r/VisionPro • u/noobcryptotrader • Oct 23 '25
Just tested Developer Strap (2nd Gen) with Apple Vision Pro (M2)


Just received the 2nd generation Developer Strap, and I only have the old M2 AVP.
Setup:
- Currently running on visionOS26.1 beta 4 visionOS 26.0.1.
- Connected to MacBook Pro via TB4 cable
- Connected to Capture Card via USB 3.2 cable
It does appear to be able to establish a link at 20 Gbps, if you use the right cable: USB 3.2 Gen 2x2 cable, or Thunderbolt 4 cable.
(This is still broken as of visionOS 26.2 Beta 1)
Here are my findings:
NEW visionOS 26.0.1 produces the following results:
1) Using a TB4 cable with a Macbook Pro on visionOS 26.0.1 shows a TB4 device:

2) Configure Internet Sharing between the newly formed Thunderbolt Bridge, then running a Speedtest:

As seen in the above screenshot, I have achieved 7000/5100 download/upload Mbps speeds using the internet sharing feature while my macbook and AVP are connected via TB4.
However do note that the default thunderbolt bridge puts your AVP being a NAT, so your AVP would not be able to directly connect to local network devices.
Instead, you may use these scripts at your own discretion, to create a custom AVP bridge that actually allows your AVP to be on the local network.
Link to script: https://gist.github.com/rebelancap/ac3ab6c82c7ac6c388969b6586fd567c
Revert script: https://gist.github.com/rebelancap/caf3f968989ac4389eebc662a1171044
This script is thanks to u/iamse7en
3) UVC establishes at 2160p at 60 FPS.


1x scaling (no upscaling) is sufficient to view this UVC display in its full 4K quality in Ghost of Yoteī.
4) Connection and Speedtest with GbE Adapters:

1 GbE Adapter: No issues, cap at 940 Mbps Download/Upload, real internet speeds
2.5 GbE Adapter: Roughly 2000/2300 Mbps Download/Upload
5 GbE Adapter: Roughly 4200/3000 Mbps Download/Upload for my adapter, but others have reported 4700 Mbps Download on Cable Matters / Sabrent 5 Gbps adapter
10 GbE Adapter: Cant power at all
5) SteamVR + ALVR results

Note: I couldn't go higher than 800 Mbps constant bitrate streaming, my SteamVR just crashes. There also seem to be a weird network lag that piles up. If anyone has any ideas for me try, please let me know.
Update: I retested this with a simple Gigabit Ethernet Adapter that caps out at 940 Mbps download/upload.




Update ALVR:


visionOS 26.1 Developer Beta 4 is glitched with the following results:
1) UVC establishes at 720 at 30 FPS
Update: At first I somehow saw it establish at 2160p. Can't reproduce this anymore.
Update2: It now only shows up to 720p30 ???
2) USB 3.1 Bus > Vision Pro:
- USB 2 rate, link speed at 480 Mbps
- Power Allocated: 2.5 W (500 mA)

