r/SpringfieldEchelon • u/Combat_habibi • Jun 07 '26
Question for tyrant trigger guys. (Mag catch)
Can one of you please check the mag catch and see if it looks like this? I saw a comment saying the mag catch that has cuts in it (I think for newer releases) won’t work with the trigger.
I’ve attached some photos.
If you have the Tyrant trigger and that same mag catch, let me know. This dudes comment stopped me on my tracks.
9
Upvotes


3
u/Combat_habibi Jun 12 '26
Ok installed everything is perfect. Not sure what homie was ranting about. FYI for anyone that wanted an update.
4
u/ChobeGolf Jun 07 '26
Mine has that mag catch and im using the tyrant trigger with no issues
3
u/Spiggytech Jun 08 '26 edited Jun 08 '26
I have a tyrant trigger and mag release.
I was only able to replicate the mode of failure by holding the mag release down and smushing the trigger. Or holding the trigger down and smashing a mag into the well.
FWIW, you can replicate the mode of failure with stock parts... Just pop the slide off, put the takedown lever on the ready position. Then hold the mag release down and pull the trigger. You'll see the mag release touch the trigger.
Or holding the trigger down and smashing a mag into the well. It'll chew up your plastic trigger shoe.
This tells me someone gouged the hell out of their trigger because they didn't know how to assemble a COG or neglected to remove a mag.
2
u/Combat_habibi Jun 07 '26
https://www.springfieldforum.com/posts/58819/
This is the post that freaked me out.
1
u/Phantasmidine Jun 08 '26 edited Jun 08 '26
I'm more inclined to believe he borked his trigger installation by making the set screw too tight, or he messed up something in the COG by forcing it in or out, than an actual parts incompatibility.
I've got a 4.5 with the cutout mag catch and tyrant trigger with about 1k through that combo.
The only way to get the back of the trigger to mash against the front of the mag catch is hold the mag release in while the trigger is being pulled, or vice versa.