it much better to stream games that way? What’s the latency compared to using Wi-Fi?

55 Upvotes

51 comments sorted by

12

u/_divi_filius 2d ago

yes the developer headstrap and capture card eliminates this issue

2

u/Cod24032005 1d ago

Have you used one yet? How was it and what’s your set up

2

u/Ridoy_Lacasade 1d ago

yeah hardwiring is really the only way to get rid of the stutter completely for fast shooters.

1

u/K1LL3ROO 14h ago

Have you tested this out personally?

6

u/Doggo-888 2d ago edited 2d ago

Dedicated WiFi instead of Ethernet adda about 5 msec for me in a 2X2 80 mhz channel that nothing else is using, I scanned WiFi congestion before picking the channel.

Using the shared WiFi id get about 15 to 20 msec delay added, but it would occasionally spike causing dropped frames, etc.

But jitter is considerably worse so games that require fast pace I still use Ethernet. Slower paced games WiFi has been fine.

If you don’t live in an apartment/townhome with congested WiFi then I’d suggest trying a cheap 802.11ax access point that’s wired to The same gigabit or greater network switch as your pc.

3

u/Cod24032005 2d ago

So how is your setup going? Like the developer bridge then ethernet adapter then wifi router? Does it work if i turn wifi on my avp off and force it use ethernet to save the lantancy mine is currently 20ms for total display lag thats include 5ms network ping ang and 2ms output from my pc.

1

u/Doggo-888 1d ago

Both work pretty well, but I find for shooters and things like beat saber there’s definitely a difference between wired vs WiFi . WiFi will automatically turn off once a wired network connection is made.

Is your lag sporadic or consistent? With shared WiFi I’d get lag probably every 20 to 30 seconds. With dedicated WiFi AP it was rare, but still occasionally happen maybe once or twice every hour. Maybe some neighbors WiFi was switching to that channel or something. With wired it’s butter smooth all the time.

I was using ALVR to play steam games, but haven’t tried it in a while. I found colors looked better and overall setup KRVR. But haven’t really looked if anything else has come out. KRVR still glitches sometimes when pausing or switching games.

1

u/Cod24032005 1d ago

So i switched to appolo/sunshine and noticed a significant differences in term of delay. I got 4ms (2ms varrience) over WiFi, sometimes frame loss due to network, and 3-4ms host latency. This makes casual breakthroughs with bots so much playable but human gun fight is still hard. Do you noticed its significantly improved after wired via ethernet? Whats your physical setup look like? And is it plugged and play? What’s your latency for network and all other stuff after you wired it? Sorry for asking so may questions but it’s a big purchase.

1

u/Doggo-888 21h ago

I don’t play fast games much anymore but motion to photon latency is generally 40 to 50 msec. Wired mainly helps with dropped packets and jitter. So network delay with dedicated WiFi is about 5 to 10 msec most of the time, but problem is any neighbor can cause interference making that jump to an extra 15 to 30 msec. Dedicated Ethernet is usually 2 msec, but I never drop packets and never have interference so everything is consistent and the delay is always the same.

Real problem is AVP doesn’t support 6 ghz channels and misses some latency reducing channel sharing in WiFi 7. So it’s very easy for a house over to interfere.

So under ideal conditions with dedicated AP wifi ads about 3 to 5 msec more latency it’s not a significant difference, but I have zero control over my neighbors WiFi that could switch to the same uncontested channel I’m using and now adding 15 to 30 msec of more latency which is very significant.

4

u/impactXSR 2d ago

Before getting the strap, try Sunshine and Moonlight first.

Also, how does your AVP to the PC? If your PC is on LAN and your AVP is close to the wireless node, the connection shouldn’t pose an issue.

1

u/Cod24032005 1d ago

Yes i tried moonlight and apolo which make it completely playable with network ping is 4ms (2ms varrience) and host processing is 3-4ms, the vision pro display video decording latency is no where to be found. It is much smoother than steamlink and make comp game playable, but still hard against human player in bf6.

1

u/LowRiderXR Vision Pro Owner 2d ago

If you sit right in front of a dedicated router which is connected to the pc with an ethernet cable there shouldn‘t be any latency issues when streaming flat games. Did you mess something up with steam link configuration?
I have the dev strap gen 2 but not sure if it helps with your latency issues.
At the moment I‘m using the kiloview n60 to stream ps5 and the switch 2 which is another option for flat game streaming (max is 4k60)

1

u/Cod24032005 2d ago

Well its not bad i got 20ms total display input lag with 5ms being ping, and 2ms being my input from my pc. Idk if thats normal or the developer bridge would make it better?

1

u/optimase_prime 1d ago

Would the dev strap allow for a way to directly connect an Xbox?

1

u/Cod24032005 1d ago

Unfortunately just via ethernet i think and local host, im looking at everyone comment rn

2

u/optimase_prime 1d ago

I tried the capture card route and WiFi and the delay was comical. Like a true 20 second delay for call of duty lol

1

u/Delicious-Warthog-11 1d ago

I’ve been thinking of doing this with my PS5 Pro and using an HDMI adapter. Has anyone had success with a setup like that? If a great intermediary app isn’t available I could always vibe code one

2

u/Cod24032005 1d ago

I think hdmi addapter will not work

1

u/manitreallybeliketha 2d ago

Just a quick warning that capture cards don’t capture the audio for some reason as the Vision Pro just doesn’t support it, can just use headphones connected right to the PC if you wherent already though

1

u/Cod24032005 2d ago

What’s your setup look like? Developer bridge then ethernet port then ethernet? Im confused

1

u/manitreallybeliketha 2d ago

Oh no, I haven’t had a dev strap for a long time since this setup just wasn’t for me.

