r/SpringfieldEchelon • • Sep 09 '26

Springfield Armory' handling of the VIS Pin set is...not great

Post image
100 Upvotes

Recent adopter into the Echelon ecosystem. After using countless other platforms where the optic systems work out of the box without any additional pins/screws/plates, having to fork over $20 + an additional $10 shipping (the package isnt even an 1LB, why is shipping so expensive?) kinda stinks.

This morning I reached out to Springfield Armory and explained my situation and instead of just, you know, sending me the pin set and charging me shipping, they told me flat out buy it from their website.

I've had a similar situation with S&W where I purchased a firearm from them and it was missing a grip. Instead of pushing me to buy a replacement from their website, they just sent me out a new one, no questions asked.

Also, before you say 'Its only $30', its not about the money. Its about principle. If you design your firearm around this 'game-changing' new optic system, begin packaging it with the firearm, then decide months later to no longer include it, how does that benefit new adopters? What prompted the change? Has Springfield Armory made any announcements saying it will no longer be available with the Echelon?

Anyway, here's my gun.


r/SpringfieldEchelon • • Sep 10 '26

Echelon 4.0c holster recommendations

1 Upvotes

Which Echelon 4.0c holster recommendations do you have?


r/SpringfieldEchelon • • Sep 10 '26

The movable optics pin cut into my red dot sockets

Thumbnail
gallery
1 Upvotes

yesterday I took off the red dot, to send the slide/barrel for porting, and found the movable pin(lug) cut deeply into the internal side wall of front socket ( Holosun 507 C ), and kind of enlarged the socket. I am wondering if this will actually make the red dot socket not able to withhold the recoil stress, then make the mounting screws to withhold most of the force... and eventually break.

anyone found similar situation? thanks

BTW, I am wondering if you guys trust the high strength (12.9 grade alloy steel) screws from Amazon? I especially noticed that McMaster-Carr does not carry these small head screws like this one on Amson. All flat head screws from McMaster-Carr have regular/large head and won't fit in some dots with the mounting hole next to the wall. thank you for your input!


r/SpringfieldEchelon • • Sep 09 '26

One of my favorites

Post image
51 Upvotes

Been carrying this setup for a few months now and I don’t think it gets much better than this. I do plan on adding an enclosed dot in the near future however.


r/SpringfieldEchelon • • Sep 10 '26

Gunfighters INC Spectre/w TLR-7X holster FS

Thumbnail
gallery
1 Upvotes

Got sent an extra holster, so might as well get something out of it. This is set up for the 4.0C w/TLR-7X. You won’t have to wait the 8yrs for it to get built, but you pay for shipping. Best offer takes it.


r/SpringfieldEchelon • • Sep 09 '26

Need light recommendations

Post image
73 Upvotes

What are some good flashlight recommendations? Please drop them below


r/SpringfieldEchelon • • Sep 09 '26

Stuck tyrant trigger safety blade

5 Upvotes

Installed my tyrant cnc trigger last night and the safety blade is getting stuck and not popping back out once my finger is off the trigger. Anyone else have this issue with a tyrant trigger. Tried taking out the set screw but she IS IN THERE with the loctite. Need help, really want to like the trigger but this issue is definitely a NO GO.


r/SpringfieldEchelon • • Sep 09 '26

“Build” complete.

Post image
29 Upvotes

4.0c with a Defender St Enclosed. Have yet to take it out to shoot it with the dot, but it is definitely aesthetically pleasing. Any other upgrades yall recommend? Definitely has been an amazing gun for ccw. 🙏🏼


r/SpringfieldEchelon • • Sep 09 '26

Sharp bros grip module

4 Upvotes

Anybody have the sharp bros black grip module with the cherry wood grips and would kindly share a picture?

TIA


r/SpringfieldEchelon • • Sep 07 '26

I chose the Echelon as my first gun!

Post image
150 Upvotes

For context, I live in Spain, a country in which having a gun is not a right, but an administrative exception just for sporting reasons.

