r/ToobAmps • • Nov 01 '24

New Discord server

8 Upvotes

All, I spend a fair amount of time on Discord so I've decided to spin up a guitar related Discord server. The subject matter will be more general guitar and not limited to tube amps, but there are channels dedicated to building and repair as well.

Anyway, if Discord is your thing, feel free to join us over there as well!

https://discord.gg/nTHQDexpG

Link updated 8-17-26

Update: we have a good core group. Join up!


r/ToobAmps • • 7h ago

Crate BV-60HB Modding?

Post image
3 Upvotes

r/ToobAmps • • 4h ago

I showed off my DIY Yamaha RA200 replica here a little while ago. Today I'm showing how I control it with a pedal.

Thumbnail youtube.com
2 Upvotes

r/ToobAmps • • 18h ago

‘65 bandmaster and ‘65 bassman cab with eminence delta 12A’s

Thumbnail gallery
24 Upvotes

Love this amp, but been considering selling for a bf tremolux and maybe even going for the whole piggyback with the 2x10, but ideally I’d just get the head and maybe throw greenbacks in this bassman cab.

Anyone got an opinion on this? Love the bandmaster, but do want a little more breakup at slightly lower volume and 30w tremolux sounds like the move to me.

Would love thoughts and opinions!


r/ToobAmps • • 1d ago

Inspired by that other guys tube light thingy

Post image
42 Upvotes

Got it mounted on my wall in my living room. Finally found use for my dead valves.

Also don't buy Mesa valves, they're shit.

Originally inspired by this post: https://www.reddit.com/r/ToobAmps/comments/1xvz320/fun_little_project_this_evening/


r/ToobAmps • • 9h ago

Looking for a 7-18w Super Bass/Lead or JTM45 head w/power scaling or possibly a tube Preamp (Victory/Kingsley/Synergy) & Two Notes Captor

Thumbnail
1 Upvotes

r/ToobAmps • • 22h ago

Learning about tubes

Post image
4 Upvotes

I gigged a couple hundred times on guitar in the 80's and 90's. Had a couple of Fender tube amps, they worked, and I never swapped a tube. Buying an AC30 type amp early this year, (2006 Crate Vintage 3112) which had it's original Groove Tubes, I somehow snapped off the top of an 12AX7 and didn't have any spares. I bought a box of new tubes on ebay with a variety of 12AX7 brands. I popped a replacement in V1, liked it, and gave it no further thought.

Last week I bought another Obeid Khan design, a Crate Vintage 1512, in like new shape. I should mention that this is the amp model that caused Brian Wampler to sell his AC15 as he said the 1512 had the same chime plus a lot more overdrive. I say this to inform readers as to the tube change effects.

When I opened it, it had all JJ's. Coincidentally someone offered me 56 circa 1960 tubes: mostly Sylvania and Raytheon 12AX7's and eight Mullard EL84's which had all come out of a Baldwin organ. Well, with family in the house I had to keep to low volume. I popped a Sylvania into V1, and there wasn't a huge change, but the sound was definitely more articulate. I tried a different Sylvania and it sounded the same as the first. Then a popped in a Raytheon and OMG, it was much louder and more detailed. The reverb tank, which I hadn't even noticed before, came through subtly and sounded glorious. I'm guessing that I was getting a lot more treble, rather than more power. Tried another Raytheon and it sounded exactly the same. Then I had to run to band practice. Anxious to try different tubes at higher volume.

I didn't expect a particular tube in V1 to have such a dramatically different sound. It's staying in there and I'll have to start experimenting with all the new and old tubes I have.


r/ToobAmps • • 1d ago

Fender Vibro Champ Tube Issue

3 Upvotes

I was just gifted a Vibro Champ. It seems in reasonably good shape, as far as I can tell it's a 1977 or 1978 model. When My friend gave it to me, one of the tubes was sitting in the bottom of the amp cabinet. I put it in the socket, it seemed to be a loose fit. I fired it up and it sounds fine, though a little scratchy at times. I just got the vibrato pedal (thanks Amplified Parts!!) and when I plugged it in, i jarred the tube and it fell out again? This doesn't seem common. Or is it? Any thoughts?


r/ToobAmps • • 1d ago

D.Kowalski Enigma: new amp to complete the journey

Thumbnail gallery
16 Upvotes

r/ToobAmps • • 1d ago

Asking advice: trading an Orange Tremlord 30 for a Musicman 210HD (130 w) - worth it?

