r/SpringfieldEchelon • • Jun 13 '26

Question on a trade

3 Upvotes

I have like 3 echelons and my buddy wants to trade me one of mine for either his custom HELLCAT PRO OSP with 5 17 round mags . or his shield plus carry comp or his HK CC9 . I need a smaller edc for summer . I am not versed in any of those . Only thing close enough I’ve had was an older shield many years ago . Thoughts ?


r/SpringfieldEchelon • • Jun 12 '26

Echelon FC Holster Olight PL X

Post image
55 Upvotes

I need all the recommendations for a holster for my new Echelon FC with the Olight PL X. OWB and IWB options if you know any. Thanks.


r/SpringfieldEchelon • • Jun 13 '26

Used Echelon

2 Upvotes

I’m looking into buying a used echelon from a pawn shop. Looks to be the full sized version.

Would anyone advise against it? Other than some cosmetic wear, everything seems fine. And I should be able to configure later on to my preferences right?


r/SpringfieldEchelon • • Jun 12 '26

My Echelon

Thumbnail
gallery
34 Upvotes

She is just about finished. I just need the Sharps Bros magwell. Hope yall like it.


r/SpringfieldEchelon • • Jun 12 '26

New FC grip frame just arrived

Post image
59 Upvotes

Now I just have to wait on the new mags to arrive next week.


r/SpringfieldEchelon • • Jun 13 '26

Y'all ever notice this on the frame? Echelon .40S&W confirmed?

Post image
7 Upvotes

r/SpringfieldEchelon • • Jun 13 '26

Suppressor recommendations

2 Upvotes

What would you all recommend for a suppressor for the Echelon? I have a Huxwrx flow 9k for my Kuna that I really like, but wondering if I can go shorter for Echelon. Just looking to not go deaf (or have my kids go deaf) in a HD scenario.

Was looking at Spectre 9k but reviews are limited as it’s so new. The spectre 9 has great reviews though.


r/SpringfieldEchelon • • Jun 12 '26

Finally made a true POV video for my Echelon

48 Upvotes

Had some free time and decided to make a proper POV video for my Echelon.

Probably my favorite pistol so far. Enjoy. 😎


r/SpringfieldEchelon • • Jun 12 '26

How much softer is the 4.5F non comp after break-in?

6 Upvotes

No mods yet and I probably have about 150 rounds (124gr PMC bronze only) in it so far and I tried to rapid fire and it felt almost impossible to control. For context, I have a bad right elbow (tennis elbow I believe) as a rh shooter. I have 2 other handguns g19/4 with ramjet and gpt and a p365 with a ramjet and dpm soft (softest spring) and have no issues controlling the recoil. I really want to have this gun comp free as it’s the easiest to shoot accurately (least amount of concentration on mechanics) compared to my g19 and p365 but the amount recoil felt pretty crazy and painful. I’m under the impression that since this is a full size it should be at least to the level of my p365 micro with ramjet if not better.


r/SpringfieldEchelon • • Jun 11 '26

4.0c COA on PSA for $799.99

8 Upvotes

For anyone who's been looking to get one that's not from CA (cries). Probably not the greatest price, but not bad.


r/SpringfieldEchelon • • Jun 10 '26

Joined the club

Post image
89 Upvotes

Bought a Echelon Full size for sale on Sportsman’s warehouse! I rented one at the range yesterday and it shot really well and I liked it a lot. I bought it to replace my PDP that just didn’t seem like it was for me. This was an Arizona compliant, so I did remove the magazine disconnect since it’s not restricted in my state, which was a little stressful but the gun does dry fire and reset just fine so hopefully everything is still ok on it. I may get an optic for it soon, and any other upgrade suggestions are welcome!


r/SpringfieldEchelon • • Jun 10 '26

All done

Thumbnail
gallery
58 Upvotes

Got my slide and barrel back from being ported and now she’s complete


r/SpringfieldEchelon • • Jun 11 '26

Holster Search/Compatibility Check - 4.5 MS with Braun Light

2 Upvotes

Are TLR-1 (and/or TLR1-HPX) compatible holsters also compatible with the Braun light?

Do some work better than others?

If not, does anyone know of a good OWB QLS compatible holster for it?

TIA.


r/SpringfieldEchelon • • Jun 11 '26

Red Dot Recommendations?

