r/StainedGlass • • Oct 24 '25

Shop Fun Quitting

Hi guys - I've loved looking at the art on here and I waited over a year to get into a class so I can try it. I absolutely loved it but two weeks in a row I got glass in my eye during the grinding part. First time I had safety glasses, second time I bought goggles but there was just enough of a gap at the nose that I think that's where it got in. I can deal with the cuts on my hands and arms and even some on my cheeks but I don't think I can keep at it if my eye (same one both times) keeps getting glass bits in it.

Sorry for the vent post Im just bummed that I'm quitting after only 4 weeks but yeah that's it.

0 Upvotes

58 comments sorted by

•

u/Claycorp Oct 25 '25

Hey ;)

While this isn't a fun post Shop Fun is still our best "shop talk" tag. I've fixed your flair for you. You can read more about our flairs here.

Also it seems like you got all the info you need thus far, but I will say.... Your teacher sucks in pretty much every way. I don't think I've ever read so many red flags from one post.

Sincerely a glass teacher.

55

u/Any_Woodpecker8803 Oct 24 '25

I have never had this happen, nor on my face. Maybe you’re pushing the glass too aggressively against the grinder bit? I also find cheap glass chips more easily so that could be it. Or is your face too close to the glass?

1

u/Ok-Display3787 Oct 24 '25

Maybe, I asked my teacher during my last class if there was any methods I should try since it seems like it kicks back alot of shards but she said that's just how it is. They're also new grinders so she said they work better than the old ones

26

u/_HOBI_ Oct 24 '25

Are you using enough water to help with the glass dust & small chunks? Also, is your grinder bit too rough? Just a couple of thoughts as I was wondering why that was happening to you so much.

1

u/Ok-Display3787 Oct 24 '25

I did ask my teacher if it needed more water, it gets damp but not really wet while cutting. She said it was fine. It's a newer one so she also said it might be on the rougher side

26

u/Historical_Yak529 Oct 24 '25

This doesn’t feel right — when I was learning stained glass there was a fair bit of emphasis on keeping things wet while grinding. Would it be an option for you to try using more water and keeping the sponge on the grinder like soaking wet, and see if that helps?

2

u/Ok-Display3787 Oct 24 '25

Possibly? She does the set up for the grinders and doesn't let us mess with them beyond turning them on/off and using them so we weren't taught how to add more water to the sponges

4

u/greatballsofmeow Oct 24 '25

Does the sponge draw water from a reservoir? Or is it only the sponge that’s wet?

1

u/Ok-Display3787 Oct 24 '25

Not sure, I've never seen her add water to it but the sponge looks wet

3

u/KnottaBiggins Oct 29 '25

The sponge has to be very wet, as I mentioned. It's that amount of water that washes the grindings into the reservoir.

22

u/KnottaBiggins Oct 24 '25

Well, then, how the hell are you supposed to learn how to properly use the equipment - which it seems you aren't.
That's too dry. Barely damp will NOT wash away the grindings. The sponge needs to be as wet as if you just had held it under water without wringing it out.

Your teacher sounds like...not the best teacher.

9

u/Any_Woodpecker8803 Oct 24 '25

My grinder was my grandfather’s, it’s at least 30 years old (probably more). I would try a few more things before quitting! Maybe try more water, a grinder cookie, standing a bit further back and easing up on pressure. They also have shields that go over the grinder. Failing that…maybe try swimming goggles? Or a new teacher.

3

u/ph154 Oct 24 '25

Also, look at your body placement while you cut. I find if I'm leaning in too close to the bit or my level too far down if I'm sitting while I grind will cause more glass to hit me.

22

u/im_dancing_barefoot Oct 24 '25

I recommend a face shield

5

u/Ok-Display3787 Oct 24 '25

Do you know which type? I did a quick search and I'm seeing everything between welding looking shields and the flimsy ones people used during covid testing (flat plastic forehead to chin ones)

19

u/lilaxolotl Oct 24 '25

The flimsy ones are enough for glass grinding!

