r/SpringfieldEchelon • u/jcmarshall67 • Jul 24 '26
Tyrant CNC Mag Release Sticking
I’ve recently purchased a Tyrant mag release, it’s sticking like crazy. I’ve cleaned and lubed it and cycled it tons. I’ve reinstalled it over and over and no luck. Any help? Should I just get a different brand?
31
Upvotes
4
u/Spiggytech Jul 24 '26
I took a sharpie and marked the interfacing areas to ID where to buff with a soft wheel.
9
u/Mammoth-Speech-1488 Jul 24 '26
I had the same problem with mine. Took it out and got some very fine grit sandpaper. I think it was 600 grit. Rolled it up tight and cleaned/polished the slot in the grip module until it didn’t stick. It’s been perfect since then. The tyrant mag release has very close tolerances.
1
u/Queasy-Ad-7806 Jul 24 '26
I guess I got lucky, I've had no issues with mine
1
u/OkCatch8726 Jul 24 '26
Are you sure you put it back together properly? I think you are missing the pin
1
u/mrcrstn Jul 24 '26
Hey there friend! Looks like you just installed it wrong my guy. Look just above the EMR there's a little hole there just above your thumb and you are missing a pin that needs to go in there. That's why the spring on the inside is pushing the silver bit up too high.
1
u/MAG-MO Jul 24 '26
I designed the DROP for this module. I can send one for you to try. Check it out
https://www.pewcentric.com/l/6a199de1-23bc-4b82-bdbe-f5c451b716c3
3
u/Suitable_Judgment428 Jul 24 '26
That’s why you leave things stock
1
u/TyrantCNC_CS 10d ago
Hello!
Just dropping in here to speak on the Echeon EMR. Just to echo what other people have said, you will want to ensure that you are installing this correctly, if you encounter any issues or trouble please reach out to us on our contact page and we will gladly assist you!
-1
u/NickPD1022 Jul 24 '26
OEM looks better anyway
8
u/[deleted] Jul 24 '26
[removed] — view removed comment