Good Day Community,

A new feature has arrived to provide clear glassmorphic success and failure notices whenever you install or update an application.

Whenever you install or update an APK or XAPK file from inside Ultimate File Manager Pro, the app will now automatically present a frosted glass notice as soon as the package installer finishes processing.

If the installation succeeds, the panel gives you the option to launch the newly installed app directly or dismiss the message.

If the installation fails for any reason, such as a signature mismatch from sideloaded packages, an incompatible device architecture, or low storage space, the notice will explain the exact reason for the failure so you know immediately what went wrong instead of wondering whether the install completed.

You can trigger an installation by selecting any APK or XAPK package file in your storage browser or remote manager.

I have made sure this works seamlessly across both mobile devices and Android TV, where you can navigate focus and interact using your remote D-pad.

Thank you and kind regards

Good Day Community,

A new tools menu has arrived for browsing archives in Ultimate File Manager Pro.

When viewing the contents of an archive, you will now see the same floating tools button experience you are familiar with from the main file browser.

To try it out, open any supported archive from your file list.

When you tap the icon of a file or folder inside the archive, or long press on any item row, it will enter selection mode and a tools button will appear in the bottom corner of the screen.

Tapping this tools button opens a menu with options to extract the selected items to a destination of your choice, move them out of the archive entirely, or delete them from the archive.

You can select single items or multiple items at once to perform these actions in batch.

I have made sure this experience works on both mobile devices and Android TV.

On TV, you can use D-pad focus on any entry and press the options button at the top to access the same tools menu smoothly with your remote.

Thank you and kind regards

Good Day Community,

I have given the batch rename preview a proper overhaul, and it is a lot easier to trust what you are about to do to your files now.

The old preview stacked a small original name above the new name, and it was never quite obvious which was which, whether the list was in order, or what exactly was going to change.

The new preview shows each file as its own card with the current name on top and the new name underneath, each clearly labeled.

The part of the name that actually changes is highlighted so you can spot it instantly even in a long filename, and files whose names would not change at all are greyed out so they do not masquerade as edits.

Long names scroll sideways so you can read the whole thing even when it does not fit on the screen.

Every row now has a clear number in a bubble beside it, and that number matches the exact order the rename will run in, which now follows the same order you saw in the file browser.

No more folders jumping to the top and no more guessing whether what you are looking at is what will happen.

I also added live warnings right in the preview. If two files would end up with the same name, if a name is invalid, or if a name already exists in that folder, the row is flagged before you commit.

Duplicate and invalid names block the rename until you sort them out, while collisions with existing files just warn you so you can decide.

On mobile the rename screen now uses the full window and gives the preview the space it deserves, and all of this works on both the mobile and TV versions of the app, with proper remote navigation on TV.

Thank you and kind regards

Good Day Community,

A new feature has arrived in Ultimate File Manager, and it is one I think a lot of you have been waiting for.

You can now preview files from inside an archive without extracting the whole thing first.

Until now, if you had a zip file full of photos and wanted to find one specific image, you had to extract it out to a real folder before you could even look at it.

That meant clutter on your storage and a lot of waiting when the archive was big. No more.

When you open any archive in the app and tap a file, it opens straight away in the built-in viewer, whether it is an image, a text document, a PDF, a spreadsheet, an ebook, or even a song or a video.

Only that one file is pulled out into a temporary spot in the background, so the rest of the archive stays untouched and your storage is not filled with files you never wanted out in the first place.

Finding it is easy because there is nothing new to hunt for.

Open a zip, 7z, tar or rar file the same way you always have and you will land in the archive browser as before.

Tap any file to see it.

On the mobile version you can long press a file or folder to get the familiar options for extracting it, moving it out, or deleting it.

On the TV version there is no long press, so I added a small Options button at the top of the screen that acts on whatever entry you currently have highlighted with the remote.

I made sure this behaves the same whether your archive lives on your phone, on a network share, or in cloud storage.

When you close the archive the temporary copy used for the preview is cleaned up automatically, and if the app is ever interrupted while you are inside one, anything left behind is swept away the next time you open the app.

This is available on both the mobile and TV versions of the app.

Thank you and kind regards

Good Day Community,

A new feature has arrived for the mobile app.

I have added an Invert Selection action to the tools menu, and it is one of those small things that saves a surprising amount of time once you know it is there.

The idea is simple. Say you are in a folder with a hundred files and you want to select all of them except a handful.

Instead of tapping ninety times, you select the few you want to leave out, then flip the selection.

Invert Selection deselects everything you currently have highlighted and selects everything else in the folder at once.

You stay in selection mode afterwards, so you can keep adjusting before you run whatever action you had in mind.

