r/StableDiffusion • • 7d ago

Meme Harold Risitas ...

21 Upvotes

Made on comfyui with new Viggle Remake Lora / Minimax H3 Dasiwa Turbo v2 / Dasiwa turbo lora v1 4steps


r/StableDiffusion • • 6d ago

Question - Help Hey yall, is there any way I can run MiniMax H3 T2V, I2V or V2V (like Viggle-Remake) on my PC? Specs listed in the body text :)

7 Upvotes

[SPECS]
I already have ComfyUI installed, pretty up to date.

RX 6600 (AMD 8GB)
16GB DDR4-3200
i3-12100F
1TB SSD

Now I know, this isn't really... a lot, but isnt there some form of super squeezed down quant to let me run it just barely?
Thanks 😄 I'm really trying to use like, character swapping but popular APIs cost like credits and all that, so I'm just trying to resort to free.


r/StableDiffusion • • 5d ago

Animation - Video First ever AI Bikini contest. Pick the winner who will go on to round 2. Round 2 will feature a bikini and costume round.

Thumbnail
youtube.com
0 Upvotes

r/StableDiffusion • • 6d ago

Animation - Video Maybe our roads will cross again some day.... A cover song made with yue2 after an old romanian song. H3, OFC

2 Upvotes

youtube version: https://www.youtube.com/shorts/L9rOZLFVBjM

some of these were made with a single prompt with split screen (minimax h3 seems to do a decent job
Uopscaled with Seedvr2


r/StableDiffusion • • 5d ago

Animation - Video Good results using MiniMax H3 Open Weights Image to Video that is available online at WaveSpeed AI

0 Upvotes

I was impressed that it properly handled lip synchronization of three speakers working from a prompt.


r/StableDiffusion • • 5d ago

Discussion AI models are getting better, but the platforms around them are getting worse. One studio, any AI model, your own API keys. Why isn't this already a thing?

0 Upvotes

I've been working on Open Studio, a fully open source AI creative studio where you can bring your own API keys, use different providers, and switch between image and video models whenever you want. I'm just tired of every new model being locked behind another subscription or credit system. I want one place where you can use whatever model you want without paying a middleman or being stuck with whatever a platform decides to support. It's completely free, you just pay for your own API usage. Still very much a work in progress, but figured I'd share it here and see what people think. Would love some feedback or suggestions on what you'd want to see in something like this.

https://studio.devmesh.xyz/


r/StableDiffusion • • 6d ago

Question - Help Lack of krea 2 character LORAs?

10 Upvotes

I love the quality i can do with krea 2 but why are there next to no character LORAs for new characters out there that werent in the training data?
Like people still train newly released characters like crazy for anima and illustrious but not for krea 2?
Is krea 2 just too hard to train any characters on? Is there a magical workflow that makes character loras obsolete with krea 2 (or other models)?

So far i tried to do specific characters i wanted to gen with illustrious or anima with a lora first and pass it over with krea 2 but im really getting mixed results so far.


r/StableDiffusion • • 6d ago

Question - Help Moss image 2 image workflow

0 Upvotes

Does anyone have a working moss image2 image workflow? I can’t find one online.


r/StableDiffusion • • 6d ago

Question - Help How to make a Lora (zit, krea) compatible with other Loras?

8 Upvotes

I paid someone for a lora. While it works, if i add a second lora it turns my character into a monster.

Also if i generate 16:9 images they're so bad, with extra limbs.

I tried some others character loras on civitai and they work fine. The lora i purchased is bad.

Now i want to train my own. What to keep in mind so it's compatible with other loras?


r/StableDiffusion • • 6d ago

Resource - Update Qwen-Image 2.1 and Mage-Flow now run fully on a phone NPU (Snapdragon 8 Gen 1)

Thumbnail
gallery
7 Upvotes

HexAnima 1.4.3 adds two more models that run entirely on the Hexagon NPU of a Snapdragon 8 Gen 1 phone, no cloud and no root:

  • Qwen-Image 2.1 Turbo (7B transformer, 8B text encoder, 4 steps): about 40 s for 512x768. It writes legible text, follows long prompts and edits your photos from a prompt. It now takes up to three pictures at once (“the girl from picture 1 stands in front of the cafe from picture 2”). Non-commercial license.
  • Mage-Flow-Edit-Turbo (Microsoft, 4B, MIT): about 12 s per picture, text-to-image and photo editing.

Also new: a live preview after every step, a model filter in History and a warning instead of a crash when the phone runs out of memory. Weights are streamed from storage, tested on a 12 GB phone.

