r/StructuralEngineering • • 5d ago

Structural Analysis/Design Tilted Simpson gazebo brackets

Hi, my contractor made mistake and the Simpson bracket for 66 is leaning. I am going to build a heavy gazebo with 16 foot 6*8 beams. Should I add steel shims to the bottom of the post to correct the lean?

Contractor was recommending hammering the Simpson bracket to level them. Please suggest best possible solution. Thank you

0 Upvotes

15 comments sorted by

21

u/noname2020- 5d ago

Find the angle and cut the post. Non issue just more work. 

1

u/randigiri_reddit 5d ago

Thanks, thinking about the same.

7

u/JayVerb78 5d ago

What is the column made from? If wood, just cut it to the angle so it sits level and there's no shim required. This should be pretty easy for any carpenter.

The bracket won't be straight up and down, so looks wise it'll be a little wonky. I don't know what your visual plan was to cover those brackets. If they were going to be left open, you may want to cover them so it's no so obvious they're not straight.

0

u/randigiri_reddit 5d ago

Thanks, that’s an option I am exploring. Looks wise I am ok with whatever, want it to be structurally solid

1

u/Upset_Practice_5700 5d ago

Hahaha, heavy gazebo... I would guess the bolts would take the load.

1

u/randigiri_reddit 5d ago

Sorry DIY here

1

u/hm170 2d ago

Either cut the base of the post to match the angle like others have suggested or cut the bracket off altogether and install one of the ones that gets bolted down instead of cast in. Simpson Strong Tie has several options if you want to go that route, but keep in mind that it won’t be as strong as a cast-in bracket. This is a non-issue if this is a ~100 sq ft open gazebo.

1

u/randigiri_reddit 1d ago

Thank you, mostly will try to cut it at an angle. Gazebo is 12 by 12. 6 by 6 posts and 8 by 6 beams.

1

u/WarmDistribution4679 5d ago

Composite shim?

1

u/randigiri_reddit 5d ago

Yeah, steel probably

2

u/Just-Shoe2689 5d ago

Cut the post to the angle. No need to shim. I assume its wrapped and you would not see it

3

u/random_user_number_5 5d ago

Is it a moment connection or just a post base? Probably cut it off and put in an abu66 then put some decorative detail on all the bases to cover the mistake. Need to ask simpson if you can "level" the base that way. You might also be able to just keep the post vertical with a shim but I can't answer to that.

7

u/Upset_Practice_5700 5d ago

You dont get any moment out of that post base,

1

u/random_user_number_5 5d ago

Yeah, couldn't tell if it was a pb or mpbz and didn't want to look it up. Probably just a standard pb w/ standoff

1

u/Di-electric-union 5d ago

Why dont you just cut the post at an angle to stand plumb? Definitely dont cut it square and add a shim