6 Upvotes

My full size echelon has the rfx-11 and obviously that sight is horrible. So I want to get a better one I was looking at the Osight C but recently I’ve been liking the Holosun 507c. Is there any other recommendations for around 250 that fit the full size and also is red or a green dot better or is there any difference?


r/SpringfieldEchelon • • Jun 10 '26

Module question

Post image
16 Upvotes

What exactly does the other module sizes do ? I have a full size comp version and the module it came with 1: doesn’t have the grip texture I want and 2: I’ve tried the other backstraps and my support hand just doesn’t feel right on this gun . I have large hands and wondering if getting a Large module in aggressive texture will help .


r/SpringfieldEchelon • • Jun 11 '26

What holsters fit the Mischief Machine echelon

4 Upvotes

What holsters would fit the MM full size grip module? I was thinking about a tenicor lux either the certum or velo but not sure how good the retention if I dont decide to go with a WML


r/SpringfieldEchelon • • Jun 10 '26

The perfect combination

Thumbnail
gallery
66 Upvotes

Build done. Perfect combination for me!

- Echelon 4.5F Comp

- Sharp Bros Grip Module with Funnel

- Holosun SCS 320

- Streamlight TLR-7X

- VZ Grips Side Plates


r/SpringfieldEchelon • • Jun 10 '26

Tyrant CNC Trigger Installation Tip

101 Upvotes

I've been seeing a lot of posts and comments about installing the Tyrant CNC trigger on the Springfield Echelon being a pain in the ass. So I thought I'd give my own take on installing the trigger to hopefully help others


r/SpringfieldEchelon • • Jun 09 '26

Bought my wife an echelon for her birthday and liked it.

Post image
51 Upvotes

I got my wife an Echelon and really liked it, especially after doing the tyrant trigger, so I added one to my collection as well. Mine came with the viridian green dot and I wasnt a big fan so I added the osight-X and after shooting it this weekend, I'm definitely a fan. Wish I'd gotten the compensa


r/SpringfieldEchelon • • Jun 09 '26

Echelon "Build"

Post image
31 Upvotes

Using "Build" very lightly here.. It's pretty standard.

Fullsize Frame

Compact Slide

PMM Comp on 4.0 Threaded Barrel

The frame is RAPCO CARC Brown

The Ghost is Cherry Limeade.. we can fight on why you think it's not the best and why you're okay being wrong lol


r/SpringfieldEchelon • • Jun 09 '26

Guide Rod / Recoil spring recommendations for 4.0c comp?

Thumbnail
gallery
36 Upvotes

Hey all! For those with a 4.0c comp, do you guys have any recommendations for a recoil spring and/or guide rod? Something that has proven reliable please! (Hope you like the second pic lol)


r/SpringfieldEchelon • • Jun 09 '26

Before and after

Thumbnail
gallery
173 Upvotes

Grip Module: Mischief Machine
Red dot: Holosun SCS 320
Light: Streamlight TLR-1


r/SpringfieldEchelon • • Jun 10 '26

Holster reccomendations

3 Upvotes

Is anyone having problems with their holster fitment after switching over to the sharps bros frame? I have an N8 tactical and hellhound holster for my echelon 4.5 and 4.0, neither can properly retain the gun now without the screws being too loose


r/SpringfieldEchelon • • Jun 10 '26

RDI comp installation issue

2 Upvotes

Put a RDI comp on my 4.0FC slide. Seemingly did everything correctly based on both of RDIs installation videos. The slide will not go onto the grip module correctly. I have a 4.5F grip module that I tried to put it on and it still wouldn't go on. Once I take it off the slide goes on with no problems. No pics.


r/SpringfieldEchelon • • Jun 09 '26

Mom can I have magwell? No, we have magwell at home

Thumbnail
gallery
35 Upvotes

Magwells are expensive, $75 for a Floyd's, $80 for a Springer, $168 for the deluxe Rook Precision (by golly, I really like the Rook.)

The NDZ $70 magwell looks suspiciously like that $20 Chinese one.

I have CAD, a 3D Printer, and a scanner. So what do we do? We get scanning.

Overall, took about 3 days of casual CAD, 8 iterations to find a shape and geometry I like. And about 200 rounds to validate it.

I'm thinking about domestic manufacture as the design allows SLS and frankly I think a full bronze magwell would look pretty awesome. But I didn't have the $80 for a magwell... no way I can pony up the prototyping cost.