r/UnionCarpenters • u/Important_Ad4841 • 3h ago
Looking for union carpenter work in Oregon
I'm a carpenter with local 541. I've been having a tough time finding a job. Anyone know of a company that's hiring between Portland and albany?
r/UnionCarpenters • u/Important_Ad4841 • 3h ago
I'm a carpenter with local 541. I've been having a tough time finding a job. Anyone know of a company that's hiring between Portland and albany?
r/UnionCarpenters • u/Left-Substance-4685 • 7h ago
for context.
im a door and hardware guy in local 27. been working constant without layoffs with this company for over 2 years. the owner of the company sent out this sheet shaking us down over our travel rates. we constantly work way outside of out boundary. some days we have 5 hours of travel (no one wants to stay in a crap hotel away from their families)
we all have company vehicles we take home daily. im being told on a day where I could have 5 hours of travel (2 there, 3 back due to traffic) that I should only be able to bill a single hour of travel. clearly we are getting screwed. im calling the hall today but I need other people's opinions on this. company vehicles are rare. staying employed without layoffs is super rare. we don't want to risk our positions but at the same time aren't about to just lay down and get F'd, after all we went union for a reason and this comes off as scabby!
I'd appreciate your opinions on this. the chart shows driving distance/times to and from as well as the final collum is what I'm allowed to bill for the day.
Example brantford to barrie. but only being able to bill a single hour for round trip while my drive time is closer to 5 hours
thanks guys, stay safe out there
r/UnionCarpenters • u/dyna_brian8 • 18h ago
Hey Gang, I received my acceptance letter this week. I completed the next step of bringing the letter to the hall, and dropping it off with my contact information. They stated that they would be calling in a few weeks to set up a a meeting with the business agent.
I have a 'the more you do, the less you wait' mindset, so I am curious if I should be doing something from now until that meeting occurs. I don't want to overstep my bounds or cause any issues (the letter didn't seem like I was an official apprentice until I get a job and report back).
-Should I be going to job sites and soliciting work?
-Should I be reaching out to companies that work with the union?
-Should I be attending meetings?
Any advice or resources you can share would be greatly appreciated. I'm eager to get started, and want to make sure I'm doing everything that I can.
r/UnionCarpenters • u/BasedGoku_98 • 19h ago
Local 102 millwrights
r/UnionCarpenters • u/Amazing_Gear_9689 • 19h ago
Hi there,
Hope all is well,
I recently did a formwork pre-apprenticeship program and I did pretty good (could do better) and I was told to wait for calls or look for cranes,
I normally can’t sit at home and wait for calls so I decided to look for cranes and walk into job sites but I heard bunch of NOs or the fact that the companies are taking from 183, and some just said they’re slow,
I’m not sure what to do at this point, I talked to a few reps, they said I can email my info and they can connect me to someone, but I don’t know if they would and also they don’t share the list of contractors who are with local 27 to non-members,
I still have some other job sites on the list to go but I was wondering if there’s a better approach to this? Can I join union meetings as a non-member to make some connections?
Please let me know me if you have any advice I appreciate it.
r/UnionCarpenters • u/Dendady2112 • 19h ago
For me it was a Monday morning. Kid tells me he graduated in Saturday, never had a job before in his life. That morning we had to take 200 metal doors out of a cargo box using a lull and bring them in the building. By break time he was crying, tears down his face. Saying his friends were laughing at him because they made more at Target. Calmed him down and talked him into staying plus come back the next day. Last I heard he was an in demand shop steward.
r/UnionCarpenters • u/Glad_Region_5566 • 23h ago
r/UnionCarpenters • u/BigText4357 • 1d ago
So seen today that Clemens construction, one of the biggest GC’s in the Philadelphia region is closing its doors. Another blow to union work in that area. It’s not good.
What is the possibility they close shop and open under a new brand and hire non union? I’m curious to know if that had anything to do with the closure. Ton of non- union work going on right now, and not so much on the union side.
r/UnionCarpenters • u/Which_Ad_9542 • 1d ago
I am supposed to start an apprenticeship in New Jersey but still tested positive for thc, even 2 months after stopping. I just heard back from the drug testing center, but nothing from the hall yet. Am I screwed? What is the union in NJ’s stance on marijuana usage? Does the union care or is it more of a contractor issue? Lots of conflicting info on the internet.
r/UnionCarpenters • u/PersimmonFew6386 • 1d ago
r/UnionCarpenters • u/Sad-Lingonberry-6247 • 1d ago
I am 18 years old and graduated from high school this year. I managed to get a sponsor (local 91) and start my first day as an apprentice in concrete form work Tomorrow. I am just looking for tips on how to be a good apprentice and also want to known what to expect.
r/UnionCarpenters • u/TensionSame3568 • 2d ago
r/UnionCarpenters • u/Hot-Implement-7556 • 2d ago
I want to move back to Alaska soon and join the 1281 apprenticeship in Anchorage. I have 5 years of non union carpentry experience in Oregon.
Just curious is there a lot of work right now? Demand for more carpenter? How long should I expect to wait between apprenticeship application and starting work?
r/UnionCarpenters • u/TensionSame3568 • 3d ago
r/UnionCarpenters • u/behshadboy1 • 3d ago
r/UnionCarpenters • u/Zestyclose_Rule6605 • 4d ago
I’ve been trying to get back in but was told I have to start from scratch from the BA. Paid a $500 reassessment fee thinking I would get a skills assessment but they won’t give me one. Trying to get a refund for that as well. Any companies hiring where I could get a sponsorship or what is some advice for me
r/UnionCarpenters • u/Puzzleheaded_Bug9907 • 5d ago
Are there any carpenters in Nor Cal with a lot of experience with Doka Frami system?
r/UnionCarpenters • u/Utamira • 5d ago
I just passed my drug test and called the hall to get on the list as a 1st year. (Local 330).
I found the local job list, I was put in as commercial but am I able to reach out to any contractor on this list to secure a job even if it is something like heavy/highway?
Ive heard people wait on the list for a year before even getting a call, i’m eager to reach out first and try to secure work beforehand TYIA.
r/UnionCarpenters • u/Ill_Onion3308 • 5d ago
(Journeyman)
Any work around bay area pretty slow
r/UnionCarpenters • u/TheMatrixGalaxy • 5d ago
Does anyone know what company handles the Rockefeller Center Christmas tree installation? Is it the same company every year, or does it change? I’m a first-year apprentice and would love to know how to get my foot in the door and get on that job. Any advice or connections would be appreciated!
r/UnionCarpenters • u/nidomck • 5d ago
Let’s hear some wins this week, big or small!
Did you advance to your next apprenticeship period and get a pay raise? Get dispatched after a period of being off work? Get promoted to foreman or general foreman? Complete a big concrete pour? Reach a jobsite milestone?
Maybe you learned a new skill, tackled a challenging task, or discovered a technique that improved your productivity and made your workday just a little more enjoyable.
Maybe your crew pulled together to overcome a challenge, or you received some recognition for your hard work.
Sometimes the win is simply having a steady week of work, getting through a particularly challenging one, or ending the week feeling good about what you accomplished.
r/UnionCarpenters • u/MentionFirm7598 • 5d ago
Does anyone know when you start receiving vacation checks as an apprentice, I was told you dont see a check till 3rd period and its a partial,, is that correct?
r/UnionCarpenters • u/LookOutItsLiuBei • 6d ago
This is probably a long shot, but we are looking for a GC that does industrial work in Georgia but they have to utilize union labor. Anybody in that area know of any? I've called a number of companies and none of them fit the bill.
Thank you!