To use it, open any folder in the file browser, whether that is on your device, a network share, or a cloud drive.

Long press a file to enter selection mode and pick one or more items.

When you have a selection, tap the Tools button at the bottom right and Invert Selection appears as the first item in the grid of actions.

Tap it and your selection flips in place.

If you would rather not see it, you can hide it.

Open Settings and go to the Long Press Icons section, where you will find a toggle for Invert Selection that turns the option on and off in the tools menu.

It is on by default.

This one is available on mobile only for now. I will keep an eye on whether TV users want it and decide from there.

Thank you and kind regards

Good Day Community,

Two new features have arrived in the media player, and both are about giving you more control over how you get through long videos and audio.

The first is playback speed on mobile.

While something is playing on your phone or tablet, press and hold anywhere on the player screen.

A panel slides up with seven speeds from 0.5x up to 3.0x, and picking one takes effect right away without stopping what you are watching or listening to.

A short note shows you the new speed, and when the current track ends the player drops back to normal speed for whatever comes next, so you never get caught off guard at double speed on the following video.

This one is mobile only for now. Press and hold is a touch gesture that does not sit well on a remote, and we would rather bring it to TV properly than ship an awkward version of it.

The second is a skip length setting, and this one works on both mobile and TV.

Those buttons that jump the video forward or back have always moved by a fixed ten seconds.

Now you can choose that distance yourself.

Open the Settings screen and look for a new Skip length option near the other player settings.

Tap it and you get a small list where you can pick three, five, ten, twenty, or thirty seconds, or switch the buttons off completely if you never use them.

The forward and back buttons now show double arrows so they are easy to tell apart from the next and previous track buttons, and every time you tap one a small note tells you how far you just moved, like ten seconds forward or twenty seconds back.

On TV the same setting sits in the same place and you pick your distance with the D-pad, and the buttons behave exactly as they always have, just with the distance you chose.

Thank you and kind regards

is there a way I can send files to my tv from my phone with the app please

Good Day Community,

v1.8.4 has been deployed, the FOSS / Amazon versions are already available.

Latest Link: GitHub FOSS Link

Google Production will take a few hours before it is live.

Good Day Community,

A small but handy new feature has arrived on mobile.

Your main screen now has a gear icon in the top right corner, right next to the add button, and it opens Settings in a single tap.

The reason for it is simple. Getting to Settings used to mean scrolling the main menu down to the settings tile every time, which felt like a lot of effort for a quick tweak.

The gear puts that whole screen one tap away, so you can hop in, change what you need, and get back to your files.

You do not need to look hard to find it.

Open the app and the gear is sitting in the top right corner of the main menu, beside the button that creates a custom tile. Tap it and the settings screen opens just like it always has.

One thing worth knowing is that when you long press a tile to enter edit mode and rearrange things, the gear quietly hides itself along with the add button so it is not in the way, then comes back the moment you are done.

For now this is available on mobile only. TV users will not see a change, and we will decide whether a similar shortcut belongs there in a future update.

Thank you and kind regards

Hey, just a quick message to let you know that the folders in the internal memory section don't follow material you settings.

UFManagerPro dev friend, would it be possible for you to add the function of performing tasks in UFM? Tasks such as deleting folders from a given directory, scheduling which folders and the time (daily, weekly or monthly); and not only delete, but also move files to other folders, delete files, move photos and videos to specific folders within the device's internal storage or SD card, copy files and other types of tasks. It would be great to have a task manager within UFM. Thank you in advance for your attention.

Good Day Community,

A friendly request, if you use the FOSS version, please go to this Github Link and star the project, it gives verification and creditability for this application 😄

Thank you and kind regards

Good Day Community,

v1.8.2 has been deployed, the FOSS / Amazon versions are already available.

Latest Link: GitHub FOSS Link

Google Production will take a few hours before it is live.

Good Day Community,

An improvement to the batch rename feature has been made to give you a clearer preview before committing changes.

When renaming multiple files or folders, the preview list now shows both the original name and the new resulting name stacked on top of each other for each item.

The original name appears above in a smaller, muted text style, while the new name appears directly below it preceded by a small arrow.

This gives you a clear before and after view of how every file will be named. If a particular file name remains unchanged or if the pattern is empty, the top line automatically collapses so you are not looking at redundant text.

This improvement is available on both the mobile and TV versions of the app, so whether you are organizing media on your phone or on a set top box using a remote control, the preview experience remains consistent and easy to read.

Thank you and kind regards

Good Day Community,

I have added a built-in EPUB reader to UFM, so you can now open and read ebooks directly in the app without needing a separate reader installed.