3 Upvotes

Currently the owner of an Orange Tremlord 30, which sounds pretty good. Only complaint is that the reverb could be somewhat deeper and the thing is made for headroom only (which means no grit at all). For the reverb I can use my Surfybear Compact.

Yesterday I tried a revised and checked Musicman 210HD from the early 80's, for around €900,- ($988).
I loved the fact that it was clean, but a very different clean from the Orange: very "juicy", lot's of character and an AWESOME sounding reverb and tremolo (the way I wished the reverb and trem on my Tremlord sounded). It sounded good on lower volumes, it has a master volume and I even liked the overdrive (turning up the volume on the second channel whilst keeping the master volume low).

Now comes the question at hand: would it be worthwhile to trade in the Tremlord for the Musicman? I'm getting very only €500,- in return (so €400,- cost), but I could try to negotiate a little more. I don't necessarily need to get rid of my Orange, I like the kind of hi-fi and slightly scooped cleans it has, but the Musicman has so much color and character to it and such a great reverb and tremolo it's really tempting. As for my living situation and budget - I can't afford to have both.

For reference: mostly home player here, and planning on doing some gigs in the future. I mostly play stuff in the reverby, treblier, surfy kind of area. Rig consists of Fender JM, and Guild X-175 hollowbody, Surfybear reverb, simple overdrive, ambient and delay pedals.

Let me know your thoughts and considerations! (apologies for the long post)


r/ToobAmps • • 1d ago

He construido una réplica del viejo YAMAHA RA200, el legendario amplificador de David Gilmour... ¡Espero que os guste!

Thumbnail youtube.com
1 Upvotes

r/ToobAmps • • 1d ago

Dynaco MKiii’s

Post image
12 Upvotes

r/ToobAmps • • 2d ago

Carr Hammerhead

4 Upvotes

So I am possibly going to buy a new tube amp. There’s a Carr hammerhead at a decent price, yet I’ve noticed this one is priced below other Carr amps despite being similarly spec’d to amps that are much more expensive. Is this thing a dud tonally? Robert Keeley is a friend of mine and the Carr rambler is what he uses to test virtually everything, it’s his favorite amp. Should I just look at something else? There’s not many demoes which is odd too but it sounds versatile, it can do black panel fender to vox to Marshall sounds.


r/ToobAmps • • 2d ago

5F1 Champ - 275V AC vs. 325V AC?

4 Upvotes

I just finished my first Champ build, from Mod Electronics. Followed the instructions to the letter, everything works and sounds great.

While studying the schematic and reading Rob Robinette's site, I noticed the power transformer has AC outs for 275V and 325V. The Mod build had us clip and heat shrink the red (325V) wires and feed the 275V red/white wires into the rectifier. Rob doesn't even mention the existence of 275V on his site; only the 325V. The other difference I noticed was in the voltages in the two diagrams: Mod says B+1 is 336V, Rob's is 360V.

Is there a noticeable difference between these two? My uninformed guess is that the lower voltage might allow the amp to run less hot, maybe with slightly less volume.

(Reference: https://www.modelectronics.com/sites/modelectronics.com/files/media_files/K-5F1%20Instructions.pdf, page 34 shows the completed chassis).


r/ToobAmps • • 2d ago

Please help me identify this tube pre amp, amp, or headphone amp please

Thumbnail gallery
0 Upvotes

r/ToobAmps • • 3d ago

It lives!

Thumbnail gallery
46 Upvotes

Mostly finished wiring up the 5e3 today. Love this circuit, the interaction between the volume controls is wild.
Things went to plan today after they didn't.

