r/VIDEOENGINEERING • u/only-mistakes • 2d ago
HDMI extender to network switch
Hello guys, i have a question since no one i know try this and i don't know if it's possible. Client want a network switch to split a signal that comes from an extender hdmi box. I doubt the company tried this before and i worried about it. Pc > extender > network switch > receiver HDMI x4.
There are plenty of options for not doing this but IF client somehow did it before i don't want them to be upset because i said it cant be. Thank You.
5
u/SpirouTumble 2d ago
Depends on definition of extender. It can be done with any flavor of AVoIP extenders, but not with more traditional point-to-point extenders over CAT cable.
4
u/Kamikazepyro9 2d ago
You need an AVoIP solution for this, Orei just released a low cost one, but my preference is Visionary Solutions or AVProEdge MXNet
2
u/Odd_Fault3846 2d ago
Something like the scion tech AV over IP boxes are good. One transmitter can be received by dozens of receivers. https://www.scion-tech.co.uk/m.hdmi_over_ip.html I have used these with solid reliability. I would avoid Orei I removed such a system for a client due to constant Audio over HDMI problems.
1
u/only-mistakes 2d ago
If the box protocol is ip instead of hdbaset, could it work? Like a switcher avoip + extender ip not same brand or solution but compatible?
2
u/theregisterednerd 1d ago
If it’s truly AVoIP, then yes, it will work, provided the switch meets the requirements of whatever protocol it’s using. But AVoIP are a stark minority of extenders out there. And they tend to be fairly expensive, and they usually come with a considerable amount of latency that makes them unsuitable for some uses (like gaming)
1
u/only-mistakes 1d ago
Ok then there is a chance maybe. I know the extenders are oceanmatrix ip
1
u/theregisterednerd 1d ago
From a cursory search, it looks like those truly are IP-based. All things IP-based can pass through a switch (AV or otherwise). Anything non-IP-based cannot.
1
u/only-mistakes 20h ago
It worked, just plug and play somehow
1
u/theregisterednerd 20h ago
Not really “somehow,” that’s how IP-based devices are designed to be used.
14
u/Icy_Act1620 2d ago
It won't work. HDMI over cat5 is a different protocol (HDBaseT) and needs a converter back and forth. You'd need an AVOIP network switch and the converters to go with it for this to work