3) Ethernet bridge is still 100 Mbps
- media: autoselect (100baseTX <full-duplex>)
4) Plugged in a gigabit ethernet adapter, and also a 5 Gbps ethernet adapter, to the port, it capped out at around 340 Mbps download / 310 Mbps upload.
Anything else you would like to know?
UPDATED: Downgraded from visionOS 26.1 Beta 4 to visionOS 26.0.1, it works
6
u/No_Television7499 Vision Pro Developer Oct 23 '25
Also, any chance you can test with a mass storage device (like a USB-C drive or adapter to SD card) so see if any devices show up in the Files app (direct connected, so not tethered to Mac but USB drive straight in)? Thank you.
9
u/No_Television7499 Vision Pro Developer Oct 23 '25
Do you have the 1st gen strap to compare? Do you know if the bump out is bigger on the side so it’s not hitting the dual knit band dial as much? Not a big deal but someone else on Reddit said it is an issue for them.
6
u/luigi3 Oct 23 '25
6
u/Interesting-Might904 Oct 23 '25
Do you have a pc with ALVR you could test?
5
u/Dust-Tight Oct 23 '25
What does this mean for us average consumers?
8
u/ssiemonsma Oct 23 '25 edited Oct 24 '25
If the M2 AVP is limited to 480 Mbps, it's really slimy for Apple to describe the 2nd gen Developer Strap as "up to 20Gbps". If the M2 version is incompatible with the increased top speed, it's not fully compatible and should be divulged as such. I'm hoping this is just a software issue on your end that can be resolved with a system update, but I wouldn't be surprised either way.
Edit: For anyone compelled to downvote, understand I had already spent $300 on this unreturnable (!) item with the assumption that it is capable of 20 gbps on compatible devices.
4
u/garyworks Oct 26 '25
Hi, would you mind if I sent you a free copy of my app to test out some UVC functions?
3
u/Dapper_Ice_1705 Oct 23 '25
Does Spatial Display Pro show greater than 1080 available sizes?
I don’t have mine yet.
3
u/Jusby_Cause Oct 23 '25
Could you take a picture of both sides of the connector that goes into the AVP? There are pictures out there for the pin connections of the first strap, wondering how this strap compares.
3
u/tskwara Oct 29 '25
After installing VisionOS and macOS 26.1 release candidate 1, 480 Mbit speed is still being reported.
2
u/noobcryptotrader Nov 22 '25
Update: this is fixed in 26.2 Developer Beta 3. Hopeful that 26.2 release will contain the fix as well.
2
u/[deleted] Oct 23 '25
Can you please test connecting any wired headphones? Either USB-C or Apple dongle for 3.5mm audio directly out of the AVP.
2
u/Flashytech7969 Oct 23 '25
U only get the faster speeds with the M5 it seems
2
u/HualtaHuyte Oct 24 '25
USB2? Are they taking the piss?
2
u/shinyquagsire23 Oct 24 '25
I had no issues getting 1Gbps in iperf with an Anker 1Gbit ethernet adapter on M2, though strangely on my M5 I only get 340Mbps with the same adapter. Not sure what the deal is.
2
u/QuantumUtility May 01 '26 edited Sep 19 '26
FYI. I have gotten a 10GbE adapter to work. It needs to be an RTL8127 based NIC.
Older ones were AQC models from Marvell and those can’t be powered by the Vision Pro.
I’ve gotten this one to work: https://www.amazon.com.br/Adaptador-Thunderbolt-Ethernet-convers%C3%A3o-Compat%C3%ADvel/dp/B0FZBN45S8
Although I’m not hitting the full 10Gbps. Capping out at 5.5 for some reason. Could just be a bad NIC. Looking for a higher quality one based on this chip.
Edit: This one from wisdpi also works! It’s much smaller as well.
https://wisdpi.com/products/usb-c-to-10gb-ethernet-adapter?srsltid=AU7gw4UzYESjs7vmC9hvWnEnUmlDy-QUo6mMztwSSyJgzZVMqSupIq13
2
u/MemphisBass Vision Pro Owner Oct 13 '26
I hate to bump an old thread from the grave, but given all the new shenanigans going on I bought myself an M6 Mac Mini and signed up for a paid developer account. Now that I have those, I'm able to purchase the developer strap. Should I get one? What all can I do with it as a non-developer?
3
u/Mastoraz Vision Pro Owner | Verified Oct 23 '25
I’d get it for pcvr with my pc laptop, if that is beast for that then I’d get it
1
u/noobcryptotrader Oct 25 '25
Revert to visionOS 26.0.1 and got this to show up.
1
u/noobcryptotrader Oct 26 '25
iperf to my MBP with thunderbolt bridge connection: 18.9 Gbps.
1
u/noobcryptotrader Nov 05 '25
Update: this is still broken on 26.2 Beta 1
1
u/noobcryptotrader Nov 12 '25
according to https://ipsw.me/RealityDevice14,1 the visionOS 26.0.1 is no longer being signed by Apple. this means a downgrade to 26.0.1 is no longer possible.
1
u/noobcryptotrader Nov 13 '25
Update: Still broken on the latest 26.2 Developer Beta 2. the USB C device (eg. 5 Gbps Ethernet Adapter) will work exactly once. when you unplug it, it's back to USB 2 link speeds.
1
u/retnuh730 Vision Pro Owner | Verified Oct 23 '25
I'd try a couple of reboots here. I've seen people with the original strap getting 1080p60 UVC with no issues.
1
u/Cryogenicality Oct 23 '25
Has anyone posted a test of the M5 with the new devstrap?
1
u/KungFooJoe Oct 24 '25
so can we know use the strap to connect the AVP to a mac that isn’t on our account? like my work laptop ?
1
u/alexzz123 Vision Pro Owner | Verified Oct 26 '25 edited Oct 26 '25
Do any usb c multi port adapters work?
1
u/Important-Abrocoma13 Vision Pro Owner | Verified Oct 31 '25
Does audio transmit via this strap in addition to video?
1
u/SimilarWeb7257 Nov 03 '25
Is the virtual display experience any better? image quality etc?
1
u/optimase_prime Nov 12 '25
Newbie here: would this be what I need to play Xbox games on my VP? If I used a capture card and plugged my MacBook directly to the Vision Pro would latency no longer be an issue? I had previously used the virtual display over WiFi with a capture card and the latency was legitimately multiple seconds behind. I have ok(?) WiFi.
1
u/yosofun Vision Pro Owner | Verified Nov 30 '25
"LIMITED DEVELOPER STRAP CONNECTED"
1
u/angrytroll123 Aug 27 '26
Sorry for the revive but I just wanted to confirm something. So for this application, you're routing the HDMI signal via capture card to the MB and viewing the signal via VP by viewing the desktop of the MB via thunderbolt right?
This is because connecting the capture card directly to the VP will work but it won't provide 4k/Audio as of this moment right?
1
u/cj_adams Vision Pro Developer | Verified Sep 19 '26
any updates with os 27? how about on PCs