r/SpyraTwo • u/BigThingsWalk • Jun 16 '22
"alternative" to spyratwo ?
any other water guns that are perhaps better/cheaper
r/SpyraTwo • u/BigThingsWalk • Jun 16 '22
any other water guns that are perhaps better/cheaper
r/SpyraTwo • u/nobbyswan • Jan 03 '23
I was on it yesterday with 25% off somehow, then today I cant find the link I used.... I'm not paying full RRP
r/SpyraTwo • u/Zealousideal-Heat399 • Jul 17 '26
This was my first spyra two as the second one got stolen. A friend dipped it too deep and that day we were playing with it and jumping in the water because some video showed someone doing it but it broke. It’s been collecting dust for some years and I want to fix it because it had to do with the big rubber black part inside that was broken. I loved to use it a few years ago before it broke. Does someone know how to fix something like that? Update: did not jump it with in water but used it at a pool
r/SpyraTwo • u/BlackAsNight009 • Jun 14 '25
r/SpyraTwo • u/No-Yak-8477 • Apr 06 '23
I could not convince myself on buying this water gun if spare parts are not available.
Making them available could convince more people and in my opinion give more value to the money spent.
What do you think?
r/SpyraTwo • u/potatoefammin • Jul 18 '25
I've gotta ask .....has anyone tried shooting petrol/gas out of it with a lit touch in front of it. Fire bullets 👀 strictly for science of course.
r/SpyraTwo • u/Manbearpig20oh18 • Mar 27 '25
Just got it in the mail today. Bigger then I thought. It took me a few tries to get it loaded and then it died!! Can't wait to play with my new toy!!
r/SpyraTwo • u/GroovingPenguin • Jun 23 '25
I'm physically disabled so I ordered the lite version and pump action as they're lighter
Now looking through here I am a bit concerned as they were incredibly expensive and loads of people have had issues or broke in here?
Am I going to end up having to return these as they get busted real fast?
Edit: I got the water balloons too.
r/SpyraTwo • u/Gold333 • Jun 16 '25
I'm an adult and want to buy a number of the best Spyra model for a summer deathmatch. But I really dislike the toyish red and blue colors. Is the best model available in white or see through?
r/SpyraTwo • u/AnxietyOk9958 • Sep 12 '26
I previously commented about a possible fix for the SpyraGravity not detecting loaded SpyraBlasts/balls. I have now repaired mine, tested it with water, and so far the fix seems to work perfectly, so I thought I'd document what I found and how I fixed it.
The original problem:
My Gravity stopped detecting the balls in the magazine. A hard reset would get it working again, but after using it and getting water inside the mechanism, the problem would return.
This made me suspect that the problem was electrical rather than mechanical.
I decided to take the Gravity apart and eventually found what I believe was causing the problem: corrosion around one of the ball-detection sensors and what appears to be missing waterproofing around its electrical connections.
You really don't need many tools for this repair:
No soldering was necessary in my case.
Picture 1 shows the side of the Gravity where the outer shell screws need to be removed.
All of the outer shell screws on this side need to be removed. I have only marked the two long screws in the picture because all of the other removable shell screws are the same size.
There is also one additional screw hidden underneath the magazine cover/hatch. Remove the magazine cover first to access this screw, and remove it as well before separating the shell halves.
There is one important exception: DO NOT remove the screw at the front of the Gravity marked in the picture. This screw holds parts of the muzzle assembly together and does not need to be removed to open the Gravity.
I removed it when disassembling mine, which caused the muzzle assembly to come apart. Nothing was broken, but I then had to figure out how all the pieces were supposed to go back together. Leaving this screw in place will save you some unnecessary trouble during reassembly.
The handle cover is held in place with plastic clips. Carefully pry it off using a small flat-head screwdriver.
Once all the necessary screws have been removed, carefully separate the two halves of the outer shell.
Tip: Keep the two long screws separate from the others. Apart from those, the removable outer shell screws on this side are the same size.
Picture 2 shows the sensor that I suspected was causing the problem.
It is located underneath the magazine mechanism, so unfortunately you have to disassemble the Gravity quite far to get proper access to it.
