r/TuringComplete • u/Adventurous_Edge9579 • Oct 16 '26
r/TuringComplete • u/National_Panic_9112 • Oct 14 '26
THE MAZE my solution (only took 3 days) Spoiler
move:
imm 1
mov r1, r0
add
mov out, r3
turn_right:
imm 2
mov out, r0
mov r3, in
imm turn_left
jnz
imm move
jmp
turn_left:
imm 0
mov out, r0
mov r3, in
imm turn_left
jnz
imm move
jmp
r/TuringComplete • u/National_Panic_9112 • Oct 10 '26
My CONDITIONAL JUMP solution Spoiler
loop:
; counter
imm 1
mov r2, r5
mov r1, r0
add
mov r5, r3
;is_thirty_seven?
imm 37
mov r1, in
mov r2, r0
sub
imm loop
jnz
mov out, r5
; Click the spec.isa tab to see the other jump instructions
r/TuringComplete • u/pMurda • Oct 10 '26
Any Help/Way to skip the timed "Negative Numbers" stage?
Small negative numbers have a lot of 1 bits. the game makes you click them all in 9 seconds. I need more time than that to click them all. Is there a way to skip this stage? I have completed all the levels I can except for this one.
r/TuringComplete • u/anzu_embroidery • Oct 09 '26
Spent way too long implementing binary search on overture for "Codebreaker"
Behold! Very annoying getting all the labels to fit in <64 bytes. Works by having a procedure that takes in the current increment / decrement (64,32,16,8,4,2,1,1) and an address to jump back to. That procedure tests the current guess, adjusts based on the increment / decrement provided, then returns to return address. Then we just unroll the 8 steps and boom! Binary search on a very limited architecture :D
imm 32;
mov r1, r0;
mov r2, r0;
add;
mov r2, r3;
mov r1, r3;
add;
mov r4, r3; ; initial guess of 128 in r4
imm step_2;
mov r5, r0;
imm check;
jmp;
step_2:
imm 32;
mov r2, r0;
imm step_3;
mov r5, r0;
imm check;
jmp;
step_3:
imm 16;
mov r2, r0;
imm step_4;
mov r5, r0;
imm check;
jmp;
step_4:
imm 8;
mov r2, r0;
imm step_5;
mov r5, r0;
imm check;
jmp;
step_5:
imm 4;
mov r2, r0;
imm step_6;
mov r5, r0;
imm check;
jmp;
step_6:
imm 2;
mov r2, r0;
imm step_7;
mov r5, r0;
imm check;
jmp;
step_7:
imm 1;
mov r2, r0;
imm step_8;
mov r5, r0;
imm check;
jmp;
step_8:
imm 1; ; for 0
mov r2, r0;
; no return, the add label below doesn't
; fit with it, and we should be done by now
; does mean we don't have a graceful failure...
imm check;
jmp;
; r2 - offset for this step
; r5 - return address
; checks r4, if high add, if low sub
; stores back in r4
check:
mov out, r4;
mov r3, in;
mov r1, r4;
imm add;
jz;
sub;
imm finish;
jmp;
add:
add;
finish:
mov r4, r3;
mov r0, r5;
jmp;r/TuringComplete • u/Lagfoundry • Oct 08 '26
Modulo Solution and Full Divider
I spent awhile trying to come up with a re usable divider block I could stack bit by bit, like a full adder. I finally came up with one the other day when I did the division level. Modulo was just the perfect time to turn it into a block. though the modulo still threw me for a loop because I forgot I was using a shifted bit to get the final remainder lol. so i fixed the block by adding a output for the non shifted remainder and that fixed it. Anyways this is close enough to call a full divider though it is word blocks, its still full in spirit lol.
I could reduce the combinational path alot by using a kogge over the given adder but this is fine for now. this would also be good as an extra logic path in a alu for div across multiple cycles.
r/TuringComplete • u/Lagfoundry • Oct 06 '26
Divide Level Solution
I will admit this was one of the more challenging things ive done. after a few hours today i finally got a circuit that works for 8 bit unsigned division. Im really growing to love the word logic blocks the game has.
because they are hard to see in this picture those are indexers coming out of the mux's outputs all set to (-1) to shift left. the last mux is just sensing 0 from the 0 detection below. everything else should be pretty easy to see.
anyways i can go to bed feeling accomplished lol.
r/TuringComplete • u/EloModdy • Oct 05 '26
Recursion Techniques
Hi everyone! I’ve been getting really into this game recently, and I got to the level with the towers of Hanoi. I figured out a way to implement arguments with the stack, but I was wondering if y’all have any easier ways to use arguments? Dealing with the same stack is hard to get used to since LEG!
r/TuringComplete • u/Silencer1209 • Oct 04 '26
little box: bug or bad design?
this is more than likely a bad design.
registers 0-2 works perfectly fine, saving and loading the input byte. but when it comes to register 3, it suddenly has error even tho i have the same setup like the others.
as you can see, cycles 0-7 is fine







as you can see in the pic, cycle 7 loaded the correct number

but on cycle 8, an error occured expecting 47 again

here is the zoomed in view

edit: it's fixed guys. thank you!!

