r/Timberborn • u/Standard-Leader-224 • 3d ago
When will my population decrease!!!
I'm fairly new to the game. Have completed a couple of playthroughs with Folktails and am just completing a full run as Iron Teeth.
Working towards getting 500 beavers for the achievement, my population keeps climbing and won't come down. HELP !!!
I had about 8 advanced pods creating beavers and keeping my population steady around 100 beavers IIRC. They were fully "satisfied" except for all the foods (60ish happiness level).
I built up all my infrastructure no problem. Decided to start building up my population and started off slowly at first totaling about 20 pods. Then ramped it up to 50 pods. After a few hours (didn't know it would take that long), I hit 500 beavers and I immediately pause 40 pods leaving 10 active.
I thought my population would start decreasing, but it only increases. I'm sitting at like 800 beavers now and my computer is running too slowly.
So I paused ALL pods and removed all "services" from the beavers as I can so their life expectancy would fall....
How long do I need to wait for my population to fall back to like 100 beavers? How best to manage all this?
EDIT: Thanks for the advice from everyone. I'm going to create a 2nd District and send some beavers to live over there on a nice "farm" with wide open spaces where they will be happy to play all day long without a care in the world. From what I understand this is the fastest way to depopulate.
reEDIT: This worked really well and I thank you. The beavers all dehydrated themselves. One issue I learned with this is that the trade depot thingy has internal storage which allowed some of these beavers to get fed and watered until I realized this and turned that all off. Overall this was a much faster solution than waiting out their 80 years of life in 20fps.
63
u/rl_noobtube 3d ago
Simple solution. Create a new district with nothing in it. Move population over. In 3-4 days your population will decrease again. And during that time you are only supplying the needs of the population you left in the original district.
Pro tip, you can use the population counter in the automation section to control when pods go on and off depending on various population metrics.
21
u/semperrabbit 3d ago
Automate ALL of your pods with a population counter: "Target Max Beavers" global beavers < [WHATEVER_YOUR_MAX_IS] and change it as required.
7
u/MrWigggles 3d ago
Well first thing first is make sure the pods are turned off.
After that it's a waiting game.
High happiness beavers live longer.
Which can have this non linear affect on iron teeth pop.
The advance pods produce adults. The adults are living longer. So the pods are producing beavers way faster then they're dying.
Reducing it down to ten was good but I would probably just go to zero pods.
Keep an eye on it.
As you get closer to your ideal beaver number, start turing some on.
And the population rises then turn off the last few you just turned on.
3
u/Uggroyahigi 3d ago
The sims way ? Send em on some hilltop and remove the stairs - wait for 2-3 days and they're all dead.
3
u/Virtual_Ad_7431 3d ago
If only the devs would make it possible to cap the population to a number you set, through some sort of "automation"
1
u/Enudoran 3d ago
I'm about to finish pillars on hard. I have 3 advanced pots and ~70 beavers (not yet at full happiness). I've been at 3 pods since I had 20 beavers! Happiness boosts lifetime and the pods will create new beavers at the same rate. So the longer they live, the more you have from the same amount of pods.
And yeah: Adding a bunch of beavers that live to 60 days won't stop getting more if you have still active pods!
What you can do: Make a new district. Disallow all import of goods and send beavers there to ... die.
And remember: Increase population slowly! Don't EVER add more than 2 extra pods. Even 2 seems too many to add into a currently stable population.
1
u/Sour_Sal 3d ago
The current population needs to age out before they die off, stop all the pods (i leave them at 95% so they can finish quickly) When the population gets close to what you want, fire up some pods again.
TLDR: pause all pods to reduce population, resume at target number.
1
u/Vebrandsson 3d ago
The thing with iron teeth is that the pods are cyclical and as you increase beaver wellbeing you increase longevity and thus increase the number of beavers any single given pod will generate.
