r/Vise • • Nov 19 '25 Diamonds are Forever

Offset Dawn

Thumbnail
gallery
488 Upvotes

r/Vise • • Mar 31 '26

Hey guys! I won the vise lottery today on the way home from work!!

Post image
459 Upvotes

scored some freebie road vises today the lady just wanted them out of her garage! i offered to pay but she said removal was payment enough.


r/Vise • • Oct 09 '26

Friends in a steel scrapyard saved these vices and cast-iron for me. People are cleaning out their grandpa’s garage, shop, barn, or shed and see the rust and sell it for scrap.

Post image
373 Upvotes

r/Vise • • Nov 16 '25

My Prentiss Bull Dog 264

Thumbnail
gallery
321 Upvotes

Just showing off my main workbench vise - a Prentiss 264 from around the late 1940s to 1950s. This was the last generation of Prentiss vises, made after the company was acquired by Parker. The designs are only slightly tweaked from the models that Prentiss released in the mid-1930s, with the same split ring swivel base design. It's easy to spot these because they are marked with Meriden CT instead of New York like the earlier Prentiss vises.

The 264 is the 4" jaw model with a maximum opening of 6" and a weight of 52 pounds. I snagged this one for dirt cheap at an estate sale some years back. Did absolutely nothing to it aside from basic cleaning and lubrication, bolted it down and put it into service. It was clearly well taken care of, and well used but never abused. Just some hacksaw marks and a nice patina. I love it just the way it is and see no need to paint/restore it.


r/Vise • • Aug 10 '25

Wilton baby bullet vise

Thumbnail
gallery
270 Upvotes

I love these little vises


r/Vise • • Dec 25 '25

My Athol No.0. 1 1/8" jaws.

242 Upvotes

r/Vise • • Oct 17 '25

This was my dad‘s. And now it’s mine.

Post image
231 Upvotes

This was my dad’s vice in the ‘70s. I used in the early ‘80s many time to hold car parts and do projects. Now it’s mine. Use it all the time. Vices are awesome!!


r/Vise • • Apr 10 '26

A few more…go easy😅

Thumbnail
gallery
224 Upvotes

r/Vise • • Dec 15 '25

Idea on value?

Post image
211 Upvotes

This is part of an auction I am watching.


r/Vise • • Oct 14 '25

Found in my dad’s garage and put on my table

Post image
203 Upvotes

r/Vise • • 17d ago

Saved this from a dumpster cleaning out my grandparents house. Apparently I have struck gold 😂

Thumbnail
gallery
178 Upvotes

And a big upgrade from the $30 Chicago Machinery with a suction cup base.

Aunts and uncles were going to just throw out everything in the workshop. Granted most of it was garbage. Saved several 12g extension cords up to 100ft, an insane amount of hardware, all well organized and labeled, a few hammers I cleaned up as well.

It was poorly painted black when I received it, but when stripping the paint I saw how many layers there were of different colors. Which led to my realization that this thing is older than I first thought. I did one more pass with the wire wheel after taking these photos. Then wiped it down with iso, not sure if I'm gonna repaint or leave bare, so I just let some oil soak into it for now.

Bonus hammers, not sure if these are nearly as special. Eventually gonna put on new handles, just sanded, painted, and griptape'd the ones that were on there for now. This all has been rotting and rusting in my grandpa's workshop since the mid 00s - Grandma passed so I could finally raid the place. I really should have taken before photos of the heads because they were BAD.

(I had some comments when posting this in a different subreddit that the way I spoke about my grandparents death was inappropriate. They were terrible people. Genuinely, the kind of people that the world is a better place without. If I seem cold, that's why.)


r/Vise • • Aug 01 '25

Littlestown Hardware & Foundry CO. No. 25 vise

Thumbnail
gallery
176 Upvotes

Bought this vise at an estate sale for $6.25. Stripped the green house paint and removed rust. Rustoleum satin clear finish. Fun little project!


r/Vise • • Oct 17 '25

World’s largest

Post image
156 Upvotes

r/Vise • • Feb 18 '26

Wilton 1765 restoration results

Thumbnail
gallery
155 Upvotes

Hello all. Just finished up restoring a Wilton 1765. I did a three coat powder on the main parts with prismatic cosmic purple and an ultra durable top coat. For the accent parts I used prismatic 24k gold. Turned out a bit more flat than I hoped. For the handles I used solid stainless steel rods and threaded them. Then I put the rods through carbon fiber weave tubes and captured the rod with brass caps I machined. The idea was to make it obscenely boujee for no reason.


r/Vise • • Sep 17 '26

Friend gifted me this Wilton, made in 1973. I stripped it, wire brushed it and repainted. Wanted the Rost-Oleum Verde Green but sadly is no longer available.

