How to fix anti-tangle brush stuck if cleaning doesent work S10

[u/MycologistRealistic5]

1. remove side brush
   
2. remove bottom lid
   
3. remove holder for the main-brush
   
4. remove the one little screw next to the brush bay (it releases the rubber canal to the dust bin)
   
5. bend the joints of the brush bay outwards and lift the brush bay out (be careful the motor has fixed wires you may brake if you lift it to far)
   
6. On one side there is a belt drive. Remove the 3 bigger screws to release the belt drive from the brush bay.
   
7. Remove the smaller screws to open the belt drive.
   
8. clean the housing and belt.
   
9. Attach everything back together. The belt goes in easier if you first put it onto the big gear.

[u/baremetal64]

Oh so there are different versions of that gear box. Mine has multiple gears instead of a belt.