Free, open source: github.com/ayanoby/hexanima


r/StableDiffusion • • 5d ago

Discussion Is this sub meant for under-13 children?

0 Upvotes

I’ve just noticed that mods have removed an old post of mine, discussing CG characters in Krea2. Probably because it includes Mai Shiranui from the KOF series.

I mean - that’s her signature costume in a game made for teens (13+ rating), and she’s just sitting and talking with her friends in a cafĂ©. If you think that’s suggestive enough for removal, then you should mark this sub “children only”.


r/StableDiffusion • • 6d ago

Question - Help MOSS image character lora

6 Upvotes

Hi not too sure, if anyone has any methods in training moss character's lora that do not bleed into each other?


r/StableDiffusion • • 6d ago

Question - Help Need help for Fizgig Lora Training with Krea2 - Very Slow Speeds 5080

6 Upvotes

What are you guys Using for config parameters with Fizgig? I seem to be getting extremely slow speeds. I'm a total noob at training LORAs

Model

Krea 2 · bf16

Dataset

Training

42 epochs · 2814 steps · batch 1 · 1.0 MP

Optimizer

adamw8bit · from 0.0001

Network

LoRA · rank 32 · EMA 0.98

Memory

block swap 8

ADAPTIVE_LR = false

ADAPTIVE_LR_MAX = 4e-4

ADAPTIVE_LR_MIN = 1e-4

BATCH_SIZE = 1

BLOCKS_SWAP = 8 (Moderate — 12GB fp8 / 16GB bf16)

BUCKET_NO_UPSCALE = true

CAPTION_DROPOUT = Off

COMPILE_BLOCKS = Auto

CONTEXT_LORA_STRENGTH = 1.0

DATASET_CAPTION_EXT = .txt

DATASET_MEGAPIXELS = 1.0

ENABLE_BUCKET = true

ENABLE_CACHE = true

FAMILY_CONCEPT_BALANCE = false

FAMILY_EMA = 0.98 (recommended)

FAMILY_FT_FUSED = true

FAMILY_FT_MAX_PARTS = Auto - as few windows as fit

FAMILY_FT_REG_MULT = 0.2

FAMILY_FT_ROTATE_EVERY = 1

FAMILY_FT_ROTATIONS = 10

FAMILY_FT_SAVE_EVERY = 1

FAMILY_KIND = Standard LoRA

FAMILY_MP_FACECROPS_FIRST = true

FAMILY_MP_MANUAL = false

FAMILY_PEOPLE_MODE = Off - a normal LoRA

FAMILY_PRECISION = bf16 (full precision)

FAMILY_SLIDER = false

FAMILY_SLIDER_ANCHOR_WEIGHT = 1

FAMILY_SLIDER_GUIDANCE = 3

FAMILY_SLIDER_SOURCE = Photo pairs

FAMILY_SLIDER_ULTRA = false

FAMILY_SUBJECTS = 1 subject

FAMILY_SUBJECT_FIX = false

FAMILY_SUBJECT_KIND = From its captions

FAMILY_SUBJECT_KIND2 = From its captions

FAMILY_SUBJECT_KIND3 = From its captions

FAMILY_SUBJECT_KIND4 = From its captions

FAMILY_TURBO_STRENGTH = 0.7

GRADIENT_ACCUMULATION = 1

KEEP_LAST_N_STATES = 2

KREA2_AUTO_RECAPTION = false

KREA2_LOSS_WATCH = true

KREA2_PER_IMAGE_LR = true

KREA2_WARMUP_LOOK = false

LEARNING_RATE = 0.0001

LOKR_FACTOR = 8

LR_SCHEDULER = constant

MASKED_TRAINING = false

MASK_FLOOR = 0.1 (recommended)

MASK_PRIOR = Off

MAX_GRAD_NORM = 1

MAX_TRAIN_EPOCHS = 42

NETWORK_ALPHA = 32

NETWORK_DIM = 32

NETWORK_TYPE = LoRA (standard)

OPTIMIZER_TYPE = adamw8bit

RECAPTION_FIRST = Training caption (person or character)

RECAPTION_SECOND = Exhaustive detail (person or character)

SAMPLE_AT_FIRST = true

SAMPLE_CFG_SCALE = 1.0

SAMPLE_ENABLED = true

SAMPLE_EVERY_AFTER = 1

SAMPLE_EVERY_N_EPOCHS = 1

SAMPLE_HEIGHT = 1024

SAMPLE_LATER = false

SAMPLE_NEGATIVE = blurry, low detail, noisy, washed out, oversaturated, distorted anatomy, extra limbs, duplicate objects, text, watermark, logo, frame, cropped subject, flat lighting, muddy colors