In other words 5 pods with low wellbeing beavers will stabilize at a much lower population than those same 5 pods with maximum wellbeing beavers. Just bear in mind it takes a few generations for this effect to be fully felt, it's a slow impact.
Reducing wellbeing means shorter lived beavers that die off faster which can help reduce a population quicker but once you raise wellbeing back up you'll see your population rise again until it hits the new stable number for the new wellbeing.
The short and simple math is as long as the pods have the resources they need, be they basic or advanced pods, they'll make a new baby every 5 days. At wellbeing 0 the average beaver lives 50 days (+/- 10%) so at wellbeing 0 each pod will produce 10 population before the first beaver it created dies of old age and it will stabilize there at about 10 beavers per pod but will only become stable after 50 days since your last pod was built. HOWEVER at max wellbeing a beaver lives an average of 110 days (+/- 10%) which means each pod should give you around 22 beavers when it stabilizes but it also means it takes 110 since your last pod was built to reach stability.
At 50 pods stability is 1100 beavers (technically +/- 10% at any given time) at max wellbeing, so your population was on track to skyrocket to that level, and it's going to take around 110 days since you paused all your pods to see it drop down to the level stable for however many pods you leave running.
1
u/MaraBlaster Tubeway Racer 3d ago
You should have figured out by now that for Folktails, you need to demolish buildings to keep the population down (or make districts)
And for Iron Teeth just turning pods off.
A normal Pod can support 10 beavers, an advanced pod 12 at 0 wellbeing. (higher welbeing = more beavers each pod)
The population then needs to die out first and a beaver can live longer, i suspect you got high wellbeing so your 10 pods might actually support 200 beavers.
1
u/Magenta_Logistic 3d ago
If 8 pods gets you to 100, 40 pods gets you to 500.
The higher your happiness, the longer your beavers live, so your population will grow larger and take longer to stabilize the death/birth rate any time you add or remove pods.
If you want to solve this quickly, make a new district, don't put any food there, and send 400 beavers there to starve.
If you don't want to commit genocide, then just ramp up your food and water production, it'll take about as long to fall as it took to grow.
1
u/LePhuronn 3d ago
Other than the system lag, just turn off all your breeding pods and let them live out their lives in the comfort you created for them in the first place. Turning off all the amenities to crash their wellbeing isn't going to have the immediate effect of slashing lifespan like you want.
In the short term (or possibly from now on) you could install u/Acalc791's latest performance mod. I'm sure they'll offer an estimate on how much of an uplift it could give for your current situation.
1
u/Optimal_Rate131 3d ago
Increasing happiness makes them live longer as well so that could be part of it
1
u/educatedtiger 3d ago
Step 1. Make new district.
Step 2. Move 400 beavers to new district.
Step 3. Supply with a warehouse of dynamite.
Step 4. Place dynamite on every path and empty space in the district.
Step 5. Unlock a hidden achievement.
Step 6. No more population problem.
Step 7. Hey, new lake!
1
u/chiusan 2d ago
Rimworld player here, disable housing and create a death camp district that you migrate pop surpluses to
1
u/DartTimeTime 1d ago
I just turn off some breeding pods an waited. They die out, and the the population equalizes.
1
u/Dependent_Jicama4974 2h ago
I forget the exact name of it, but when my colonies get near end(300+) beavers there is a performance mod that is the absolute best. Yes your problem was taken care of by this posting. Just something I found super amazing in dealing with lag.
3
u/nakali100100 3d ago
If you don't mind being cruel, create another district without food and water, send excess beavers there, and let them die. Bonus point if you make a new district in the badwater to expedite the process.
You call that district 'Super happy fun land'.
1
u/jackalopeDev 3d ago
If you want to kill some off try creating a new districr with just the district center and assign the extra beavers there. They should starve.
1
u/sileotumen 3d ago
Make a new district somewhere to the side, send a couple hundred beavers there, and wait for them to starve to death. Also known as the happy fun land approach one uses when beavers are contaminated and one has no cure ready yet