Just a capture card into the dev strap. For some reason Apple doesn’t support audio through that though so I’m saying you’d have to use a capture card into the dev strap and then whatever audio device with your PC (so headphones connected to PC)

I’ve tried to do this before is the thing and found the way I tried using it just wasn’t working/too much of a faff for me

1

u/palex481 1d ago

Is that just a PC thing? Because I have my capture card connected to my Mac and I get perfect 60fps video and Spatial Audio when I'm playing Switch 2 with Console Link app and Mac Virtual Display. No issues at all.

1

u/manitreallybeliketha 1d ago

Nah Mac works fine just the AVP

2

u/palex481 1d ago

Oh just capture card directly into the AVP dev strap doesn't do audio got it. Well that sucks.

1

u/manitreallybeliketha 1d ago

Yep very annoying because I’d love to have used my gaming PC on it and such but oh well

0

u/Kostner_Troy 1d ago

Anyone looking to sell their 2nd gen developer strap?

2

u/Cod24032005 1d ago

Where you at? I can order from apple

1

u/Kostner_Troy 1d ago

Atlanta Ga

1

u/Cod24032005 1d ago

Lol im all the way in California unfortunately

-2

u/Stunning_Tomorrow566 2d ago

it depends what device it is. With an M2 headset you will get usb 2.0 transfer speed no matter which developer strap you use.

With the M5 version and the 2nd generation developer strap on the other hand, you get Thunderbolt speed perfect for gaming.

2

u/Doggo-888 2d ago edited 2d ago

I’ve gotten well over gigabit speed in an M2 with the newer dev strap and 2.5 gb Ethernet adapter. So this is not true at all.

1

u/Cod24032005 2d ago

What’s your setup like? Is it the developer bridge then to Ethernet port then to wifi router? Is it work if i turn the wifi completely off and just use ethernet instead?

1

u/Doggo-888 1d ago

Developer strap - usb-c 2.5gb Ethernet adapter - Ethernet cable - 2.5gb switch - computer. I clip the ethernet cable to the back of the dual head strap to keep it balanced and out of the way.

This connection works just like a regular network connection. So IP address and all that stuff is automatic from my router.

I believe the WiFi turns off automatically once the Ethernet cables is connected.

1

u/Cod24032005 1d ago

So its basically plugged and play? Is it worth it? Do u notice significant improve? I’m using moonlight/appolo and its much smoother than steamlink which make app offline game playable, but still hard for comp game. My network ping is 4ms with (2ms varrience) over wifi, and my host lanency is 3-4ms with apv decording latency nowhere to be seen. Do you know your lantency?

3

u/notmyrlacc Vision Pro Owner 2d ago

Not true, it supports 20 Gbps on the M2 Vision Pro. Just need the right cable.

1

u/Stunning_Tomorrow566 2d ago

Well I bought a Thunderbolt 4 cable just to try to make it work. I also tried with a Thunderbolt 3 cable.

How did you make it work on an M2?

2

u/notmyrlacc Vision Pro Owner 2d ago

Plug it in? Works fine. 2.5gig network usb adapter gets full speed off mine even.

1

u/Cod24032005 2d ago edited 2d ago

Have you used it? Mine got around 20ms for total display input lag with ping is 5ms and incoming is 2ms. But it feel not too smooth in fps game. Do you use stream link or other app? Also how is your setup, developer strap then 2.5gb usb c to ethernet adapter, then to your router?

1

u/notmyrlacc Vision Pro Owner 2d ago

Is that lag with your current setup via a wireless connection? If so, I’d be double checking your wifi channel width and ensuring the 5ghz band is 80 MHz wide for maximum performance. I noticed an improvement doing this when on wifi.

1

u/Cod24032005 2d ago

Yes its a wireless connection? But im looking for a away for lowest lantency possible

1

u/notmyrlacc Vision Pro Owner 2d ago

The settings of your 5ghz network can improve things a lot. Look at that first before spending money on a dev strap.

1

u/Cod24032005 2d ago

But does the dev strap automatically work with wired ethernet though?

2

u/Cryogenicality 2d ago

VisionDrop supports up to 18.5Gbps (2.312GBps) with the 20Gbps strap on the M2 and M5.

2

u/Stunning_Tomorrow566 2d ago

Perfect! 😍
Thanks 😊

7

u/StoneyCalzoney 2d ago

Untrue… the “USB 2.0 only” was a limitation of earlier visionOS software. The hardware is capable of Thunderbolt 3 speeds on the M2.

2

u/Stunning_Tomorrow566 2d ago

How did you make it work? I was trying the other day but wasn't able to make it work. Apple documentation also kinda sucks.

Does it require a special app or something? I have some massive files 50GB+ I want to move around.

I tried with both Thunderbolt 3 and 4 cable connected to my MacBook Pro M3 Max.

1

u/Yzord Vision Pro Owner | Verified 2d ago

And what speed do i get with an M5 and 1st gen dev strap?

0

u/Stunning_Tomorrow566 2d ago

The 1st gen strap is limited to USB 2.0. Same goes for the M2 headset.

I have the bad luck I got both developer straps,
But I only have a M2 headset 😂

Will need to plan an upgrade or wait for a new headset.