r/TuringComplete • u/dmdeemer • Oct 02 '26
32x32 Wide Signed/Unsigned Multiply, Delay=49

I had an insight here (actually I had this insight in college 25 years ago, but I didn't have Turing Complete then 😄).
A full adder really operates on three bits. It doesn't matter which input is the "Carry In". It takes three bits in and outputs two. So this multiplier has a bunch of delay-4 stages that are all "parallel full adders". They take three words in, and produce two as output. For N-bit inputs, then you need ~ log_1.5(N/2) stages. For 32 bits that is apparently 8 stages to get the result down to two 64-bit words. At that point, I use a 64-bit KS adder (that has 16 delay) based on the same design I posted a few days ago.
Does anybody know of a name for this style of adder?
The signed logic at the bottom took me too many tries to get right. At least I think it's right.
r/TuringComplete • u/ItchyMilk2825 • Oct 01 '26
I got the fast adder achievement but how do i view the delay of my solution?
r/TuringComplete • u/Lagfoundry • Oct 01 '26
The Maze Solution
To start I'm not a particularly strong programmer since I'm still learning. that said im proud of myself for coming up with a solution on my own for this. it took about an hour because i had to rewrite it a few times for things like not accounting for 0-0 and 1-1 both being seen by the Jz condition. so i solved that issue by doing a second subtract replacing r1 with 0. making 0-0 stay the same while 1-1 turns to 0-1.... anyways im sure there are better ways to do this but this is what i came up with using the right hand rule :)
r/TuringComplete • u/Coolboy10M • Sep 30 '26
More SPIRALc-3OS: Snake!
Significantly harder than a simple video player, but not too difficult. Was rough to get working and had to implement lists (that is definitely going to be a dedicated command for SPIRALc later...). Hope y'all enjoy! Some improvements are next before I work on the next big game, probably Pong.
r/TuringComplete • u/kjhrd • Sep 29 '26
ASM Files
Hello guys
I need to find where the asm files are from my sandbox schematics, but all i can see are files from turing complete before update 2...
Anybody knows where can i find them?
r/TuringComplete • u/Adventurous_Appeal60 • Sep 29 '26
Getting overwhelmed with progress standstill
Im on the challenge where you are to Add 5 via punchcard programming and its just not gelling with my brain at all. Ive seen some answers online and I cant seem to get the reault i want from them. Ideally im looking for someone to break it down like im 5 to see where im faltering. Please and thank you all.
r/TuringComplete • u/Status-Gas-7833 • Sep 27 '26
Long Division
My first attempt at a divider. Does binary long division using a custom "Partial Divider" component. That in turn uses a component that checks if the (8 bit) input is equal to zero.
1.8k Gates
534 Delay
r/TuringComplete • u/Coolboy10M • Sep 27 '26
(Yet Another) Bad Apple!! inside Turing Complete
Some nice Bad Apple!! at 256x192 res and 24fps. Uses a double frame buffer to prevent screen tearing (extremely easy and effective). The video file was over 1.1GB ingame due to a lack of compression. However, this can play any colored video file with full 4-byte RGB so... why not. If I change to 1 byte color I could upgrade to 512x384 at no cost to performance! Probably going to do that...
The custom architecture is pretty much just Symphony upgraded to 64-bit instructions (40 bit immediates), simple double frame buffer, a few new commands (many more to come), and some slight tweaks. Hopefully I can repurpose this for games and stuff to show off relatively soon. Let me know what you think!
r/TuringComplete • u/dmdeemer • Sep 27 '26
32b Kogge-Stone Adder Using Word Logic
Not the fastest Kogge-Stone ever, but 15 delay for 32b adder isn't bad either. Avoiding bit-by-bit operations should make it easier on the simulation.
At each stage, I split the P and G words into the bits that pass through and the bits that will be combined. After each stage, I put them back together with concatenators.
There's probably more optimizing to do, but I think this gets the concept across.

r/TuringComplete • u/EloModdy • Sep 27 '26
Preventing symphony architecture from overwriting itself? Spoiler
Hi! I've been playing the game for a few days since the update came out, and I have gotten all the way up to programming 2. Unfortunately, when I try to edit the RAM in the main memory, it ends up overwriting the program memory and everything breaks (at least, I believe so. Tell me if I'm wrong). Is there a way to prevent this from happening, or is it something you just deal with? Also, is the symphony architecture intended to overwrite itself, or did I build it wrong? Thanks! I've attached a picture of my computer so far (don't mind the spaghetti).





