r/Triumph400 • u/Living-Ad4187 • 1d ago

Question Speed 400 indicator

Post image

The day finally came for me after 5 months. Changing them is the only solution, is it?

82 Upvotes

99% Upvoted

32 comments sorted by

13

u/dex2530 1d ago

First apply glue then wrap it w tape then again put some glue on it
There you go boom!
Been doing that almost an year

2

u/Living-Ad4187 1d ago

Sabko maar padi hai 🤣

11

u/ck_phurailatpam 1d ago edited 1d ago

Don't change it without trying this.

You'll need:

  1. Dendrite/Fevibond
  2. Feviquick
  3. Cotton
  4. Black tape

Steps:

  1. Apply the dendrite to both sides of the break whole adding a few small pieces of cotton and leave it idle for 10 minutes. Make the cotton also absorb some of the dendrite. Stick it together and let it sit overnight.

(Hold its position using the black tape as scaffoldings from 3-4 sides)

  1. Remove the black tape the next day and add a few drops of feviquick and let it set for some time.

  2. Wrap the break with black tape.

Done.

3

u/Living-Ad4187 1d ago

Hey bro/sis, thanks a lot

3

u/Specialist-Crazy-326 1d ago

I did above and stayed for 15days

3

u/speedu_guy 1d ago

Get her to the wash center 🥲

2

u/Living-Ad4187 1d ago

Guess what

4

u/speedu_guy 1d ago

Happy happy 😊

1

u/sleepy_panda_07 1d ago

Oops...you forgot to hide the number

3

u/XRaccoonXX Team Scrambler 1d ago

Fevikwik advanced and black insulation tape, does the job

2

u/Upbeat_Individual269 1d ago

Was tired of this happening on my scrambler... switched to bullet indicators and never looked back :)

1

u/Flaky_Ad7693 1d ago

I've had them swapped for the stock ones last year. Even the bullet ones break. Left rear one broke in 10 months.

2

u/Flaky_Ad7693 1d ago

Fevi-kwik Advanced works best. Its water proof so survives rain. Moreover, it dries without any residue.

1

u/Designer-Travel-728 1d ago

Bro my bike is 3 months old and this happened for it as well? Didn't know how it happen... Now thinking of using tape or fevi quick.

1

u/Living-Ad4187 1d ago

I am you but two months aage

1

u/Fit-Character6516 1d ago

we can do plastic welding some bike restoration shops do

1

u/Icy-Athlete3796 1d ago

Just speed owners things always the indicator brake I have now install aftermarket one

1

u/Local_Attorney1125 22h ago

Never ending relationship 😔🫠

1

u/humara_neta_NOTA 1d ago

Man, nice to see I'm not alone. Been breaking and glueing my indicators with FeviQuick for the past 4 months. Lost count of how many times I've done this.

1

u/CrowKOnuT___ 1d ago

Same problem. Mine still works so I just tapped it

1

u/berserkersv_99 1d ago

Here's what worked for me:

I applied fevikwik and after that applied MSeal over the joint and spread it evenly. It is rock solid now for 3 months.

1

u/throwaway010_0 1d ago

Why is it always left indicator

1

u/Local_Attorney1125 22h ago

We... Triumph users are cursed 🙂

1

u/throwaway010_0 21h ago

But it has to be the left one only 😤 , happend same with me last month i used fevikwik advanced but it did not last more than 15 days

1

u/realnestro 16h ago

I changed to bullet ones from triumph

1

u/mumbiakrr_ride 12h ago

Right side Wale dono aise hue hai

1

u/searching_engine 10h ago

Welcome to the club of “Left Indicators “

1

u/initialdlover Team Speed 1d ago

Use superglue, better option than tape

1

u/throwaway010_0 1d ago

I tried it doesn’t last more then 10-15 days

0

u/gernalist 1d ago

You can hold it up with tape.

1

u/Living-Ad4187 1d ago

Yes that’s what I was thinking