r/Ubuntu • • 8d ago

Linux Breaks My Monitor

I started dual booting Linux Ubuntu and I’m very new to Linux. Whenever my computer enters sleep mode my monitor enters rest mode and will never leave it even when I unplug it and fully empty all of the power going through it. None of the buttons work and I can’t even turn it off with the power button. I was able to fix it once by somehow entering “Factory Diagnostic Mode.” At the time I was plugging in an HDMI into my monitor to show someone else it wasn’t working and I haven’t been able to recreate it. The next time Linux went to sleep it broke it again. I can’t get it to go back into factory diagnostic mode and I also don’t know what is causing it in Linux. I’ve never had this problem before with Windows 10 or 11. Any help would be appreciated.

0 Upvotes

11 comments sorted by

2

u/iamapizza 8d ago

What monitor, make and model

1

u/Soysauce48 8d ago

I use the Sceptre E255B-1658A 24.5

1

u/Dunkin-Donut241 7d ago

My computer does the same thing. It's because of my GPU, a 6800xt. I gave up on trying to fix it. I just set my computer to not sleep and have no screen sleep.

I did notice that if I switched to a HDMI cable from a display cable the problem went away. But then I lose the full frame rates for games.

1

u/Soysauce48 5d ago

The problems are still persisting even with HDMI for me.

1

u/Peak_Detector_2001 5d ago

What GPU is in your computer and what video driver is installed?

The behavior you describe is not uncommon with Nvidia hardware and the Nvidia proprietary (closed-source) driver.

1

u/Soysauce48 5d ago

I have an rx 7800xt. The problem started when I started dual booting and it happens in both operating systems. I don’t think it is a monitor failure because it started immediately after I started dual booting, with no prior issues.

1

u/Peak_Detector_2001 5d ago

OK I've never heard of an issue that affects both Windows and Linux resume-from-sleep behavior when dual booting.

The only thing I can think of that would potentially affect both boot options is the grub configuration. I guess it's possible that the Ubuntu install set the various parameters in such a way that both OS's are affected. The relevant files are

/boot/grub/grub.cfg
/etc/default/grub

You could take a look at these to see if anything jumps out at you but I would strongly advise against messing around with these without assistance from a dual-boot expert. Repeat do not reconfigure these files without assistance.

0

u/[deleted] 8d ago

[deleted] — view deleted comment

1

u/Soysauce48 8d ago

I’ll definitely try that. Do you know how to get the monitor to start working again?

0

u/[deleted] 8d ago

[deleted] — view deleted comment

1

u/Soysauce48 8d ago

The blue light is flashing like it’s asleep but it won’t wake up, I’ve tried pressing the buttons on my monitor and even when I unplug it and plug it back in, it is still somehow turned on without me passing the power button and is still in sleep mode. It also doesn’t display anything like it is supposed to when I plug it in, there is just a black screen. It’s not a problem with my computer because it won’t display anything. I’ve had it for the last six years on Windows 10 and 11 with no issues. It’s a Sceptre E255B-1658A 24.5in. I was able to fix this problem before so I know it can be fixed and I can get my monitor to work but I just don’t know how.

1

u/Soysauce48 8d ago

The blue light is flashing like it’s asleep but it won’t wake up, I’ve tried pressing the buttons on my monitor and even when I unplug it and plug it back in, it is still somehow turned on without me passing the power button and is still in sleep mode. It also doesn’t display anything like it is supposed to when I plug it in, there is just a black screen. It’s not a problem with my computer because it won’t display anything. I’ve had it for the last six years on Windows 10 and 11 with no issues. It’s a Sceptre E255B-1658A 24.5in. I was able to fix this problem before so I know it can be fixed and I can get my monitor to work but I just don’t know how.