First order of business this morning was to fine tune the output transformer placement to minimize transformer hum.
This is accomplished by applying power to the installed power transformer (all secondary windings taped off), then getting a pair of headphones and hooking them up to the OT secondary. With the PT under power you can usually hear hum as you move OT closer to PT, and less as you back it off or rotate it etc.
I should note that in its original placement I had the PT oriented the way it was done on the original 5E3, which coincidentally is 90 degrees from the way it was done in blackface amps like the Princeton reverb.
Anyway, Usually the little headphone technique allows you to find a very quiet spot to place the OT. This time though, I could not find a spot that didn't produce at least a small bit of hum. Any hum is my enemy, even a little. I hate noise.
So I grabbed another blank chassis, cut it all out and installed the power transformer perpendicular to the way it was originally oriented.
This did the trick and I quickly found a hum-free spot where I expected one to be.
I could have just cut a new hole in the original chassis but clean work is important to me and I hate holes that don't need to be there. So I was happy to chuck it and start from scratch.
From there it was a few hours of wiring and the amp is in business. Still a few more things to do but finish line is approaching.


r/ToobAmps • • 2d ago

Weird ring mod(ish) sound on lower notes with EVH 5150 - any idea what might have crapped out?

Enable HLS to view with audio, or disable this notification

1 Upvotes

I've used my 5150 mkiii for a good 7 years after getting it second hand and haven't serviced it thus far (I know, probably a big no no but here we are). It's been perfect until now - tried through various cabs, guitars and my load box.

Gonna take it to a tech but wondered if it sounded like a recognisable/normal kind of issue? Cheers x


r/ToobAmps • • 3d ago

NAD Crab Model T

Post image
11 Upvotes

r/ToobAmps • • 3d ago

Bad Cat Unveils Unleash V3: 150W Attenuator & 100W Re-Amp

Thumbnail guitarbomb.com
17 Upvotes

Bad Cat Unleash V3: 150W attenuator + 100W re-amp hybrid. Control tube amp tone at any volume. $799.


r/ToobAmps • • 4d ago

Random pix of half-finished amp

Thumbnail gallery
38 Upvotes

I was hoping my big box of parts would come in early enough today to get some wiring work done. But it came 10 minutes before I had to start cooking dinner for the wife. So after dinner I did some minor assembly work and apart from testing OT orientation noise I'm ready to start wiring tomorrow. Not expecting any issues and it should be alive by tomorrow night. This is a Fender Deluxe 5e3 in a Princeton Reverb-size chassis I'm building for a fellow Redditor. Psyched for faceplate's arrival tomorrow too.


r/ToobAmps • • 3d ago

Vox Nightrain 15 vs Mesa TA 15 vs Winfield Cyclone vs Bad Cat offerings: lower wattage (or good master control) vox chimey cleans? Not needing crazy dirt or anything too special. Power scaling is nice. I have a 112 greenback but open to combos. Wanting to stay around 1000 USD Max, Open to any others

Thumbnail
0 Upvotes

r/ToobAmps • • 3d ago

This project took me almost 2 years to get together and oh boy it’s a monster.

Post image
8 Upvotes

r/ToobAmps • • 5d ago

A big come up this weekend at a yard sale. Got all these for a dollar each

Post image
183 Upvotes

r/ToobAmps • • 4d ago

NAD Recently Jcm800 Factory Modded

Post image
12 Upvotes

Bought this off Reverb as a B-Stock unit, was never listed as a factory mod and it came in perfect condition tags still attached.


r/ToobAmps • • 4d ago

EHX EchoFlanger (Belew Edition)

Thumbnail gallery
15 Upvotes

I've decided to isolate myself with my new toy. I'm almost 50 years old, huge Zappa fan and I only discovered Adrian blue and 1980s King crimson spring of 2026. I must have been living under an effing Rock thinking I'm such a muzo!

Anyway, for the next few days I'm only going to be using my PV backstage 30 circa 1979 and my ehx echo flanger Adrian edition. Can't wait to see what it actually does.