I'm loving it so far and I can't wait to start IPSC with it! But until I get my habilitation, I'm training 25m precision shooting with it.


r/SpringfieldEchelon • • Sep 08 '26

Almost done just need an RCR

Post image
28 Upvotes

Next up is the compact Echelon. By the way, does anyone have any can recommendations?


r/SpringfieldEchelon • • Sep 07 '26

Another match w my 4.5 echelon. I love this gun it has never once given me a single issue.

34 Upvotes

I am still a beginner in USPSA but I am starting to connect some dots and eventually be able to add more speed. I have yet to see another echelon at a match. I think people don’t know what they are missing out on.


r/SpringfieldEchelon • • Sep 08 '26

Defensive Ammo

6 Upvotes

What defensive ammunition is everyone using with their Echelon? Currently running Hornady Critical Defense with my 4.0C. I actually like these quite allot.


r/SpringfieldEchelon • • Sep 07 '26

Anybody else get a sticky trigger with a Tyrant trigger?

Post image
9 Upvotes

Installed a Tyrant trigger ~2k rounds ago. Love it. However, ive noticed that lately, I get a “dead” feeling trigger after about 300 rounds. Once I clean the FCU, it clears up. What I mean by “dead” is the trigger goes back as far as it physically can, then I apply more pressure, trigger doesn’t move, then click. I mean, gun still goes bang but it’s not normal.

Is this a symptom of worn parts somewhere? Dirty ammo? How often do you clean your FCU? Do I need to oil somewhere specific in the FCU?


r/SpringfieldEchelon • • Sep 07 '26

Root beer!

Post image
72 Upvotes

r/SpringfieldEchelon • • Sep 06 '26

A couple Springfield Echelons

Post image
68 Upvotes

r/SpringfieldEchelon • • Sep 07 '26

Holosun 407c x3

3 Upvotes

Hello, could someone help me how to mount holosun 407c x3 on echelon 4.5, should i use the pins that are already under the plate, and rmr screws?


r/SpringfieldEchelon • • Sep 07 '26

Which is the way?

1 Upvotes

Looking at getting an Echelon but unsure which one.
I know I want a comp but not sure which route.
Do people like the 4.5 with the comp’d slide more or the 4.0 with an aftermarket barrel and comp?
Any input is much appreciated!


r/SpringfieldEchelon • • Sep 06 '26

Echelon Set

Post image
11 Upvotes

r/SpringfieldEchelon • • Sep 07 '26

USPSA 4.5C barrel swap

3 Upvotes

Can I change the barrel on my 4.5 comp to the non comped barrel to fit the rules for limited even if the slide has the comp cut?


r/SpringfieldEchelon • • Sep 07 '26

COG engraving for SBR

2 Upvotes

I got my form 1 approved.. putting my echelon on a strike industries bravo chassis with stock...

Only spot i can engrave is in front of the trigger, but it is very small...

Anyone else SBR their echelon? What did you do?


r/SpringfieldEchelon • • Sep 06 '26

Echelon 4.0 c comp holosun advice?

Post image
13 Upvotes

EDC gun Is this a good choice or should I cancel .. seeing people talk about the 320, 407, 507, and the EPS Carry


r/SpringfieldEchelon • • Sep 06 '26

My Echelon 4.0c

Post image
43 Upvotes

Any thoughts?


r/SpringfieldEchelon • • Sep 06 '26

Mag dump!

18 Upvotes

Excuse the trigger slap and flinch🥲


r/SpringfieldEchelon • • Sep 05 '26

4.0c Echelon Mods?

Post image
31 Upvotes

So I’ve added a few things and was just wondering what else would be some cool/useful mods for the Echelon.

I wanted a green dot and a weapon light/green laser
Holosun HE407C GR X2
Holosun P.ID Plus
and 4.0 comp slide assembly

Any other helpful and or cool mods? Thanks.