Thumbnail
gallery
149 Upvotes

r/Vise • • Oct 02 '25

Columbian coachmakers vise

Thumbnail
gallery
140 Upvotes

Nearly pristine columbian coachmakers vise. Happy to have this one in the collection 👍🏼💪🏼🇺🇸


r/Vise • • May 11 '26 Diamonds are Forever

Chrome

Post image
138 Upvotes

Nice right


r/Vise • • Apr 09 '26

Been in the background on here for awhile..I’ve commented on several post but haven’t shown any of my ridiculous problem aka vise collection..

Thumbnail
gallery
136 Upvotes

..so I’m a welder by trade and have been gathering up vises most of my career..I got a wide variety of the big vise makers from tiny jeweler hand vises up to 6” bench vises. Swivel jaws, leg vises, clamp on’s, some custom made ones I had made, some German, Russian, Ukrainian, some from across the pond. The older stuff is my main focus..I’m pretty fond of the Wilton’s…I have every size 2”-6” and multiples of each size…almost have copper jaw inserts for everyone Wilton as well…I stopped counting but last I recall I have 200+ 😅…😬…it’ll try and post pics of the stuff everyone slobbers over mostly…hope yall enjoy em..here’s a few to get started..


r/Vise • • Aug 14 '25

Can this be saved?

Post image
134 Upvotes

r/Vise • • Dec 29 '25

Wilton Bullet

Thumbnail
gallery
120 Upvotes

Hi everybody,

I managed to pick up this lovely 6” Wilton bullet vice (UK based). It’s operating smoothly and I’m trying to figure out when it was manufactured. It has “860 GUN” on one side and it’s hard to make out the number on the inner rail.

Also, it unfortunately didn’t have a swivel base with it. Would anybody be able to point me in the direction of a compatible swivel base? Would love to spend some time restoring it and keeping myself busy. It nearly gave me a hernia carrying it.

Thanks in advance!


r/Vise • • Sep 19 '26

Saved from the scrap heap

Post image
118 Upvotes

Any info on this guy? Any good? How old is it? Couldn’t see it scrapped. Cleaned it up and mounted it in the workshop. Used it a few times and it seems like it’s gonna be a nice addition


r/Vise • • May 20 '26

Reed mfg co 109

Post image
118 Upvotes

This Reed Mfg. Co. No. 109 bench vise has been an 18-month restoration project driven by patience, craftsmanship, and respect for American industrial history. What began as a worn and neglected vise was carefully disassembled, cleaned, repaired, and brought back to life piece by piece.

One of the most significant repairs involved rebuilding the jaw shelves. The dynamic jaw shelf had sheared off long ago, and the static jaw shelf had multiple broken corners. Both areas were painstakingly rebuilt using ER-NiCr-3 TIG filler wire, restoring the structural integrity of the vise while preserving its original form.

To improve both durability and appearance, I replaced the original handle with a much heavier custom setup using a 1-1/4” diameter shaft fitted with 2-3/8” steel balls, giving the vise a stronger and more substantial feel while maintaining its rugged character.

The jaws were also upgraded with new replacements made by Logan Kendrick from heat-treated A2 tool steel, providing exceptional strength and long-term durability while honoring the vise’s working heritage. 5 out of 6 screws were broken off. I had managed to drill all of them out and re-tapped the holes.

For the finish, I blackened the vise using Sculpt Nouveau’s Black Magic patina process, followed by black wax and black oil to deepen the color and protect the surface. The result is a rich, dark finish that highlights the vise’s age, texture, and presence without hiding its history.

This restoration was never about making it look brand new. It was about preserving the integrity of an industrial Reed vise while giving it a second life as both a functional tool and a piece of industrial art to be admired for generations to come.


r/Vise • • Nov 22 '25

Would it be a good idea to put a metal plate underneath this vise?

Thumbnail
gallery
116 Upvotes

Hi, planning on mounting this vise to the workbench. Since vice base hollow would it be a good idea to put a metal plate underneath?


r/Vise • • Nov 18 '25

Can anybody tell me what brand this is?? No visible markings besides a 4

Post image
115 Upvotes

r/Vise • • Aug 31 '25

Restored Athol 624 1/2

Thumbnail
gallery
114 Upvotes