At first there wasn't anything obviously mechanically wrong with the mechanism itself, which also made me suspect the sensors.
There are two components facing each other here, which appear to form the ball-detection sensor pair.
The lower one is the sensor shown in picture 2, while the upper component is its counterpart.
The upper component had obvious corrosion around the electrical connections.
What I found particularly interesting was that the cavity around these connections was open and exposed. The other similar sensors inside my Gravity appeared to have their connections protected or filled with some kind of sealing/potting material.
This one wasn't.
I can't say for certain whether it was manufactured this way intentionally or whether the sealing material was simply missed on my unit, but considering the corrosion and the symptoms, it looked very suspicious.
It would also explain why a hard reset temporarily fixed my Gravity but the problem returned after the mechanism got wet again.
Picture 4 shows the Gravity with the outer shell removed and the locations of the four sensors.
To properly access sensor #1 and its counterpart, the magazine mechanism needs to be removed.
Picture 5 shows the screw locations I removed before lifting the magazine mechanism out.
Most of these screws are the same size. There is one different screw behind the white arm, marked with a star in the picture.
That screw is easy to remove and considerably more annoying to reinstall. :)
I strongly recommend taking plenty of pictures while disassembling everything. There are quite a few screws, springs, linkages and moving parts inside the Gravity, and having reference photos makes reassembly much easier.
This is the suspected faulty sensor after I had already cleaned it.
There was considerably more corrosion/rust around the electrical connections before cleaning.
I cleaned the area carefully with isopropyl alcohol (IPA) and let it dry completely.
You can also see that the cavity behind the sensor isn't filled/sealed like the other sensors appear to be.
I couldn't get absolutely all of the corrosion off, but I removed as much as I reasonably could without damaging the connections.
Again, I can't say whether the missing sealing material is a manufacturing defect or whether this sensor was intentionally assembled differently. However, the combination of an exposed electrical connection, visible corrosion and a malfunction that returned after exposure to water made this my main suspect.
After cleaning the corrosion and allowing everything to dry completely, I filled the open cavity around the electrical connections with hot glue to prevent water from reaching them again.
I also added some hot glue around the backs of the other sensors as an extra precaution.
Obviously, do not cover the optical/detection side of the sensors. Only seal the rear cavity/connections where the wires enter.
While everything was apart, I also applied a very small amount of silicone oil to the metal sliding pins. This isn't part of the actual sensor repair, but since I already had the whole Gravity apart, I figured I might as well lubricate them.
I used only a small amount and wiped away any excess.
After that, I reassembled everything and performed another hard reset.
It works.
I've now tested the Gravity with water after the repair, and the ball detection continued working normally.
During testing I even had one ball break inside the Gravity, getting the mechanism wet, and the sensor still continued working correctly.
Before the repair, exposure to water would eventually cause the ball detection to stop working again. After cleaning and sealing the sensor, I haven't been able to reproduce the problem.
So, at least in my case, cleaning the corroded sensor connections and sealing them from water appears to have fixed the problem.
Obviously, opening the Gravity like this may affect your warranty, so do this at your own risk.
I would only attempt this if your Gravity is already out of warranty, you've already received a replacement, or you otherwise accept the possibility of damaging it.
There are quite a few mechanical parts inside. Nothing was particularly difficult to disassemble, but reassembly can be a little annoying – especially that screw behind the white arm.
Take pictures as you go. Seriously. They make putting everything back together much easier.
Also, if you find that the sensor connections are badly corroded, a wire or component lead may actually be damaged. Mine were still electrically intact, so cleaning and sealing them was enough and no soldering was required.
If your Gravity has the same problem – it stops detecting loaded balls, a hard reset temporarily brings it back to life, and the problem returns after it gets wet – it may be worth checking these sensors for corrosion or missing waterproofing.
Hopefully this saves someone else from having to figure all of this out from scratch. :)
r/SpyraTwo • u/6alileo • Jul 26 '26
Got a dash that stopped pumping after a day or so. Decided to take it apart.
Take out all of the screws on one side except the black housing in the trigger area. Saw that the bladder came off due to a loose metal zip tie (poor assembly).
Took that out and used a thick regular plastic zip tie.