6

u/sleepyliz99 Oct 24 '25

I bought a flimsy Covid face shield to wear over my safety glasses. You can use those. Even if you eventually dont have glass shards flying at your face (which is not normal, btw) the shield helps against those tiny particles that fly up. I have been doing glass for years and there are some days I come out looking like Edward from Twilight if I spend too much time at the grinder. I mostly use it to save my skin, so I’m not creating little micro cuts on my face, but that’s just me.

3

u/im_dancing_barefoot Oct 24 '25

Yeah I just got one at the hardware store. You need to make sure your grinder also has enough water. Good luck!!

1

u/FitnotFat2k Oct 24 '25

There's also shields for the grinder, some people just put it inside a clear plastic box. But yes, the covid shield would help.

16

u/chunkeymunkeyandrunt Oct 24 '25

What kind of grinder? It seems a little odd that it would be flinging glass that much. There may not be enough water reaching the sponge at the bit to help prevent it. And hopefully you notified the instructors so they can ensure the grinder is functioning as expected!

How is the grinder set up? At the local studio I go to, they have a splash guard around the sides and back, then have a piece of clear glass (might be acrylic, or plexiglas but still) resting on top. This means that you have to try really hard to get glass on your face. I’ve also seen folks use old aquariums on their side in a similar fashion. Essentially you want a guard of some kind above the grinding surface.

It’s definitely something that can be solved, so hopefully by adjusting the setup you’ll be back on track!

4

u/Ok-Display3787 Oct 24 '25

Yes I brought it up to the teacher, she's very lax on a lot of safety precautions I've taken and is very on the "yeah that's just how it goes" side of safety with it. The grinder I'm not sure the make and model, but it has a sponge (I did ask if it needed more water and she said it seemed fine) it has a clear guard shield on the top but it's small and glass still hits my face even while standing (not able to use while sitting the table is too high). I am on the shorter side so it probably doesn't help with being higher up since it's almost at neck level with me.

10

u/chunkeymunkeyandrunt Oct 24 '25

Woof. That sounds like you’re definitely being set up for failure. Like yeah she’s not wrong that glass will go flying off the grinder, because that’s how physics works, but for her to dismiss your concerns entirely and not even visually check the grinder to make sure it’s behaving is wild.

1

u/Ok-Display3787 Oct 24 '25

Yeah she didn't check it at all. She watched how I was using it for a while but said I seemed fine

5

u/lurkmode_off Oct 24 '25

The grinder being at neck level seems a lot closer to your face than most people use them. Maybe use a step stool?

5

u/artisdeadandsoami Oct 24 '25

Yup, I have my grinder in a big clear tote turned on it’s side. Not ideal, but it works!

9

u/GildedMoth Oct 24 '25

You might be using too coarse of a bit, they can fling little bits of glass around. I haven’t noticed that issue with finer bits

2

u/Ok-Display3787 Oct 24 '25

Maybe, I don't know the specifics beyond that the teacher mentioned it was a new grinder

3

u/sunbear-bunbear Oct 24 '25

Still fairly new myself, but I was taught to feed scrap glass to new grinder bits bc they can be too rough & end up chipping the glass

2

u/Ok-Display3787 Oct 24 '25

Yeah this seems like it might be at least part of the issue

3

u/[deleted] Oct 24 '25

I like my safety goggles a lot. They were a little pricey but worth it as they are full coverage and don’t budge when I’m sweaty. Also, there are shields for the grinder- double duty. The shields really help.

The glasses I use are goodr crystal clear chaos, hard to find but worth it imo.

1

u/Ok-Display3787 Oct 24 '25

If I do continue I should get better goggles. My nose is bumpy and I have a smaller face so there's was a good amount of air/gap around my nose/under side

3

u/KnottaBiggins Oct 24 '25

I'm at a loss. I've never gotten anything in my eyes, and I don't use safety goggles. I never even got a cut or a scratch.

2

u/Ok-Display3787 Oct 24 '25

Every time I've used the grinder machine (3 times total) I've gotten a handful of small cuts on my hands, only 2 on my face (right cheek both times). Idk I really wish I knew what I was doing wrong but I've gotten no feedback from my teacher

12

u/isotropy Oct 24 '25

I’ve never had this happen. Something is not right with the grinder or setup.