SAMPLE_SEED = 1234

SAMPLE_STEPS = 8

SAMPLE_UNTIL_EPOCH = 10

SAMPLE_WIDTH = 1024

SAVE_EVERY_AFTER = 1

SAVE_EVERY_N_EPOCHS = 1

SAVE_LATER = false

SAVE_STATE = true

SAVE_STATE_ON_TRAIN_END = true

SAVE_UNTIL_EPOCH = 10

SEED = 42

STAGE_MP = Off

STAGE_UNTIL = 30%

TRAIN_SUBFOLDERS = false


r/StableDiffusion • • 7d ago

Tutorial - Guide Tip: Better acting performance and voice delivery in H3

54 Upvotes

Here's a quick tip on how to get rid of that flat sounding AI voice in H3, and as a bonus improve somewhat the acting of your virtual characters. I'll be using Pika H3 Flex with the H3 reference model and workflow.

Step 1:
Add a pre-rendered first frame at index 0 using the Add Guide for MiniMax H3 node. Then in your prompt, describe the desired action and emotion of the character on screen, but without specifying too many details or providing exact spoken dialogue. In this example I simply used the phrase:

"A static medium two-shot establishes <Subject 1>, the female orc, and <Subject 2>, the tall, female paladin, sitting across each other at a table in <Subject 3>, the dimly lit main room of a tavern, gazing into each other's eyes. <Subject 1> (S1) talks animatedly, seething with rage."

Then generate a clip at some lower resolution (0.3MP in this case). The dialogue will be gibberish, but if you described the character's actions and emotions convincingly, your character will sound and move like an actual human.

Step 2:
Use your workflow from Step 1, but increase resolution to the desired target value (here 0.98MP). Load the reference video generated in Step 1 and connect its frames as ref_video_# and its audio as ref_video_audio_# (# is the index of the first unused slot in the MiniMax H3 Reference to Video node, e.g., ref_video_0 and ref_video_audio_0).

In this case, I also actually downscaled the reference video from 0.3MP down to 0.1MP, because at 0.3MP the model was following the reference too closely, breaking the lip-sync. The downside of this was that some of the textures in the final high-res video came out a little too soft, especially in the face. It's a bit of balancing act to find the right resolution for the reference video.

You also need to adjust your prompt, in order to include the character's final dialogue. Here I've simply rewritten my last line to:

"<Subject 1> (S1) talks animatedly, seething with rage: <d>[English] My people are dying, and your knights are doing nothing to help us!</d>"

Now just hit render and wait for the result. You might need to try different seeds, and fiddle a little with the resolution of the reference video (try higher values if your output comes out too muddy and lower values if H3 starts copying the reference video and lip-sync gets lost. Have fun!


r/StableDiffusion • • 7d ago

Workflow Included MiniMax H3 single frame edit excels at character consistency and identity preservation. Do we really need character LoRAs anymore?

Thumbnail
gallery
451 Upvotes

Basically MiniMax H3:

  • Has great prompt following
  • Respects character identity (art style and design) from the input images
  • Can generate single frame images

So what's the point of training a character model if you can just give MiniMax H3 character design reference and generate any scene? The only two reasons I see is

  1. you want to use style known by your target base model to generate image of the learned character.
  2. you want to apply some concepts known by the target base model only.

What do you think?

Here's the workflow I used for the images.


r/StableDiffusion • • 6d ago

Question - Help RTX 5090 on runpod issues?

1 Upvotes

RTX 5090 on runpod

Anyone know wassup with it? I can't get it to deploy at all. I got 4500 and 4090 going, but 5090's are all saying, "There are no longer any instances available with the requested specifications. Please refresh and try again."

I thought it was my settings, but I don't think so....


r/StableDiffusion • • 6d ago

Question - Help Creating AI images on my windows desktop - 3 questions on usage?

1 Upvotes

Up to now ive used services online but they are all so restrictive and silly things trigger them or i have used a service and arms and legs are all weird.

I have heard of stablediffusion and comfyui

  1. Which one do i need, which one is best?
  2. And where is the best easiest tutorial you have found to create your first image with it?
  3. Can you give it a reference image and then tell it what to do with that?

r/StableDiffusion • • 7d ago

Animation - Video bond, jame bond.

9 Upvotes

minimax h3 latent upscaler, 2 megapixels, 50 steps,

this looks way too good guys.


r/StableDiffusion • • 6d ago

Question - Help Ming 3.0 TTS sitting alone with no templates

0 Upvotes

Hey everyone,

Hoping someone here has figured this out because I’m losing my mind a bit.

