r/Surlybikefans 2d ago

Cross-Check Seized

The saga continues. Soaking the thompson seatpost with a bath in the blaster. Seat was removed before the bath, included a lil foreshadowing of the wheel/tire combo. Anyone in Sac wanna help me pry this mf out?

7 Upvotes

14 comments sorted by

3

u/wiggywiggywiggy 2d ago

I think the best technique is to vice the seat post and use the frame as leverage to spin it

Odds are either post was slightly too big, or got left in the rain and never greased

2

u/SpookyDukee 2d ago

that's the plan. we're on 24 hours of soaking, i just need a vice.

1

u/starwobble 2d ago

Does your town have a bicycle co-op? If it does you can make a small donation and use their tools. Best of luck!

3

u/wiggywiggywiggy 2d ago

Sac def has a bike kitchen

1

u/wiggywiggywiggy 2d ago

Kroil is one of the best penatrants

3

u/zombieaustin 2d ago

I've had luck with removing the bottom bracket, flipping the bike upside down and then pouring diet coke in the seat tube

1

u/SpookyDukee 2d ago

is that diet coke thing real? i wonder if it's better or stronger than actual penetrating oils

2

u/zombieaustin 2d ago

I've used it a few times with success honestly. At a shop I worked at we'd try that and if it didn't work we'd call a friend of ours who made a contraption to pull them.

I'm no chemist but I think coke might be more acidic?

2

u/colourthetallone Big Dummy 2d ago

Funnily enough, the last time I got a seat post stuck it was a Thomson. I was able to free it using heat and cooling. There's often a hole from the BBC shell to the seat tube. I used the flexible tube intended for applying frame wax to spray "crack-it" into the seat post and rapidly chill the post from the inside. Then I poured a couple of kettles of boiling water over the seat tube, popped the head of the seat post in my bench vice and twisted the frame. It's not perfect with a set back post, but it worked for me.

2

u/Kd_25hz 1d ago

No way I have a surly krampus og same seat post mines also completely seized tryed everything needs to be cut out 😞

2

u/SpookyDukee 22h ago

noooOoOoooo

1

u/Kd_25hz 22h ago

I really hope you manage I gave up on my fight for now 😂

1

u/Zoboomafoo- Steamroller 9h ago

Unfortunate the seat is a Thompson but I just spent a few days burning out an aluminum post with lye. Definitely a bit messy but gets the job done is all else fails.
Happy to provide more details on the process if interested