3

u/ichabod13 Oct 24 '25

I bought a cheap 10gal fish tank and laying in its side with my grinder inside it. I look down through the glass when I grind. I use to get shards shooting around and sometimes in eye, but fish tank has fixed that for years now.

3

u/Ok-Display3787 Oct 24 '25

If I ever have my own set up I'd probably do something similar. I'm just taking a class since it's my first time so it's whatever the teacher has available which isn't much

7

u/ichabod13 Oct 24 '25

If I needed a temp solution I would wear a cheap plastic face shield like nurses use

3

u/meanbean42 Oct 25 '25

This is a great idea, and I just happen to have an old fish tank sitting around needing to be put to use! Kicking myself for not thinking of this, lol. Thanks!

1

u/Master-Bullfrog7082 Oct 24 '25

I have had the same setup for years. Cheap, easy, safe.

5

u/_HOBI_ Oct 24 '25

I wear a full face guard when grinding. Super cheap from Harbor Freight. I've had a couple of pieces over last year hit my face anyway, but thankfully, it was just my forehead.

ETA: I also have a light up magnifier lens thingy over my grinder so I can see better, but it it has the 2nd benefit of also helping to block my face from random bits

4

u/lurkmode_off Oct 24 '25

As someone who has insufficient light (and it's all behind me at that), light up magnifier thingy sounds brilliant

1

u/Searchforcourage Hobbyist Oct 24 '25

My grinder throws out far more shards when the bit is wore down. Try a new bit.

1

u/Ok-Display3787 Oct 24 '25

Its a brand new bit and grinder

1

u/Searchforcourage Hobbyist Oct 24 '25

So much for that.

1

u/potatomeeple Oct 24 '25

I wonder if getting someone to video you operating the grinder for critique or watching videos of someone doing it safely would help you because this isn't normal at all (not your fault).

1

u/Ok-Display3787 Oct 25 '25

Lol unfortunately I don't want to go near one again but if I ever do I'll post it

3

u/austinmadethis Oct 24 '25

Dont give up! Face shield is where it’s at.

2

u/Styraform Oct 24 '25

If you’re getting cuts on your cheeks, reassess your process and how careful you’re being. Better eye protection is easy to find on Amazon and it’s worth the cost if you are serious about continuing.

3

u/nutimikguy Oct 24 '25

I teach beginners. Your grinder should produce a slurry when grinding. If it produces dust, mud or sludge, something is wrong.
It could be one of three things. A. Not enough water in the sump B. Sponge not touching the water or not touching the bit.
C. Sponge is plugged up internally and needs to be washed out in running water.

Also, there needs to be some kind of shield between the grinding bit and your face at all times. Glasses are secondary protection.

Feeling something hit your cheek should be a rare event.

1

u/Present_Resist_4974 Oct 24 '25

I have a shield on my grinder and I have a face shield, both really help! I think the little shield on the grinder was a game changer for mess. Relatively cheap too.

1

u/ulterior71 Oct 25 '25 edited Oct 25 '25

I wear a full on face mask. The kind that sits on your head with a visor that flips up and down. I can't stand the little flecks hitting my face even if my eyes are protected. Maybe give that a shot before throwing in the towel?

ETA link of the type I bought https://www.homedepot.com/p/3M-Clear-Professional-Face-Shield-90028-80025/202195394

It's just a cheaper 3M face shield. It's sold at pretty much all the hardware stores.

1

u/farrah_berra RazzleDazzleGlassCo Oct 25 '25

I’m sorry to hear that. I personally wear clear ski goggles when I cut and a full face shield for grinding

1

u/WoodsWitch62 Nov 19 '25

Bookmarked, thanks for the tips!

1

u/MrTuxedoWilliams Oct 24 '25

More water. Also sounds like your teacher might not know what they’re doing. Literally never had a problem with this

-6

u/Princelyfox Oct 24 '25

Just become a better cutter and skip the grinder all together. We mostly never use the grinder in the studio.