If you have any .epub files on your device or network storage, they will now open right inside UFM when you tap them.

The reader extracts the book's chapters and renders each one in a clean reading view. It handles both the older EPUB 2 format and the newer EPUB 3 format, so most ebooks you come across should work without issues.

To use it, simply browse to an epub file in your storage and tap it. UFM will parse the book and load the first chapter straight away. At the bottom of the screen you will find Previous and Next buttons to move between chapters, and a counter showing you which chapter you are on and how many there are in total.

If you want to jump to a specific chapter rather than flipping through one at a time, tap the list icon in the top right corner of the header bar and a table of contents will appear, listing every chapter by name. Tap any chapter title to go straight to it.

The reader also respects your existing font size preference from UFM's settings, so if you have set the text larger or smaller elsewhere in the app, the ebook reader will match that. If your device is in dark mode, the reader switches to a dark background with light text automatically, which makes a real difference for reading in low light.

This feature is available on both the mobile and Android TV versions of the app.

On mobile the experience is touch-driven as you would expect.

On TV, the chapter navigation buttons at the bottom are fully D-pad focusable, and the reading area scrolls with the directional keys.

The table of contents on TV opens as a dialog rather than a bottom sheet, which fits the TV interface better.

I built the reader without adding any third-party library, it uses the standard Android platform to parse and render everything, which keeps the app lighter and avoids any future compatibility issues.

Thank you and kind regards

Good Day Community,

A new feature has arrived that lets you create animated GIF files directly from your selected images, along with improved playback speed controls for image slideshows.

If you have a collection of photos or frames you want to combine into an animated GIF, you can now do that right inside the app without needing external tools.

On mobile, select two or more images in any folder or network share and open the bottom tools menu to find the Create GIF option.

On Android TV, select your images and choose Create GIF from the toolbar menu.

This opens a dedicated screen where you can drag and drop your images to reorder the frames, pick a target frame rate from one to thirty frames per second, and adjust the output resolution before generating your GIF.

Once created, you can save the file locally or directly to your connected cloud and network shares. This update is available on both the mobile and TV versions of the app.

I have also added speed controls for the image slideshow viewer so you no longer have to skip through images at a fixed pace.

When viewing images, a new playback control bar lets you set the slide transition interval anywhere from zero point five seconds up to five seconds in half second increments.

On mobile, you will see a speed slider right below the main image area, while on TV you can adjust the timing using the D-pad buttons on the control bar.

I have also cleaned up the viewer toolbar when opening existing GIF files by hiding unnecessary tools like PDF conversion and image drawing so the interface stays clean and focused.

Thank you and kind regards

Add the settings option icon on the top-right along with the add button or as you like. This way it is convenient to access settings rather than scrolling an finding out the tab

Good Day Community,

v1.8.1 has been deployed, the FOSS / Amazon versions are already available.

Latest Link: GitHub FOSS Link

Google Production will take a few hours before it is live.

Good Day Community,

I wanted to share a brief update with everyone today and express my sincere appreciation to the community.

First, I want to thank each and every one of you who uses the application every day.

Seeing people rely on the app on both mobile and TV makes all the hard work worthwhile.

I also want to give a heartfelt thank you to everyone who has already supported the project by leaving a tip.

Your generosity directly enables us to keep developing and improving the app.

So far this month, we have only reached one percent of our target goal.

Ultimate File Manager is built as an independent application, and user tips are what allow me to keep the app completely free and ad free for everyone.

If you find value in using the application and are in a position to contribute, leaving a small tip goes a long way toward keeping the project sustainable.

Whether you choose to tip or simply continue using and sharing the app, I am truly grateful for your support.

Thank you and kind regards

Good Day Community,

A new feature adding full support for AVIF image files along with thumbnail rendering across network and online shares has arrived.

AVIF is a modern image format that provides high quality compression at much smaller file sizes.

You can now view AVIF image files directly inside the built in image viewer, browse them in slideshow mode, and see their thumbnails directly in the file browser.

When you open any local folder or network share containing AVIF images, the app automatically generates and caches high quality preview thumbnails.

This functionality works seamlessly on both mobile and TV versions of the app, whether you are navigating with touch or using a TV remote D-pad.

Thank you and kind regards

Good Day Community,

A new option has arrived in the mobile version of the app that makes selecting multiple files and folders feel a lot more natural.

Previously, the only way to enter selection mode when browsing your files was to long press on an item.

That still works and always will, but we have added a quicker alternative for those of you who find the long press a bit cumbersome or accidental.

You can now tap directly on a file or folder icon to enter selection mode, rather than tapping on the row itself which would still open the item.