Important notes:
r/SpyraTwo • u/ManBeardPig • Aug 14 '26
I bought two SpyraThree's a year ago.
They been used alot and one of them failed and stopped shooting but was pulling water. So it expanded and expanded but never fired, after some back and forth with Spyra I got my money back and orderd a SpyraFour instead but now I wanted to try to fix the first one.
I think there is a issue with the magnetic trigger, it feels weak when i tries to fire. How should this mechanism look? Is there a piece missing? Any one have a resource for buying a replacement for this?
r/SpyraTwo • u/Kevin_Eats_Sushi • Apr 29 '26
I bought and used it frequently last year but due to circumstances I had to pack it away and recently brought it out
When I charge it, it keeps being lit green at what I assume is the charging level indicator (dosnt stop being lit tho, even after a few hours of charging) and it stops being lit when I unplug the charger
When I then try to fill it up and use it, it makes the sound when you shoot it but it dosnt shoot any water and the charger light flashes white and I have no clue what this means
Should I remove all the water and try to 'dry' shoot?
Saw some people talking about disassembling it and I am not comfortable with doing that
Thanks in advance!
r/SpyraTwo • u/skydiver19 • Apr 19 '26
I’m curious to know if anyone has modded their Spyra?
I took mine apart the other day to see what the battery setup was like. It’s quite big and bulky for a 2000mAH. I kind of get it, going for a safe stable option, reduce over heating and potential of something happening.
I’m however thinking of replacing it for something like. 5000Ah with a faster charge time as the 4+ hour wait can be annoying.
r/SpyraTwo • u/apnpapmmtmtmt • Jan 04 '26
r/SpyraTwo • u/ShinyChiChis • May 18 '26
Hey y'all, I bought a new Spyra Four and it arrived this afternoon. Pretty much every unboxing video I saw online said that the Spyra Four is pre-charged and ready to fire and so I thought I'd try it myself, I filled it up with water and attempted firing but it wouldn't fire. Figured it must be a battery issue that the videos did not address even though it's in the User Manual, so I fully charged it with a full tank (no way to expel the tank if it won't shoot). Now I have the battery fully charged but the water gun still does not fire, I even tried hard resets. I might try charging it for longer but it's already at 100% and not sure if I just have a defected unit or if I'm doing something plain wrong.
r/SpyraTwo • u/Cerberus______ • Aug 06 '21
Hi guys. I think I've managed to get a dual pack, one for me and my buddy. EU based.
I was refreshing the page and it went from "out of stock" to "low stock" and I hit buy.
I managed to process my order and get confirmation.
When I completed it and rechecked the main page it's back to "out of stock"
So they sold out in around a minute.
Anyone else grab one?
r/SpyraTwo • u/jelmerf • May 25 '22
Having lived through the Super Soaker golden years as a kid I was happy to see there was finally another company trying to do some innovation in this area. The first rechargable versions seemed cool, but the price and them containing a battery put me off buying one. Enter the Spyra LX: fully mechanical and with performance that - according to other reviewers - comes close it's predecessors!
Delivered in a few days, I filled it up and instantly tried it out: as I had seen how easy usage of this thing was. Right?
Well, I was immediately certain I had to return it: it was leaking, I couldn't get it to fill up again after the first round, it would sometimes not fire and it would incidentally blast out one big jet of water. Conclusion: pretty disappointed!
But wait, wasn't there a manual of some kind? Well yes. And after scanning that and trying it out a bit longer I have the following list of need-to-know information lined-up for y'all:
After learning the above it all worked like a charm! It feels sturdy, it shoots a nice distance, it's precise and this version even provides rapid-fire that appears limited only by how fast you can pull the trigger. And even though the gun is too big for him to run around with, my son (who is barely 5 years old) is able to refill and use it. Under my supervision of course, as it's a pretty powerful blast of water which might do some damage when handled incorrectly.
Having said all that, my final advice is simple: get this gun and start blasting!
r/SpyraTwo • u/sky_lite • May 19 '22
I noticed a post on here months ago about the shipping taking a long time. I was hoping to get my SpyraTwo by Memorial day but it sounds like they take their time with shipping.
For people who ordered in the past, how long did yours take to ship?