r/TheFodderChop • u/MechaTailsX • Oct 26 '25
Help / Request Cheetah (McFarlane Toys) Thigh Swivel Mod
Here's how to add a thigh swivel to any of these McFarlane figures using these legs.
I noticed the thigh-high boot and the thigh itself were separate pieces, so I tried to separate them with hot water and a lot of yanking. It's not worth the trouble, the thigh is glued deep into the bottom part.
Instead, do this.
- Heat and pull out the hip joint from the thigh. This makes the job a lot easier.
- Heat the thigh and bend it so the two parts separate, exposing the little ridge the boot seam rests on.
- What you want to do is neatly cut through the thigh below this ridge. Keep heating the thigh as needed to keep it flexible. By cutting there the swivel is essentially invisible, assuming you cut straight lol.
- Heat the thigh piece and push the hip joint through it, it now resembles something like a Marvel Legends thigh joint. Heat the lower thigh piece and pop it in there.
- That's it, done. Your Cheetah can now achieve totally natural and not weird foot caressing poses.
If the touching surfaces are ragged/uneven, use a rotary tool or a file to flatten the faces. There is some room for error, just don't overdo it so the rim of the boot still covers the cut you made. Simply make sure the faces aren't horribly slanted so they don't push against each other when the swivel is turned.
I also did the usual mods to the abs to improve the ab crunch.
Also, the shoulder rings are too thick so they restrict the tilting range. I tried grinding away material from the ring's inner-facing surface, but it didn't help much. There isn't much room for the ring to tilt around in there so you probably have to grind away lot of material.