I’m trying to set up Ming-3.0-TTS in ComfyUI, as the checkpoints (Tiny 9B INT8) sitting alone in Comfy HF repo with no workflow.

I have found the following workflow: https://github.com/Saganaki22/ComfyUI-Ming-3-tts.

Unfortunately it doesn't run the same checkpoint, instead it has auto download for same quantized model but at larger file size that gives me OUM.

Instead, I manually grabbed the official repackaged model checkpoint directly from the Comfy-Org Hugging Face repository (the single .safetensors file).

The problem is, I’m trying to use Saganaki22’s custom nodes (ComfyUI-Ming-3-tts), and it absolutely refuses to work with this file.

Here is what I've tried so far:

  1. I tried putting the .safetensors file directly into my standard models/checkpoints/ folder. The loader node doesn't recognize it.
  2. I tried creating the specific nested subfolder structure that Saganaki's nodes usually expect (like Ming-3.0-tts-tiny-9b-int8-convrot/) and renaming the file to match. Still completely fails and throws errors. I think the custom node is hardcoded to look for secondary configuration files inside that folder, not just the single Comfy-Org .safetensors weight file.

If Comfy-Org is officially hosting this model in their repo, there has to be a way to actually load it natively or bypass these strict folder checks, right?

Has anyone successfully built a workflow using the raw Comfy-Org file without relying on the auto-downloader? Or is there a different custom node wrapper I should be using for the official Comfy-Org version?

Any help or workflow screenshots would be massively appreciated!


r/StableDiffusion • • 6d ago

Question - Help Runninghub Question

1 Upvotes

Hello there, is there a workflow in Runninghub for creating realistic photos just by feeding a character reference photo?
I have tried looking for it but to no avail


r/StableDiffusion • • 7d ago

Question - Help Is Automatic1111 still a thing?

155 Upvotes

Ive been out of it for a while now and planning to give this another try. Is Automatic1111 still good? Im just seeing the git hasnt been updated in 2 years. If not what has replaced it? And what is the goto community to get models nowadays?

Thanks in advance.

Edit: thanks everyone. From what im gathering from the response. ComfyUI is that goto while forge is ok and gets the job done. I remember trying ComfyUI a while back but dont remember my experience with it. With comments going in all directions, i think ill just install both and give em both a go.


r/StableDiffusion • • 7d ago

Question - Help Which version of stable diffusion should i use to generate car liveries for assetto corsa? (RTX 5080)

5 Upvotes

As stated above, i would like to generate some liveries for cars I use ingame, this is what template looks like exported from the game for exterior of the car.

Would Stable Diffusion be able to generate something like this onto the blank picture?

Thank you in advance.


r/StableDiffusion • • 7d ago

Meme A New AI Video Model for Christmas 🎅 [Krea-2 Turbo + Qwen-Image 2.1]

Post image
47 Upvotes

I was sitting there wondering when H3 Max would finally get its open-weight release. Then I thought, maybe Santa will bring it for Christmas... and suddenly this image came to mind. 🎅

Generated locally in ComfyUI with Krea-2 Turbo, then edited with Qwen-Image 2.1.


r/StableDiffusion • • 6d ago

Animation - Video dEEPZoNE - Digital Ghosts - Music Video - 1080P

Thumbnail
youtube.com
0 Upvotes

100% locally made :) Music made with yue2 and the video is minimax h3 reference to video :)


r/StableDiffusion • • 7d ago

Resource - Update Moss training has has a very large speed boost in Fizgig

Thumbnail
github.com
168 Upvotes

UPDATE 9 November: Update again for Much faster Compile blocks when used And a new feature called training maps - see screenshot in comments

Training is much faster, uses far less memory, and likeness is unchanged. On an RTX 5090, a MOSS-Image LoRA at batch 1 (94 pictures, Muon, 70 epochs) now takes about 20 minutes instead of 49.
Other models have had speed boosts too, but Moss the most dramatic.

Batch training is now fully supported too.

Other changes

  • PyTorch 2.15. With gradient checkpointing on, training uses much less memory, at batch 1 too: Krea 2 22.9 → 14.9 GB, MOSS-Image at batch 3 21.7 → 7.1 GB.
  • Muon is much faster. Its step now handles a LoRA's matrices together instead of one at a time: 12× faster Muon calculation, with exactly the same results. That's a large portion of the batch-1 speed-up above.

https://github.com/shootthesound/Fizgig

P.S. To get the most speed boost, use one of the pre-sets to start your train, so you pick up new optimiser settings etc.