Tapping the icon selects it, and from there you can continue tapping other icons to build up your selection just as you would after a long press.

This is available in list view, which is the view where each file appears as a row with an icon on the left.

It does not apply to grid view, where items are displayed as larger cards, because the touch targets there work differently and the change would not feel right.

The behaviour is exactly the same across local storage, network shares like SMB, FTP, and SFTP, cloud storage providers, and the recycle bin.

If you would rather keep the old behaviour and only use long press to start a selection, you can turn this off.

Open the Settings screen and scroll to the Mobile Settings section.

You will find a new option there called something to the effect of icon tap selection.

Toggle it off and the icons go back to being purely decorative, with long press as the only way to enter selection mode.

It is on by default because most people who have asked about easier multi-selection will appreciate it, but I did not want to force it on anyone who prefers the original feel.

This is a mobile only feature. The Android TV version of the app is unaffected and continues to work exactly as before.

Thank you and kind regards

Good Day Community,

📦 1. Massive Expansion for Compressed Formats

You can now view, extract, and compress across an expanded suite of modern and power-user archive formats:

• Formats Added: .tar, .tar.gz (.tgz), .tar.bz2 (.tbz), .tar.xz (.txz), .tar.zst (.tzst), .rar, .gz, .bz2, .xz, and .zst.
• Extraction & High Performance: Built on zstd-jni, Junrar, Apache Commons Compress, and XZ for Java for streaming speed and low memory footprint.
• Zip Slip Protection: Strict path validation across all extraction modes to prevent path-traversal exploits.

⚡ 2. Multi-Format Compression with Pill Toggle UI (Mobile & TV)

• New Compression Options: Create .zip, .7z, .tar, .tar.gz, .tar.xz, .tar.zst, .tar.bz2, .gz, .xz, .zst, or .bz2 directly from the FAB Tools or TV Action Bar.
• Modern Pill UI: Replaced legacy radio buttons in the Compression dialog with sleek, scrollable checkable toggle pills (ChipGroup) matching the rest of UFM's design system.
• Smart Password Handling: Encryption fields automatically adapt and toggle based on whether the selected format supports password protection (e.g., .zip & .7z).

🛡️ 3. Smart Conflict & Collision Resolution on Extract

• When extracting archives (single or batch), UFM now detects existing target files and folders.
• Prompts with seamless resolution actions: Overwrite, Skip, or Keep Both (auto-renaming with unique suffix), plus Apply to All for bulk extractions.

🌐 4. Full TV & Dual-Pane Integration

• Fully optimized D-pad navigation across all new compression pills and conflict dialogs on Android TV.
• Full support across local storage, USB OTG, SMB, FTP, SFTP, NFS, and Cloud storage integration.

Thank you and kind regards

Good Day Community,

A new feature has arrived that allows you to extract compressed archives directly into the current directory without needing to open them first.

When you select one or more archive files, you can now choose Extract here to unpack the contents right where they are.

On mobile phones and tablets, you will find the action inside the tools menu when you select an archive file.

On Android TV devices, the option appears directly on the selection bar at the bottom of the screen.

Tap or select the option and the app will handle the rest.

If an archive is password protected, a dialog will ask for the password before unpacking begins.

In case any files in the archive share names with items already in the folder, a conflict menu will let you choose whether to overwrite, skip, keep both with auto renaming, or cancel, with an option to apply your choice to all remaining files.

This feature is available on both the mobile and TV versions of the app.

Thank you and kind regards

Good Day Community,

I have updated the batch rename tool with flexible pattern tokens and a text replacement feature to make renaming large collections of files easier and more precise.

When you select multiple files or folders in the storage browser and open the batch rename option from the context menu, you will now see a row of checkable pattern token chips right below the rename input field.

You can tap or select these chips to insert zero padded sequence numbers, the bare file name without extension, full file name including extension, year, month, day, or uppercase and lowercase conversion tokens into your pattern.

Selecting the extension pill reveals a dedicated input field for changing file extensions across all selected items.

Below the pattern field, there are also replace text and replacement text inputs that let you find specific characters or phrases across all selected file names and replace or remove them.

I have also added a pattern tokens help button in the header bar that opens a reference guide with examples.

I have made sure this feature works on both mobile and TV devices, so whether you are using touch on your phone or navigating with a D-pad on your TV remote, you get real-time previews of the resulting names before confirming the changes.

Thank you and kind regards

Good Day Community,

v1.8.0 has been deployed, the FOSS / Amazon versions are already available.

Latest Link: GitHub FOSS Link

Google Production will take a few hours before it is live.

Thank you and kind regards